Craft captivating displays on walls, floors, and ceilings with the American DJ UBL12H, a 42" versatile LED linear fixture with twelve 20W, 6-in-1 HEX LEDs (RGBAL+UV) well suited for uplighting, downlighting, stage washing, and dancefloor illumination. The inclusion of the lime LED chip allows for a high CRI of >90, which ensures the fixture’s output will render colors accurately when used to illuminate scenery, décor, and people.

The LEDs are arranged in independently controllable pairs or groups of three, allowing for smooth color mixing, while creating of a wide variety of hues and shades. Additionally, the fixtures can also be used to generate white light output with color temperature variable between 2300 and 9900K. For even more versatility, the UV element allows the creation of a "blacklight" effect, causing white and neon colored décor and clothing to glow when used alone. The UBL12H comes complete with an indoor locking power cord, UC-IR24 remote, and a 20° diffusion filter.

For Uplighting, Downlighting, Wash, FX    12 x 20W, RGBAL+UV 6-in-1 LEDs    0 to 100% Dimming; 6 Modes, 4 Curves    17° Beam Angle/20° with Diffusion Filter    Smooth RGBAW+UV Color Mixing    64 Built-In Color Macros    Includes Diffusion Filter & Power Cord    Includes Brackets and UC-IR24 Remote    Gear Bag for Two LED Strip Fixtures    Two 3-Pin DMX Cables

Related Questions and Answers

Q: 1. Can I put the original Lusmandy bar on the top side and attach it to the mount while using this bar instead for accessories?

A: You could but you may need to drill additional holes in the OTA

Q: 2. What is the thread size on the middle mounting hole?

A: The thread size of the middle mounting hole is 3/8 . However, this unit comes with a 5/8 adapter that fits in the middle mounting hole. This adapter can then be screwed on the end of any standard 5/8 microphone, just like you would do with a mic holder.

Q: 3. What gold mount batteries can power this light?

A: This light accepts V mount batteries with the V mount plate that is included. A good option in a battery is the Core SWX SWXPL90SK1 Power Kit 1 B&H # COXPL90SK1. An image for it is shown below.

Q: 4. I would like to know how much light loss these lights have at 3000k and 6000k when they are set to full output? My current led light takes a big hit in power output at the lower and higher kelvin settings, it's brightest is in the middle around 4200k.

A: at 3000K they are not that good but thy get to ther best around 5600K so it is very good for that

Q: 5. Hi, Can this be installed on the top side of the 11" OTA (rather than replacing the button Lusmandy bar)?

A: It can but you would have to drill additional holes in the OTA

Q: 6. What's the right V-mount battery for these lights (in terms of voltage and wattage) ?

A: You need at least a 165WH battery in order to use it at full power.

Q: 7. Is this ip67 rated?

A: The Littlite ANSER LED Desk Light with 24" Gooseneck (North American Plug) is intended for indoor use therefore does not have an IP rating.

Q: 8. Does ir fit in the Celestron 8 XLT? The gap between the holes in the scope is around 4.8 mm, which is wider than the dovetail, 4.3 mm, I think

A: The only information Celestron has provided is Optical Tube Compatibility: Current Celestron 8" Schmidt-Cassegrain and 8" EdgeHD optical tubes with the wide CGE bar

Q: 9. What are the center to center dimensions of the middle mounting screws? I'd like to use this to replace the CG-3 Dovetail bar on my AstroMaster 130EQ as a means to balancing the scope rather than having to undo the tube straps.

A: Celestron does not publish the information on the Celestron Narrow Dovetail Bar Kit for 8" Cassegrain OTAs BH #CEDBKN8 • MFR #94501 other than it is specific for the 8" SCT & EdgeHD OTAs

Q: 10. If I just need to adjust light intensity, how many DMX 512 internally compatible lights (not needing the DMX adapters) can I control with this controller?

A: No. The following system will only run off a Controller/Transmitter wireless system.