Elevate your line arrays, trussing, or LED screens with the ProX XTF-FT5323 FANTEK Spain Compact Front Loading Lifting Line Array Systems Towers, a complete lifting system that's ideal for touring, rental, and event production (also concerts, events, trade fair stands, stage construction, fitting-out discos, theaters, broadcasting, TV, and more).

The front-loading tower is specifically designed to reliably lift line-array systems weighing up to 518 lb and with a maximum height of 16.33'. The compact design with castors gives each XTF-FT5323 tower easy handling and maneuverability; and with a folded height of only folded height of 5.62', it also reduces storage space. The system includes an XTF-ATF16PA Line Array Adapter with hanging rings.

For Studios, Stages, and Sets    Effortless Elevation of Heavy Loads    Line Arrays, Trusses, and LED Screens    Integrated Casters for Maneuverability    Includes XTF-ATF16PA Line Array Adapters    Includes Hanging Ring

• Designed to fly line array systems, trussing, and LED screens
• Built from quality components to ensure maximum safety
• Raise the load from the floor.
• CE - DGUV V17/18 Certified Compliant
• XT-FT5323 is made by FANTEK in Valencia, Spain.
• Minimum Height: 5.62'
• Max Height: 16.33'
• Max Load: 518 lb
• Winch Load: 1003.10 lb
• Steel Loading Forks: 19.68"

Dynamic Overlap stacking trusses (4 Masts) are manufactured with extruded aluminum (Alloy: EN-AW according to 6082 T6) and TIG welded by Certified Welders for maximum safety. They are designed to be compact when folded, reducing storage space and making it easier to handle. FANTEK towers use a reinforced steel base with outriggers that support heavy loads and greater heights. During lifting, the tower telescopic mechanism lift can stop safely at any of the Pin Locking System positions. These pins take the load off of the wire rope.

DYNSYS is a system designed to guarantee the operational health of the tower, since it accomplishes many functions, all focused on maximizing user safety. Each DYNSYS system is adjusted to control the torque that is applied on the winch. When this is exceeded, the system acts and prevents the lifting process.

WIREDRIVE is a multidirectional grooved pulley that reduces the wire angle between the winch drum and its entry to the first mast. The steel base provides great stability when the adjustable screw-jacks are well balanced and the bubble level on the base provides accurate leveling.

Related Questions and Answers

Q: 1. Will Nikon Zf with 24-70mm lens fit in this case?

A: Yes, the Nikon Zf Mirrorless Camera with 24-70mm f/4 Lens will fit inside the Lowepro Adventura TLZ30 III Top Loading Shoulder Bag (Black).

Q: 2. Will a Nikon Z6II with the 24-70 f4 lens fit in this case?

A: While it may fit, the Lowepro Adventura TLZ30 III Top Loading Shoulder Bag (Black) may be too snug to accommodate both the Nikon Z6 II Mirrorless Camera and the Nikon NIKKOR Z 24-70mm f/4 S Lens, making it hard to remove the camera/lens setup. As such, I would instead recommend to purchase the slightly larger Lowepro Photo Active TLZ 45 AW Top-Loader Camera Bag (Black) to accommodate the Nikon Z6 II Mirrorless Camera and the Nikon NIKKOR Z 24-70mm f/4 S Lens.

Q: 3. Will this fit the Sony A7 IV with the Zeiss 55mm 1.8?

A: Yes this bag should hold the Sony A7 IV with the Zeiss 55mm 1.8.

Q: 4. Will this fit a Lumix dc-G9?

A: The Lowepro Adventura TLZ20 III Top Loading Shoulder Bag has interior dimensions of 5.3 x 5.1 x 3.5", and the Panasonic Lumix G9 Mirrorless Camera's dimensions are 5.39 x 3.83 x 3.61", so the bag will not fit the camera.

Q: 5. Will a canon r6 with attached rf 70-200 f4 with lens hood fit inside? Thank you

A: Yes, the Tenba Axis V2 Top-Loading Camera Bag (Multicam Black, 4L) will accept that camera and lens combination.

Q: 6. Will Canon R10 with 18-150mm lens fit in this case?

A: The Lowepro Adventura TLZ30 III Top Loading Shoulder Bag will be very tight with that combination. I recommend getting a size larger such as the Ruggard Hunter Pro 55 DSLR Holster Bag BH #RUPHB655B

Q: 7. Is this bag waterproof or weather resistant?

A: No, the Lowepro Adventura TLZ20 III Top Loading Shoulder Bag (Black) does not have any weather proofing.

Q: 8. Will this fit a Canon EOS R7 Mirrorless Camera with 18-150mm Lens?

A: Yes, this will fit an EOS R7 and the 18-150mm lens attached.

Q: 9. Will a Nikon Z f with a Nikon Z 24-200 fit?

A: The Lowepro Adventura TLZ20 III Top Loading Shoulder Bag (Black) is not large enough to carry the Nikon Zf and the Nikon NIKKOR Z 24-200mm f/4-6.3 VR Lens; the Lowepro Photo Active TLZ 50 AW Top-Loader Camera Bag (Black) (LOLP37346) would be big enough to carry that camera and lens.

Q: 10. This bag is only made of soft cushioning material, there is no hardshell material in it, so does not protect against sharp hit?

A: It depends on the sharp hit. If you drop the Lowepro Adventura TLZ30 III Top Loading Shoulder Bag on the floor it will protect the camera against that. If you need protection against a sharp knife for instance than you would need a hard shell case.