The Peerless-AV DS-LEDUNV960 1:1 SEAMLESS Kitted Universal dvLED Mounting System for Cabinets Up to 960mm Wide is a cost-effective solution for creating custom video wall configurations when using 960mm wide latching dvLED displays. The lightweight aluminum frame and quick-connect clamps allow for quick and easy installation. The display adapters and mount frame feature a slim design with X, Y, and Z axis adjustments to overcome wall imperfections and ensure the video wall remains flat.

This is a single display mount. It is intended to be combined with multiple mounts and the Peerless-AV DS-LEDUNVSPACER universal mount spacer (sold separately).

For 960mm Wide Latching dvLED Cabinets    Single Display Mount to Customize Layout    Weight Capacity of 52 lb per Display    X, Y & Z Axis Adjustment

• Universal design is compatible with the majority of latching dvLED displays
• Universal spacer precisely spaces the horizontal extrusion for either landscape or portrait cabinet orientation
• Spacer also includes built-in calipers for measuring uncommon cabinet sizes
• X, Y, and Z axis adjustment creates a seamless video wall by enabling the mount to overcome wall imperfections
• Quick-connect clamps allow installers to attach the displays to the mount frame quickly and easily
• Open architecture provides ease of cable management
• Condensed packaging reduces environmental impact, shipping costs, and warehouse space when storing
• Optional Trim Kit Accessory is compatible with most displays (DS-LEDTK Models)
• Maximum size: Up to 32' wide by 9' tall (based on display size), please contact Peerless-AV for configurations that exceed this limit.

Related Questions and Answers

Q: 1. Would this be suitable for side mount options like a hostess tray set up?

A: You could for small cameras.

Q: 2. Will this work with a gimbal? Looking to mount an M5/C100 combo with a ninja star.

A: Yes, most gimbal heads should work. The head comes off this kit so you can change that for a different head.

Q: 3. Has anyone tried this with a ronin-m and dslr?

A: Not to my knowledge the Pro mount does not have large enough suction cups.

Q: 4. Can this work with 5' monitors?

A: While this product is designed to hold a 7" monitor a 5" monitor should work in it as well. It will just be a bit loose as it fits in the case.

Q: 5. How fast can you drive while this mount is holding a camera setup at or a little below weight capacity?

A: The manufacturer does not publish a speed limit for this product but it is always recommended that users secure the camera and entire rig with safety cables should it ever come free.

Q: 6. After full assembly, how long will the arms extend?

A: Since you would have (4) 20 arms and (1) 8 arm, you can essentially get 88 of reach out of the system. The maximum reach is really dependent on where you position each suction cup and grip head.

Q: 7. Can you mount the battery upside down? so the screen is not covered while the chest pad is still in the correct space

A: The battery on the SmallRig Advanced V-Mount Battery Mounting System can swing down. There is no good configuration for mounting the battery upside-down.

Q: 8. Is this compatible with the Canon r8?

A: Yes, the SmallRig Advanced V-Mount Battery Mounting System is compatible with the Canon EOS R8 Mirrorless Camera.

Q: 9. does the design of this rig make it difficult to mount the gimbal low to the ground? for example: with 1 cup connected low to the bumper and 2 cups connected to the flat/gently-curved part of the trunk/hood, it looks to me like the diagonally-mounted support strut might be easily blocked by the edge of the hood/trunk when trying to connect it from the vertical to the horizontal piece ~ does this make sense? thoughts?

A: There are a number of different ways to mount this support depending on the accessories that you would like to purchase with it and where you want to position it on the car. for example to get low angle shots it seems imperative that you purchase some single handed gimbal ( like the Ronin RS2). On the sides of the car it would be quite easy to get a low angle shot when mounted to the car door on the front or back of the car it seems as though it would be quite difficult. The design of the car will also affect how easy/difficult it is to get the shots that you want. for example in the photos they used a BMW Sedan which poses a challenge when mounting this rig to the rear but if they were to swap that car for an SUV, or mini van then there would be a lot more surface area on the back of the car making it feasible to get a low angle shot from the back.

Q: 10. Can these mounting brackets be used with the newer UniFi WiFi 6 Lite APs to mount them to a single gang low voltage box?

A: The Ubiquiti Networks UniFi Professional Mounting System is compatible with UAP-AC-PRO, UAP-AC-HD, UAP-AC-SHD, and above.