Give your FPV racing drone a robust control system by adding the EMAX Aeris Link ExpressLRS Transmitter Module 915MHz Nanofrom EMAX Aeris Link ExpressLRS Transmitter Module 915MHz Nanoto your compatible controller. The module supports USB-C or JR connection and transmits control signals using open-source ELRS technology. This module also supports CRSF (Crossfire Serial Data Protocol) and OpenTX control signals to maximize compatibility for a seamless integration with your existing setup. This nano-sized module operates on the 915 MHz frequency. For added convenience, the module features a 1.29" built-in OLED display for showing essential flight control data, to let you fine-tune settings, and provide overall help in controlling your craft in real-time.

For FPV Racing Drones    Transmitter for Existing Controller    Nano Size with 915 MHz Frequency    Uses Open-Source ELRS Technology    USB-C or JR Connection    Supports CRSF & OpenTX Signals    1.29" Built-In OLED Data Display    10 to 1000mW Transmission Power    XT30 for Optional External Power    Supports 5 to 21V of XT30 Power Input

Choose your transmission output power from 10 to 1000mW to optimize range and stability, and if needed, you can use the XT30 interface for optional external power. The Aeris Link supports 5 to 21V of power, with a recommended 2S, 8.4V.

Related Questions and Answers

Q: 1. Will this work on a Godox V860iii speedlite?

A: As of the time of this writing (November 2023), the Sekonic RT-GX Godox Transmitter Module (B&H# SERTGX) is only designed to work in the Sekonic Speedmaster L-858D-U Light Meter (B&H# SEL858DU). The module serves as an interface between the aforementioned light meter and Godox flashes and strobes using the Godox X radio system such as the Godox Ving V860III TTL Li-Ion Flash Kit for Sony Cameras (B&H# GOV860IIIS).

Q: 2. Can I use this in a hotel room which accesses a hotel wifi? I stay in some hotels which use a log in and password.

A: Yes, this would not be a problem. This model Supports the following modes ,Router, Repeater, Client, AP, and WISP operation modes.

Q: 3. Does this unit provide connection to Broncolor Grafit & Verso power packs equipped with original RFS system?

A: I contacted Sekonic concerning your inquiry. According to Sekonic, the original RFS receiver found in the older packs such as the older Broncolor Grafit A4 RFS Power Pack and the Broncolor Verso A2 RFS Power Pack work on 900 Hz radio frequency. The new transmitters/receivers which are found in the newer kits work on RFS 2/2.1/2.2, which use the 2.4 GHz radio frequency. As such, the newer radios cannot directly communicate with the older wireless radio system, and the Sekonic RT-BR Broncolor Transmitter Module would not talk to the power packs you own. As a work-around, you may purchase a Broncolor RFS 2 Receiver, B&H # BRRFS2R, and connect it to the sync terminal on your older power packs. While you will not have power control capability, you will be able to trigger the older power packs from a Sekonic meter with the installed RT-BR Broncolor transmitter module.

Q: 4. will this work on the L-358 Meter?

A: Yes.

Q: 5. Is this version 2?

A: Yes, this would be the v2 model.

Q: 6. can you hook it up to an external monitor and stream it to a phone at the same time?

A: No, the Accsoon CineView Nano Wireless Video Transmitter does not connect to an external monitor, it connects to a phone, as well as tablets and phones running the iOS/Android App.

Q: 7. Before I buy this, I need to know if this will work with the Sekonic L-358? I see someone said yes, but when I did a search online everything I'm seeing it only works with the L858D-U.

A: No, The following unit is designed and made for the speedmaster L-858D-U Light Meter. Not the L-358.

Q: 8. Is multi camera monitoring possible?

A: Yes, the Accsoon CineView Nano Wireless Video Transmitter can connect up to four iOS or Android devices simultaneously.

Q: 9. Is it possible to use multiple cineview nano units for wirless multi cam setup for streaming? If yes what apps/devices are compatible

A: Yes, the Accsoon CineView Nano Wireless Video Transmitter would need to transmit to multiple receivers all of which would need to be connected to a multi-cam switcher.

Q: 10. Can you lock the iPhone’s screen to be in the pocket and continue to record?

A: No, when using the Accsoon CineView Nano Wireless Video Transmitter to transmit to a smart device for recording via the smart device, should the smart device be locked or closed the recording will stop.