Ideal for electric guitar, bass, violin, and other stage instruments with either an active or passive pickup, the A58 Wireless Guitar System from Xvive Audio is a 6-channel plug-in wireless system that uses 5.8 GHz operation to virtually eliminate interference. With high-res 24-bit / 48 kHz audio and less than 5 ms of latency, the A58 system makes live performances cleaner and more convenient.

The A58 is a true diversity wireless system, providing superior audio quality and reliability over nondiversity systems. With six channels available, it's easy to find a clean channel, and the convenient autoscan function let's you find that channel quickly. Both the transmitter and receiver sport up to five hours of operation on a single charge, and the internal rechargeable batteries can be serviced and replaced if needed with an easy-to-access battery compartment. The A58 wireless system includes a USB-A to dual-USB-C charging cable (for charging both transmitter and receiver from one outlet), and it comes with a carrying case.

Ideal for Stage Use    5.8 GHz Band Eliminates Interference    True Diversity Wireless System    High-Resolution 24-Bit / 48 kHz Audio    6 Wireless Channels    Less than 5 ms Latency    Autoscans to Find Best Channel    Up to 5 Hours of Battery Life    Compatible with Active & Passive Pickups    Includes USB Cable and Carry Case

In our increasingly wireless world, the commonly used 2.4 GHz band has become more and more crowded with things like Wi-Fi networks, Bluetooth communication, and most current digital wireless audio systems. Using 5.8 GHz pushes your transmission out of this crowded sector and provides a rarely used bandwidth that practically guarantees interference-free communication. On top of that, the A58 System has been fine-tuned for optimal performance and guitar tone.

A58 offers both Active and Passive modes, making it compatible with all pickups—from passive to high-output active pickups. When using a guitar or bass with active pickups, press and hold the transmitter’s Channel button for 3 seconds to turn on Active mode. When Active mode is on, the Active LED will illuminate.

Access to the battery compartment makes it easy for professional maintenance personnel to perform maintenance and testing on the battery as needed, giving you increased mileage.

Related Questions and Answers

Q: 1. How do I choose which frequency spectrum would be best for my application?

A: It depends.. if you are in a rural area it does not make much of a difference, however, if you are in an urban or suburban area you may want to consult the Shure Frequency Finder: https://www.shure.com/en-US/support/tools/frequency-finder

Q: 2. I would like to know the delay between the audio signal and the signal you hearIs there a delay or not?

A: No perceptible delay with mine. I haven't tried to measure it.

Q: 3. Could I use this unit directly in between Sennheiser MKH416 mic and Sennheiser G3 Plug-on transmitter to transmit audio?

A: Yes, it is possible to use the Xvive Audio P1 Portable Phantom Power Supply to connect a Sennheiser MKH 416 Shotgun Microphone to a Sennheiser SKP 100 G3 Plug-On Wireless Transmitter.

Q: 4. Can the Xvive P1 Phantom PS be connected to a TS mono mic level audio input using a XLR female to 3.5 TS mini jack cable?

A: Yes, you can use the Xvive Audio P1 Portable Phantom Power Supply to connect an XLR microphone that requires phantom power to a 3.5mm microphone input using an XLR female to 3.5mm TS male mini-jack cable.

Q: 5. how can i power the motor from other than dtap?

A: you Can power the motors from from the fiz and handle units although this defeats the purpose when using the fiz. You could also purchase a V-mount adapter so you can use a V-mount with a ptap.

Q: 6. will it work with 19mm rod?

A: Yes it will. This comes with two 19mm Motor Rod Clamps along with two 15mm Bushings. This works with both 19mm and 15mm rods.

Q: 7. How do I get rid of the green line at the bottom of the display?

A: It sounds like the j5create Wireless HDMI System (196.9'), BH # J5JVAW53, has resized the transmitted image. Go into your monitor or television's settings and try to adjust the size or overscan.

Q: 8. Could I use this to power my Rode NTG1 and output to a XLR to 3.5mm adapter cable to input into a Canon 90D?

A: Yes, the Xvive Audio P1 Portable Phantom Power Supply with Rechargeable Battery can be used to provide phantom power to the Rode NTG1 Shotgun Microphone, and its output signal can be adapted for a 3.5mm input connection to a DSLR camera.

Q: 9. is this device can power 12t microphone?

A: The Xvive Audio P1 Portable Phantom Power Supply with Rechargeable Battery supplies 12 or 48V of phantom power, but does not supply 12V of T power. Although phantom power will not generally damage a T-powered microphone, they use different circuitry and T-power microphones cannot be properly used with phantom power supplies. A recommended T-power product can be found in the Denecke Dcode PS-T Microphone Power Supply (BH #DEPST): https://bhpho.to/3vd9fT2

Q: 10. Can one transmitter be used to two receivers?

A: Yes, the audio from one Xvive Audio U3T 2.4 GHz Digital Wireless Transmitter can be sent to two receivers.