Ndi|Hx 30X Ptz Cameras And V2 Ip Controller Bundle

Ndi|hx 30x Ptz Cameras And V2 Ip Controller Bundle

Product Code: eq159420
Availability: In Stock

$9,897.00 $12,965.07

Qty

16 reviews Write a review

Description
Reviews (16)

Add a versatile NDI|HX PTZ camera to your meeting room, house of worship, or studio with this white NDI|HX 30x PTZ Cameras and V2 IP Controller Bundlefrom ikan. Boasting a 1/2.8" CMOS sensor, the OTTICA is fully licensed for NewTek's NDI|HX communication, which enables the utilization of NDI protocols with less bandwidth than NDI.

A 4.3 to 129mm lens provides a 30x optical zoom with a viewing angle ranging from 2.34 to 65.1°. With a color temperature range from 2400 to 7100K, the OTTICA captures vibrant, razor-sharp images that are supported by its 2D/3D noise-reduction capability. Video output occurs via HDMI, SDI, and RJ45 NDI connectivity, employing resolutions up to 1080p60. A 3.5mm audio input makes it possible for you to embed analog audio with the video outputs, and you can power the camera using the included power adapter or via PoE (Power over Ethernet) over the RJ45 port.

Employing a virtually silent motor during pan, tilt, and zoom operation, the OTTICA supports RS-232 and RS-485 serial connectivity, which when used with a separately available controller, allows you to store up to 255 presets or up to 10 presets when using the included IR remote control. Also in the box, are a cascade cable for daisy-chaining RS-232 serial control, an RS-232 cable, an RS-485 connector, a power adapter, and a wall-mount bracket.

3 x OTTICA NDI|HX 1080p PTZ Cameras OTTICA V2 IP PTZ Camera Controller 30x Optical Zoom, HDMI/SDI Output Fully Licensed NDI|HX IP, VISCA, and Pelco-D/P Control

Key Specs
Image Sensor	1/2.8"-Type CMOS
Sensor Resolution	Effective: 2.07 Megapixel (1920 x 1080)
Optical Zoom Ratio	30x
Max Digital Zoom	10x
External Recording Modes	SDI/BNC / HDMI / RJ45 1920 x 1080p at 25/29.97/30.00/50/59.94/60.00 fps 1920 x 1080i at 50/59.94/60.00 fps 1280 x 720 at 25/29.97/30.00/50/59.94/60.00 fps
Broadcast Output	NTSC/PAL
IP Streaming	H.264, H.265, NDI, NDI\|HX, ONVIF, RTMP, RTSP 1920 x 1080
Supported Control Protocols	NDI Pelco-D Pelco-P RS-232 RS-485 VISCA
PoE Support	PoE 802.3af
Mounting	1x 1/4"-20 Female for Bracket
Imaging
Image Sensor	1/2.8"-Type CMOS
Horizontal Resolution (TV Lines)	1080 TV Lines
Sensor Resolution	Effective: 2.07 Megapixel (1920 x 1080)
Built-In ND Filter	No
Focus Control	Autofocus Manual Focus
Exposure Control
Signal-to-Noise Ratio	55 dB
Minimum Illumination	0.5 Lux at 1/8 Shutter Speed
Flip / Mirror Support	Image Flip, Mirror (Vertical)
White Balance	Range: 2400 to 7100K
Lens
Focal Length	4.3 to 129mm
Optical Zoom Ratio	30x
Max Digital Zoom	10x
Field of View	65.1 to 2.34°
Maximum Aperture	f/1.6 to 4.7
Video Capture
External Recording Modes	SDI/BNC / HDMI / RJ45 1920 x 1080p at 25/29.97/30.00/50/59.94/60.00 fps 1920 x 1080i at 50/59.94/60.00 fps 1280 x 720 at 25/29.97/30.00/50/59.94/60.00 fps
Embedded Audio	HDMI/NDI
Broadcast Output	NTSC/PAL
IP Streaming	H.264, H.265, NDI, NDI\|HX, ONVIF, RTMP, RTSP 1920 x 1080
Control
Presets	255 via RS-232 10 via IR
Move Speed	Pan: 0.1 to 180°/sec Tilt: 0.1 to 80°/sec
Movement Range	Pan: 170° Tilt: -30 to 90°
Supported Control Protocols	NDI Pelco-D Pelco-P RS-232 RS-485 VISCA
Interface
Video I/O	1x BNC (3G-SDI) Output 1x HDMI (Unspecified Signal) Output 1x RJ45 (NDI) Input/Output
Audio I/O	1x 1/8" / 3.5 mm TRS Stereo Line Input
Other I/O	1x DIN 8-Pin (RS-232) Input/Output 1x Block 2-Pin (RS-485) Input
Power
PoE Support	PoE 802.3af
Power I/O	1x Barrel (12VDC at 1.5 A) Input
Power Consumption	Power Supply: 110 to 220 VAC 12 W
General
Mounting	1x 1/4"-20 Female for Bracket
Operating Conditions	14 to 122°F / -10 to 50°C at 20 to 80% Humidity
Storage Conditions	14 to 140°F / -10 to 60°C at 20 to 95% Humidity
Dimensions (W x H x D)	5.9 x 5.9 x 6.6" / 150 x 150 x 167.5 mm
Weight	3.08 lb / 1.40 kg (Body Only)
Packaging Info
Package Weight	6.375 lb
Box Dimensions (LxWxH)	10.5 x 10.5 x 9.2"

1/2.8" CMOS sensor captures up to 1080p60 video

HDMI, SDI, RJ45 Ethernet (NDI) video outputs

Fully licensed NDI|HX support

PoE (Power-over-Ethernet) support

Silent PTZ motor mechanism

4.3 to 129mm varifocal lens with 30x zoom and a 2.34 to 65.1° field of view

2D/3D noise reduction

Control PTZ using included IR remote control and PELCO-D, PELCO-P, and VISCA serial protocols

Powers with power adapter or via PoE

One 1/4"-20 mounting thread, wall mount bracket included

Cascade connector included to support serial control of multiple cameras from one controller

Related Questions and Answers

Q: 1. Will this work with a Panasonic AW-HE120K?

A: Yes, the PTZOptics SuperJoy NDI|HX/IP & Serial PTZ Camera Joystick Controller does support the RS-422 Protocol required by the Panasonic AW-HE120K HD PTZ Camera.

Q: 2. Is this compatible with Sony SRG-X120 1080p PTZ Camera with HDMI, IP & 3G-SDI Output?

A: Yes it would be.

Q: 3. How many preset memory positions can be saved?

A: The following unit offers 9x Quick, 4 Super, 255 Total Presets.

Q: 4. Will this work with Blackmagic Design ATEM Television Studio Pro 4K Live Production Switcher? Can I control the camera using this switcher?

A: Yes, this has an SDI output which you can use to connect it to that switcher. However you will not be able to control the camera from the switcher.

Q: 5. Can this control the Canon CR-N300?

A: Both products are listed as having VISCA compatibility, however, the Canon camera is listed explicitly as having compatibility with the Canon branded RC-IP100.

Q: 6. Will this camera work well where subject is 35' away?

A: Yes, 20x optical zoom will be more than enough to cover that distance.

Q: 7. Will I be able to get a good close-up shot on a subject 80 feet away with this camera?

A: from that distance you can get a medium shot (half the body) it can not get close enough for a close up (head and shoulders)

Q: 8. Do you have to have strong internet to use to connect cameras?

A: The connection between the remote and the cameras is a local network connection. Internet is not required for control.

Q: 9. This camera have a built in microphone audio?

A: works well who is this?

Q: 10. Hi, this works for the OBSBOT Tail AIR?

A: Yes, the PTZCam View NDI PTZ Controller with NDI|HX Preview and Joystick Control works with the OBSBOT Tail AIR.

Colin	12/09/2024
[PoE 802.3af] This controller has been incredibly easy to configure and use. While some functions required the manual to figure out, others are so intuitive that I was able to figure them out via trial and error on the first try. This is a solid addition to our livestream ecosystem. 5

Dave	08/09/2024
[PoE 802.3af] We use this in a church sanctuary to control three PTZ cameras. Previously, we had PTZ's IP SuperController, which was frankly, a pretty bad experience. We took a chance one this newer iteration and we love it. Solidly built, responds well, controls what we need and most importantly has not once had to reboot itself at the slightest static shock. 5

Robert	28/08/2024
[f/1.6 to 4.7] Our church bought this controller to operate a PTZOptics 20x-SDI Gen2 and it has been great, easy setup and easy to use. 5

Joseph	17/08/2024
[65.1 to 2.34°] Open box. Plug in. Send invoice. It's that simple. Also supports more complex, more precise managed network environments. Compared to units costing half, has saved me about $1K worth of aggravation. No regerts. 5

Maciej	01/08/2024
[6.375 lb] The camera is excellent. It combines modernity with the high level of previous PTZ cameras. I use Sony H900 for work and recently also three Sony SRG X120 - all work very well. 5

Gennady	11/07/2024
[30x] I use 4 these cameras in my tv production studio. The image is very good. I also have Sony FX 9 and in multi cam production there is not much different in quality.. Obviously, like with any other professional camera, you will still need to do some adjustments before the show gets out. Generally, I really like the camera for this price. 5

Jason	01/07/2024
[65.1 to 2.34°] I was worried that it would be difficult to configure, but one single ethernet cable connected to a POE injector and they have power and provide a pristine image to Vimeo's Livestream Studio. It took seconds to go from no signal to live streaming. And learning to set presents and recall presents is as easy as 1, 2, 3. Literally. Push preset, Push a number, and then Push enter. These are well worth the investment. 5

Edward	16/06/2024
[PoE 802.3af] I use this controller for up to three PTZ 30x cameras, via PoE Ethernet. Nearly every feature of the camera is accessible through this controller. Besides pan, tilt and zoom, I regularly use manual exposure control, and up to 10 preset positions for each camera. A particularly nice feature is the ability to attach an HDMI monitor to view the currently selected camera via Ethernet RTSP. You set the speed one notch below that of your HDMI or SDI video. This is an essential feature when working with software (e.g., WireCast) or hardware (e.g., SlingStudio) which has a significant lag time. The monitor lag is only a few frames, which is easy to accommodate. I ultimately bought two Superjoy controllers, because I rely on it for nearly every job. 5

Adam	14/06/2024
[1080 TV Lines] Reliable and high quality. 5

Jerry D.	11/06/2024
[30x] The camera is doing a great job with live-streaming our church service. We did have to down scale it for our provider but in time technology will improve in their end. The camera does not have any image stabilization so if you are zoomed in over a long range someone walking by will create a slight tremble in the image if you don’t have it mounted on something to absorb the shock. We are covering a distance of about 65 feet and it produces a great image for us. 5