Use this Dolly Wheel Slider for V360SE & V360 - DigitalFoto Solutionfrom Dolly Wheel Slider for V360SE & V360 - DigitalFoto Solutionto create a slider shooting effect with your V360 or V360SE spinning rig. The slider features four wheel bearings that are spaced to be compatible with standard 15mm dual rods. A 9.8" center rod mounting hole provides a place to secure your gimbal center pole using the tightening screw.

Four Wheel Bearings    9.8" Rod Mounting Hole    Tightening Screw    Compatible with Dual 15mm Rods

Related Questions and Answers

Q: 1. Will the DJI Osmo Mobile 4 fit in this bag?

A: At this time we are recommending the PGYTECH Carry Bag for Handheld Gimbal instead, BH #PGPOS018. https://bhpho.to/2T4CnbJ

Q: 2. What is the length of the exposed bolt after the swivel bearings and hold down nut are installed?

A: When the Glide Gear Dolly Track Swivel Wheel Assembly is fully assembled, The bolt and swivel bearings are no longer visible.

Q: 3. Is the screw size 1/4inch or 3/8inch?

A: According to the manufacture the Glide Gear Dolly Track Swivel Wheel Assembly uses a 3/8"-16 screw.

Q: 4. Does these wheels work with Matthews C-Stand ? 339567

A: Matthew C-stand legs are 27mm thick. unfortunately DigitalFoto Solution Limited 360° Rotatable Locking Caster Wheel for 25mm Leg & C-Stand would not fit Matthew's C-tand base.

Q: 5. Is the angle of the caster to the leg adjustable?

A: The angle of the wheels on the DigitalFoto Solution Limited M11-036B Combo Stand Locking Wheel Set (B&H # DIM11036B) is not adjustable.

Q: 6. How many wheel are there in the order? Do I need to order 3 of this to get 3 wheels? or does 1 order come with 3 wheel sets?

A: Hi Minze,The wheel assembly consists of one baseplate, one allen socket bolt with bearings and a locknut for it to swivel on, and four wheels.If you go to the Glide Gear website, they show you in more detail how the Dolly Track Wheel Assembly works.Mine work very well and I'm very happy I bought them.

Q: 7. What size track work best with these wheels? Does PVC track work well with these wheels?

A: These wheels are meant to be used on the movie industry standard size for dolly track pipe which is 1 1/2 . I imagine they will be fine on pipe anywhere from 1 to 1 3/4 . They should work fine on PVC as well as stainless or chrome dolly track.

Q: 8. Will this fit the Manfrotto 114mvb tripod? I do not see a through-hole on the flat bar for the wheel bolt. I can replace the bolt with the correct pitch and thread if needed. I need to know if this item is compatible with my tripod.

A: It should work. It comes with a 12mm bolt that you can remove.I have the Kessler K-pod tripod which has 3/8 and 1/2-inch tapped. So I just replaced the 12mm with a 3/8 and it works fine. The bolt feeds through the bottom of the triangular plate and is easily tightened with a deep socket wrench. It's a great buy and I'm buying more to make a large dolly platform with. You won't be disappointed!

Q: 9. What kind of wrench can I take off the stock wheels and put these on? A regular wrench is too thick.

A: Echoing the previous response, it looks like a small channel lock or pliers would get the job done.

Q: 10. IS this safe for a doorway dolly that would hold an operator too?

A: I would think so. You basically have 16 skateboard wheels underneath fitted to sturdy metal triangular frames, so that should be okay. It will depend more on your dolly surface. One more thing: the bolts are metric unfortunately (M-10); the Allen head bolt requires a 9-mm Allen wrench that are very hard to find. I replaced mine with 3/8th-16 bolts, the little bearings work fine with them!