Fun to be handheld, the Ulanzi VL119 RGB LED Light Wand 1.6'from Ulanzi VL119 RGB LED Light Wand 1.6'allows you to select between a wide range of RGB colors, as well as 2500-9000K CCT, so you can use it in any creative lighting situation. The 1.6' long fixture features 360° of adjustment in RGB mode for color effects, and it also packs 20 different lighting effects. A built-in OLED display screen shows you important information such as lighting modes, intensity, and remaining battery power.

For Content Creators and Vloggers    Output: 105 Lux at 3.3'    2500-9000K CCT; RGB Mode    Onboard Control    CRI 95    20 Preset Effects    Built-In USB-Rechargeable Battery    Up to 70-Minute Runtime    1/4"-20 Mounting    Includes USB-A to USB-C Cable

114 LEDs (38 RGB) provide up to 105 lux at 3.3'.

CRI of 95 for highly accurate color rendering.

Select from 20 effects, such as cop car, ambulance, fire, lightning, fireworks, TV, candle, party, fault bulb, pulsing, strobe, RGB strobe, paparazzi, emergency, H/L beam,

red flash, blue flash, green flash, HSI slow, and HSI fast.

An integrated 2600mAh lithium battery lets you run the light for 70 minutes at full power or for longer periods of time depending on the intensity level. The battery charges via USB-C in about two hours using the included cable.

The light's integrated 1/4"-20 mounting hole is fully compatible with a variety of optional supports.

Related Questions and Answers

Q: 1. Would it run off a 12V power cord (attached to a car battery) for field work?

A: We believe that should work if you have the proper adapter, however we are not aware of any specific tests between the two.

Q: 2. Can I power this using V-mount batteries via D-tap to DC cable?

A: You would need to use an adapter to allow you to use a V mount battery with something like the Kondor Blue D-Tap To Sony a7S III Dummy Battery NP-FZ100 Cable BH #KODTSA7SDB

Q: 3. Does the 5500k have twice as many daylight less since there is no tungsten LEDs?

A: Ive set mine at 5500k at 30% output and still pretty bright. You can set the color temperature if your looking for similar tungsten color output. Hope this helps.

Q: 4. can this be mounted on a light stand?

A: The Yongnuo YN360 II LED Light Wand has a -20 tripod thread on the bottom of the unit. The Impact Swivel Umbrella Adapter, B&H # IMCA108, would be recommended as an adapter to connect the Yongnuo YN360 II LED Light Wand to the 5/8 baby stud on the top of a standard light stand.

Q: 5. Can you mount these lights using T12 clips such as #KILHC24 or #NAHDT121C?

A: The diameter of the GVM light is 2" a T12 has a diameter 1 1/2"

Q: 6. How soft and diffused is the light? Would it work ok for portraits at dusk?

A: The light is a medium soft but gets a little softer as it gets closer to the subject. The wand has a diffused, translucent cover but can also be diffused even more with a diffused material if you are looking for a very soft look. It should look nice for a disk portrait with the blue LED bulbs reduced a bit.

Q: 7. Is this item actually only capable of 5500 Kelvin temperatures? The photos pictured here are like the 360II unit that I already have - which does both 3200K and 5500K.

A: This model can either give you a 5600 Kelvin Color or an RGB mode.

Q: 8. Is the light output adjustable, say if I wanted to have the brightness only at 10% or 80%? Or is it fixed at low, medium, high, or just one level?

A: Yes, the Yongnuo YN360 II LED Light Wand (5500K), B&H # YOYN360IIW, does offer dimming. While Yongnuo does not list the dimming percentage, they do state that the fixture has an encoder digital dimming mode with coarse and fine adjusting mode, and can be dimmed accurately and reliably.

Q: 9. How this light get connected to the app? Bluteooth? Wifi?

A: The app uses Bluetooth.

Q: 10. How's the color accuracy. The original light wand was slightly magenta

A: Id say it is as close to perfect as youd expect at this price point but it is much less magenta than the last model...