Seagate 8Tb Ironwolf Pro Nas Hdd 7200 Rpm Sata Iii

Seagate 8tb Ironwolf Pro Nas Hdd 7200 Rpm Sata Iii

Product Code: eq159202
Availability: In Stock

$1,199.94 $1,787.91

Qty

8 reviews Write a review

Description
Reviews (8)

Designed to deliver performance, reliability, and dependability in multi-bay, multi-user RAID and NAS environments within commercial and enterprise settings, the Seagate 8TB IronWolf Pro NAS HDD 7200 RPM SATA IIIfrom Seagate 8TB IronWolf Pro NAS HDD 7200 RPM SATA IIIis built to withstand 24/7 operation, or 8760 hours per year. This 8TB drive has been equipped with a SATA III 6 Gb/s interface, a rotational speed of 7200 rpm, a 3.5" form factor, and a 256MB cache, providing users with ample storage capacity with data transfer speeds of up to 255 MB/s. The IronWolf Pro also has an MTBF rating of 2 million hours and a workload rate of up to 550TB per year. Seagate's AgileArray technology provides dual-plane balancing, time-limited error recovery (TLER), and rotational vibration (RV) sensors to deliver enhanced RAID performance. Included is a limited 3-year Data Recovery Service that helps you retrieve damaged data in the event of a mechanical error, accident, or natural disaster, and overall protection is provided by a limited 5-year warranty.

8TB Storage Capacity per Drive 3.5" Form Factor SATA III 6 Gb/s Interface 256MB Cache 7200 rpm Up to 255 MB/s Data Transfer Rate 2 Million Hours MTBF Workload Rate: 550TB per Year AgileArray Technology Seagate Rescue Data Recovery

Key Specs
Total Installed Storage	8 TB
Drive Type	SATA III / 3.5" HDD (7200 rpm)
Read Speed	Maximum: 255 MB/s
Write Speed	Maximum: 255 MB/s
Parameters
Drive Type	SATA III / 3.5" HDD (7200 rpm)
Read Speed	Maximum: 255 MB/s
Write Speed	Maximum: 255 MB/s
Encryption Support	No
Mean Time Between Failures (MTBF)	2.0 Million Hours
Endurance (Total Bytes Written)	550 TB
Power Draw	10.1 W (Active) 7.8 W (Idle) 1.0 W (Standby)
Input Power	12 VDC at 2 A
General
Operating Conditions	32 to 97°F / 0 to 65°C
Operating Shock	70 G / 2.0 ms
Storage Conditions	-40 to 158°F / -40 to 70°C
Dimensions	5.79 x 4.01 x 1.03" / 146.99 x 101.85 x 26.11 mm
Weight	1.6 lb / 720 g
Packaging Info
Package Weight	1.88 lb
Box Dimensions (LxWxH)	9.2 x 7.1 x 3"

All-CMR (conventional magnetic recording) portfolio enables consistent, 24/7 performance, allowing users to access data virtually anytime, anywhere.

Up to a 550TB per year workload rating, a 2 million hours MTBF, and a limited 5-year warranty for a solid total cost of ownership (TCO).

Seagate provides complimentary Rescue Data Recovery Services for three years, giving users a hassle-free, zero-cost data recovery experience.

Helps protect data with prevention, intervention, and recovery recommendations to ensure peak system health.

Seagate's AgileArray technology provides dual-plane balancing, time-limited error recovery (TLER), and rotational vibration (RV) sensors to deliver top RAID performance in multi-bay environments.

Related Questions and Answers

Q: 1. What is the difference between the "Retail" and the "OEM" drives?

A: The OEM models ship in a plain brown box, as opposed to the retail package which has graphics/text, etc. There are no technical differences in the actual product.

Q: 2. Can I use the two of these 18TB drives in the DS1019+?

A: The Seagate 18TB IronWolf Pro 7200 rpm SATA III Internal NAS HDD is not showing as a compatible drive on the Synology compatibility chart at this time.

Q: 3. Can I check if this HDD has local warranty in Singapore?

A: You will need to check with the manufacturer to see what their repair capabilities are in your part of the world for the Seagate 22TB IronWolf Pro 7200 rpm SATA III 3.5" Internal NAS HDD (CMR, Retail, 4-Pack) BH #SE22000NT04K.

Q: 4. Will this work with a Drobo 5D3?

A: Yes, this Seagate 14TB IronWolf Pro 7200 rpm SATA III 3.5" Internal NAS HDD (CMR, 2-Pack), would work with a Drobo 5D3.

Q: 5. Is this a 512e drive or 4Kn?

A: The Seagate 12TB IronWolf Pro 7200 rpm SATA III 3.5" Internal NAS HDD is a 512e drive.

Q: 6. Will this drive work with a SABRENT USB 3.0 SATA I/II/III bay?

A: You can use this Ironwolf drive in a Sabrent 3.5" enclosure BH #SAECKSL3.

Q: 7. I intend to hook up 4 of these as part of a RAID 0 array to boost performance speeds while doing photo editing and graphics intensive work. Is this ideal for RAID 0, or are they better options out there? WD Black or Seagate Barracuda Pro perhaps?

A: These will work well.

Q: 8. Can these be used as single drives? Planning on using an enclosure for 1 drive for field video editing. Are they tough for constant traveling?

A: This drive can be used as a stand alone drive.

Q: 9. Hey there, is this compatible with OWC Drive Dock? https://www.bhphotovideo.com/c/product/1288284-REG/owc_other_world_computing_

A: While the Seagate 16TB IronWolf Pro 7200 rpm SATA III 3.5" Internal NAS HDD (CMR, OEM) could be mounted in the OWC Drive Dock, it is a NAS drive intended to be used in a NAS, so it is not meant to be used as direct attached storage, and is not a HDD we would recommend. I'd recommend using the Seagate 16TB Exos X16 7200 rpm SATA III 3.5" Internal HDD instead. See: https://bhpho.to/2OW26Uj

Q: 10. Is this 18Tb IronWolf Pro ST18000NE000 compatible with Synology DS420+ ? Thanks!

A: The Seagate 18TB IronWolf Pro 7200 rpm SATA III Internal NAS HDD is currently not listed as a compatible drive on the Synology compatibility list.

Anthony	16/09/2024
[9.2 x 7.1 x 3"] Great product and service. Always get great service when purchasing and no issues with products. 5

John	02/08/2024
[1.88 lb] I purchased 5 of these for use in in a Synology 1522. As others have warned, you get a warning message but after accepting, the Synology shows these as healthy and has no issues using them. Write performance in a RAID 6 has no trouble maxing a 1GbE connection. I’m sure 2.5 would be no issue. Internal read/write speeds during the array build were 1.3GB/s so each drive was yielding about 250MB/s. I did have one arrive DOA. B&H exchange for a replacement was painless. Once the replacement arrived, no issues. Other reviews have commented on noise. These are quiet as compared to the 6 - 16TB Exos drives in my 1621. I’m sure in a dead silent room these have mechanical noise but this shouldn’t be noticeable if placed in a closet or out of the way. Overall, I’m very happy with the 24TB Ironwolf’s and would purchase again. 5

Jason	08/07/2024
[1.88 lb] I have been using IronWolf Pro drives in a couple NAS devices for over 5 years and they've been very reliable. These are new, but two sets of smaller capacity drives were rock solid. 5

Arun Kumar	01/06/2024
[550 TB] You won't go wrong with Seagate Wolf Pro as a best companion for your NAS 5

Arun Kumar	17/05/2024
[9.2 x 7.1 x 3"] I read several reviews and evaluated different products, you won't go wrong with Seagate Wolf Pro as a companion for your NAS!! 5

Michael	13/05/2024
[9.2 x 7.1 x 3"] These drives work great in my Synology 6 Bay Nas - 5

Brett	01/05/2024
[8 TB] These drives are fantastic for a NAS unit and B&H delivers a great product on time. 5

Ryan	17/04/2024
[8 TB] This is a great hard drive for server use or file backups, which is using this for both. If I need to expand my storage needs these are the first I'd consider getting again. 5