The Peerless-AV DS-LEDUNV610-8X8 SEAMLESS Universal dvLED Mounting System is a cost-effective, kitted solution for wall mounting a 8 x 8 video wall using 610 mm wide latching dvLED displays. The lightweight aluminum frame and quick-connect clamps allow for quick and easy installation. The display adapters and mount frame feature a slim design with X, Y, and Z axis adjustments to overcome wall imperfections and ensure the video wall remains flat. All assembly and mounting hardware as well as universal spacers are included.

For 610mm Wide Latching dvLED Cabinets    Preconfigured for a 8 x 8 Video Wall    Weight Capacity of 52 lb per Display    X, Y & Z Axis Adjustment

• Universal design is compatible with the majority of latching dvLED displays
• Universal spacer precisely spaces the horizontal extrusion for either landscape or portrait cabinet orientation
• Spacer also includes built-in calipers for measuring uncommon cabinet sizes
• X, Y, and Z axis adjustment creates a seamless video wall by enabling the mount to overcome wall imperfections
• Quick-connect clamps allow installers to attach the displays to the mount frame quickly and easily
• Open architecture provides ease of cable management
• Condensed packaging reduces environmental impact, shipping costs, and warehouse space when storing
• Optional Trim Kit Accessory is compatible with most displays (DS-LEDTK Models)

Related Questions and Answers

Q: 1. Do you know if this will work with the countryman B3 lav?

A: While it may be a snug fit, this mount should fit the Countryman B3.

Q: 2. Is this v mount only for small rig batteries ?

A: Smallrig has yet to release this information. The SmallRig Compact V-Mount Battery Mounting System is specifically designed for the height of the SmallRig Mini-V Mount Batteries. V-Mount is a standard mount, so long as the v-mount battery in question does not exceed the height and length of the Small Rig Mini V-Mount Batteries then it should work.

Q: 3. How fast can you drive while this mount is holding a camera setup at or a little below weight capacity?

A: The manufacturer does not publish a speed limit for this product but it is always recommended that users secure the camera and entire rig with safety cables should it ever come free.

Q: 4. Will this work with any Tripod (peak design) or only ones with round tube shapes?

A: This is a tablet holder. It can be attached via a variety of methods. The leg shape is irrelevant to its use.

Q: 5. Works with Sennheiser ME2 capsules? Thank

A: Yes the Rode invisiLav Discreet Lavalier Mounting System will work with an ME2.

Q: 6. What safety accessory would you suggest to pair with this?

A: I don't think you need anything please read our customer reviews. If you have any more concerns please reach out to Matthews.

Q: 7. does the design of this rig make it difficult to mount the gimbal low to the ground? for example: with 1 cup connected low to the bumper and 2 cups connected to the flat/gently-curved part of the trunk/hood, it looks to me like the diagonally-mounted support strut might be easily blocked by the edge of the hood/trunk when trying to connect it from the vertical to the horizontal piece ~ does this make sense? thoughts?

A: There are a number of different ways to mount this support depending on the accessories that you would like to purchase with it and where you want to position it on the car. for example to get low angle shots it seems imperative that you purchase some single handed gimbal ( like the Ronin RS2). On the sides of the car it would be quite easy to get a low angle shot when mounted to the car door on the front or back of the car it seems as though it would be quite difficult. The design of the car will also affect how easy/difficult it is to get the shots that you want. for example in the photos they used a BMW Sedan which poses a challenge when mounting this rig to the rear but if they were to swap that car for an SUV, or mini van then there would be a lot more surface area on the back of the car making it feasible to get a low angle shot from the back.

Q: 8. Will this fit other lav mics, such as the Polsen OLM-10?

A: It does not fit my Sony Lav mics. The holes are too small.

Q: 9. Is this compatible with the Canon r8?

A: Yes, the SmallRig Advanced V-Mount Battery Mounting System is compatible with the Canon EOS R8 Mirrorless Camera.

Q: 10. Can you mount the battery upside down? so the screen is not covered while the chest pad is still in the correct space

A: The battery on the SmallRig Advanced V-Mount Battery Mounting System can swing down. There is no good configuration for mounting the battery upside-down.