The 7" IRONMAN Cine Magic Articulating Arm Quick Release Mount 7"from IRONMAN Cine Magic Articulating Arm Quick Release Mount 7"makes integrating fill lights or secondary monitors into your camera rig setup a breeze thanks to its dual ball heads. The arm features quick release mounts for easy transitioning between accessories. The mounts feature a 1/4"-20 screw with ARRI anti-twist pin and retractable 3/8"-16 screw adapter. The arm also includes a cold shoe with 1/4"-20 thread for even more mounting flexibility. It supports loads up to 13.2 lb, accommodating most accessories, and it is constructed of stainless steel for a durable design.

7" Articulating Arm    Ball Head with Quick Release Mount    ARRI Anti-Twist Pins    1/4"-20 Screw with 3/8"-16 Adapter    Cold Shoe with 1/4"-20 Thread    13.2 lb Load Capacity    Stainless Steel Construction

Related Questions and Answers

Q: 1. Will this REALLY hold 6.6 lbs. if it is extended all the way out horizontally 20" with the weight at the end?

A: Yes the load capacity would be based on the full extension of the arm, so it is capable of holding up to 6.6 lbs.

Q: 2. Which plate/quick release is this? ManfrottoPL compatible?

A: Included with the Manfrotto 244RC Variable Friction Magic Arm with Quick Release Camera Bracket (B&H# MA244RC) is the Manfrotto 200PL Quick Release Plate. In case it's of interest, the following is a kit that contains, among other things, the Manfrotto 200PL Quick Release Plate, and more information can be found at its product page: https://bhpho.to/3tELKjy

Q: 3. What's the max payload this can hold? Want to mount a C300 MKII with Canon 24 -70mm

A: Since the Manfrotto 143N Magic Arm can hold up to 6.6 lbs, the Super Clamp holds 33 lbs and the BackLight Base can also hold up to 33 lbs, the Canon C300 Mark II and Canon EF 24-70mm f/2.8 II USM can definitely be held securely with this kit.

Q: 4. Can this model be attached to the Easy Link on the Manfrotto MT055XPRO3 ?

A: The Manfrotto 3/8" + 3/8" Adapter Spigot, B&H # MA125 can allow this arm to connect to the Easy-Link on select Manfrotto tripods. https://bhpho.to/2QlhTJZ

Q: 5. Will it work on Odyssey 7Q+ and Sony FS700? Or should I use another Magic Arm? Thanks.

A: Being that the Convergent Design Odyssey7Q+ and the Sony NEX-FS700R Super 35 Camcorder both have a threading that is compatible with the Manfrotto 143BKT bracket in this kit, you can use the 143N Magic Arm with them. This would be especially good to use if you are attaching the Odyssey 7Q + to the leg of your tripod with the Super Clamp or the camera to a flat or rounded surface with the same clamp.

Q: 6. How do you attach the magic arm to the Manfrotto tripod?

A: Depending on how much weight you need to hold, each stud has a tap. One is 3/8 and the other is 1/4 -20. All tripods have either a 3/8' orr 1/4 screw.

Q: 7. Manfrotto 143 vs 244? Pros/Cons of each?

A: Nothing its the same magic are the only difference is that the 143 comes with accessories that are very much needed in order to complete a kit.

Q: 8. I can adjust the locking handle with two allen wrenches, but how do I adjust the tension at the ball joints at the ends?

A: The ball joint tension can't be adjusted. I would recommend not placing anything over 6.61 lbs. Which is the rated payload.

Q: 9. Weight capacity. How heavy of a camera is this arm rated to hold?

A: Not sure what the official specs are but we support a Thermography camera and motorized pan/tilt mechanism from it. The combination weighs about 5 pounds. The closer the arm is to the wall the stronger it will be, and of course the more horizontal extension used it won't support as much. The lock knob can be cranked down pretty tight, and the arm and wall plate are very solid (typical for Manfrotto).

Q: 10. Just out or curiosity. Are the company name and serial number printed on the arm or is it a sticker?

A: The name is painted on.