Generate test signals for your SDI or HDMI equipment with the MuxLab HDMI 2.0 12G-SDI Signal Generator V2from MuxLab. The generator provides 37 test patterns, refresh rates, different color spaces, and a variety of preset resolutions up to 4K60 4:4:4 over 12G-SDI and HDMI 2.0 connections. It is designed for engineers, installers, IT data centers, and integrators.

Other features include a 3" LCD panel to preview and configure patterns, HDCP and EDID management support, 10 configurable presets, 3.5mm analog audio input, and support for RGB and YUV color spaces. The unit can be configured using free management software via USB or using the RS-232 serial port. To create a full signal test environment, the generator works in conjunction with the separately available Signal Analyzer 500831 to add connectivity and quality tests to your setup.

Test Tool for SDI and HDMI    Generates Test Patterns    Supports Resolutions up to 4K60    Li-Ion Battery, 5-Hour Operation Time    3" LCD Display, HDCP/EDID Support    Supports up to 7 Audio Channels    USB or RS-232 Serial Control    Works with Optional Signal Analyzer

• Supports HDMI up to 4K60, 3D, and 12G-SDI
• Supports RGB 4:4:4, YUV 4:4:4, YUV 4:2:2, YUV 4:2:0, and Deep Color
• Supports 37 preset patterns and 43 preset resolutions
• 3" LCD panel for pattern preview and menu settings
• Supports up to 7 audio channels
• Supports HDCP on/off, for testing HDCP 1.4 and 2.3
• Supports EDID management
• Locally or remotely managed via RS-232 or USB
• Free Windows management software

Related Questions and Answers

Q: 1. I understand the HDMI dynamic. So all the BNC inputs can use a standard SDI BNC cable from camera source to monitor input? I don't need a 12G-SDI BNC cable.

A: as long as the SDI cable supports the resolution being tranmitted

Q: 2. Do we have a specific ETA on these units? I need to buy some immediately. Also- will these units work multimode?

A: We are currently saying December time but we do not have an exact date. The SFPs are Single Mode. It is possible to use Multimode fiber for shorter lengths.

Q: 3. Update previous question, Can 3D luts use separately?

A: There are 2 LUTS which may be used but only one applied at a time.

Q: 4. hello! would this show up on a MAC as an output device? OR A SECOND MONITOR / DISPLAY? thanks!

A: The AJA T-TAP Pro Thunderbolt 3-Powered Converter with 12G-SDI and HDMI 2.0 Output will appear in an NLE or other software to output footage via HDMI or 12G-SDI to another source.

Q: 5. Can you use a standard BNC cable with this monitor in all of the inputs?

A: No, the unit offers the following in and out inputs. 2 x BNC (12G-SDI) Input 2 x BNC (3G-SDI) Input 3 x HDMI Type A (HDMI 2.0) Input 2 x BNC (12G-SDI) Loop Output 2 x BNC (3G-SDI) Loop Output 1 x HDMI Type A (HDMI 2.0) Loop Output

Q: 6. Hi,We have Sony FS 7 , 4K cameras & 4 k upgraded FOR A HVS 110 switcher,We want to use this for 4 K Live production, we want your guidance on converting the 4K Hdmi output from Sony FS 7 camera to 4 K quad input of our FOR A switcher....with minimum of 70 mtr cable length,We are thinking of going for Teranex Mini - HDMI to SDI 12G - From camera end & re-converting to 4 k quad output with Teranex Mini - 12G-SDI to Quad SDI - at the switcher end , is it feasible to this with 70 - 80 mtrs of cable length with this converters, will it take this load for minimum 5 - 6 hours of production,will it gets heated up beyond the permissible limit, If it can take this load which cable you will recommend,Pl give us your technical opinion & options as we are not able to test it with our equipment, RegardsShashikant

A: We suggest using this extender to run the HDMI signal: KanexPro HDBaseT HDMI Extender B&H # KAEXTHD100HT. Then at the switcher convert the signal with this: AJA HA5-4K 4K HDMI to 4K SDI Mini-Converter B&H # AJHA54K. So that we may best assist you if you have further questions, please email us at provideo@bhphoto.com.

Q: 7. Will it work as a second monitor on a mac?

A: You can connect the extended or mirrored desktop into this converter via HDMI and connect an SDI monitor to the output if you wish.

Q: 8. Can it output from Macs that don't have support for external HDR displays?

A: The AJA T-TAP Pro Thunderbolt 3-Powered Converter with 12G-SDI and HDMI 2.0 Output would support the following applications and allow you to output to HDR displays. See software compatibility. https://bit.ly/3GFz7dP

Q: 9. Can you use the sfp for video over fiber?

A: Yes, the Lilliput Q17 17.3" 12G-SDI/HDMI HDR Monitor has an optical fiber input for video. Please add the optional SFP below: Lilliput 12 Gb/s Video SFP+ Optical Transmitter BH #LI12GSFPLCTX https://bhpho.to/3Z7aQ9P

Q: 10. Can this T-Tap cross convert so the different outputs are send out different formats?

A: no it can not.