Connect up to 5 HDMI sources to a single HDMI display with this VigilLink 5x1 HDMI 2.0 Switcher | High-Speed HDMI Switchfrom VigilLink. The switcher supports up to UHD 4K resolutions at 60 Hz with a 18 Gb/s bandwidth as well as HDR, HDR10, Dolby Vision, HLG, and 3D video formats. Toggle between sources via IR remote or the panel button control. The device has low power consumption, so it does not require a PSU, simply use the included barrel connector to USB power cable.

5 x HDMI Inputs, 1 x HDMI Output    Supports up to UHD 4K at 60 Hz    3D Format Support, 18 Gb/s Bandwidth    IR Remote, Panel Button Control    Low Power Consumption

• HDCP 2.2/1.x and DVI 1.0 compliant
• Supports 18 Gb/s video bandwidth
• HDR, HDR10, Dolby Vision, and HLG are supported
• Supports video resolutions up to UHD 4K at 60 Hz
• Supports 3D video formats
• Low 1.5W power consumption
• IR remote and panel button control
• Compact design

Related Questions and Answers

Q: 1. Is the 4k quad i/o compatible with the tricaster mini 4k?

A: Yes the BirdDog 4K Quad NDI Encoder/Decoder is compatible with the NewTek TriCaster TC Mini 4K|NDI.

Q: 2. How is this "AVMATRIX Shark H4 Video Switcher" compare to the "Elvid VSW-4H-USB Video Switcher"? The same?? Thanks!

A: We have not done a comparison of the AVMATRIX Shark H4 4-Channel HDMI Video Switcher and the Elvid VSW-4H-USB 4-Input HDMI Broadcast Video Switcher. From comparing specs, the two switchers appear to be close to identical with potential software/support differences from each of the companies.

Q: 3. Can this product handle four simultaneous UHD 4K inputs converted to NDI? can it handle the reverse?

A: Yes, this has Four 12G-SDI connections that are selectable between and input or output. This is both an Encoder/Decoder.

Q: 4. Does this equipment work or not? Also, based on BD Website, the BNCs can be independently assigned as an encoder or decoder; is this not true?

A: The 4K Quads will be able to do that, once the final firmware is released. It is not in that current state, but eventually that feature is planned to be on the QUAD. Right now, you can ENCODE all or DECODE all.

Q: 5. can I switch 2 hdmi camera outputs 1080 to a single reference monitor?

A: Yes, the KanexPro 3x1 HDMI Switcher with 4K Support can switch between any amount of the 3 inputs available to a single reference monitor.

Q: 6. Does this come with a remote

A: Yes it does. This comes with an IR Remote Control.

Q: 7. Will this HDMI splitter work with the Blackmagic Ultra Studio Mini Recorder?

A: The UltraStudio Mini Recorder can accept signals up to 1080p in 30 fps. However, as this splitter will only output in a 60 fps signal, you may be limited to 720p quality for the Mini Recorder input.

Q: 8. When switching sources, does it cut or cross-fade? Also, what audio-follow features does it have?

A: This product does not provide a cross fade when switching sources. However you can select to have the audio be Source 1, Source 2, the Master Program or it can swap whatever is set for the master program.

Q: 9. can I use 2 of these to: 1) Turn SDI to NDI, TX across my network. 2.) use 2nd box to decode the NDI back to an SDI signal

A: The 4K HDMI unit is just an HDMI Encoder or Decoder. You will need a 4K SDI unit to encode SDI into NDI. Depending on how you want the signal to come out, you will need either an SDI or HDMI unit.

Q: 10. I have a dumb HDMI monitor, not a TV. Will this device extract the audio without audio feedback from the monitor?

A: The DVDO HDMI 2.0 Audio Extractor is capable of extracting 2 channel or 5.1 channel audio from an HDMI output device while still passing the audio with video over HDMI. To avoid feedback to external audio monitors, turn down to 0 on any audio from the source and destination display.