Place the DM48 within arm's reach with the Midas DP48MB, a mounting bracket that allows the mixer to be attached to standard mic, music, drum hardware, or anything else you can imagine. The DP48MB offers dual headphone hangers and an integrated cable guide to keep everything needed at the ready.

Attaches to Standard Mic or Music Stand    Attaches to Drum Hardware

Related Questions and Answers

Q: 1. What are the measurements??

A: The SKB 1RMM32-DHW is designed specifically for the Midas M32. SKB offers the Exterior dimensions only. Length: 44.25 in (112.40 cm) Width: 35.75 in (90.81 cm) Depth: 14.75 in (37.47 cm)

Q: 2. mr18 have deesser plugginn

A: thank you for your question. This unit does not have a primary deesser effect available but you can achieve a similar effect but a combination of EQ and compression.

Q: 3. The unit weight is 11 pounds, but the package weighs 1.1 pounds. How is this possible? some mistake?????

A: This item weighs 1.1 lbs. I emailed the B&H webmaster to fix that.

Q: 4. Hi can I use this device with my Nikon D5200 to record sound directly from mixer with RCA cable from mixer side and in other is AUX and plug in to this device the gave output to my camera

A: The Kopul CMX-1 is not made for taking a line signal from a mixer. It is made for use with microphones that have a 3.5mm connector. If you want to take a line out from a mixer directly into your camera, you want to look at an adapter that can take line input, like the Kopul CMX-2 instead (B&H # KOCMX2V2). https://www.bhphotovideo.com/c/product/1332706-REG/kopul_cmx_2_v2_two_channel_passive_camcorder.html

Q: 5. Can the 2 AES50 connections be on different sample rates? I.E. can it be used with a PRO-X console for FOH and an M32 console for monitor?

A: To use this device with both consoles, you would need to use this network bridge to make the sample rate changes, BH #KLDN9650.

Q: 6. Will this mount on a C300 Mark III Expansion Unit?

A: Yes, I believe it will mount on the EU-V2 expansion unit.

Q: 7. This Mixer, have a 48 Phanton volt?

A: Yes, this will provide phantom power (48volts)

Q: 8. I hear a loud buzzing noise in my Sony lavalier mics with this mixer. The mics are on two different frequencies. Not sure why this is happening? Please help!

A: It would be helpful to know whether you are using two wireless systems and connecting the output from each receiver to the mixer or if you are trying to connect each lavalier microphone directly to the inputs on the mixer. The mics will not work without mic preamps and plug-in power which this mixer does not provide. Please contact us directly either through live chat on the website or by phone at 800-606-6969 or 212-444-6615 so we can help you to troubleshoot.

Q: 9. What happens to the signal on left and right inputs, if I plug in stereo microphones? Are they automatically converted to mono is just one channel used from each microphone? I only have stereo microphones.

A: You would only be able to plug in one stereo mic to this unit, utilizing the center input marked stereo. If you have two mono microphones that terminate with a 3.5mm stereo mini connector, you would connect one into the left and another into the right input.

Q: 10. So if I'm running a Pro2 at FOH and another Pro2 in MON, I'd need to buy 2 of these to get discrete attenuator control (master/master preamp control) for each console?

A: The DL431 features 3 sets of outputs. The two variable gain preamps are remote controllable from two separate locations, such as front of house and monitor positions. ( rear panel). The front panel is a transformer-isolated split and fixed gain.