Record and playback your next masterpiece with the Behringer STUDIO L, a high-end studio control and communication center with Midas Preamps, 192 kHz 2x2 USB audio interface, and VCA stereo tracking, making it the ideal solution for home of professional studios.

Premium, ultralow-noise components and high headroom let your music shine at its best. Record vocals and instruments using the two Midas-designed microphone preamps into your DAW. Playback your recording and monitor using your two favorite pairs of powered monitors. Switching between different monitors can help you make critical decisions on your mix. There are also a pair of headphone outputs for quiet listening or recording in the control room. The STUDIO L also features an integrated talkback microphone, allowing you to easily communicate with artist in the live room. A power supply is included.

Ultralow Noise and High Headroom    Monitor Controller, Source Selector    Monitor Switcher, Talkback Box    Two Midas Microphone Preamps with +48V    2x2 USB Audio Interface 192 kHz / 24-Bit    True VCA for Precision Level Control    4 Inputs + USB Monitoring from DAW    Two Stereo Monitor + 2 Headphone Outputs    Built-In Talkback Microphone    Mono, Mute, and Dim Functions

• Premium, ultralow noise and high headroom studio control and communication center
• All-in-one master volume controller, source selector, monitor switcher, and talkback box
• 2 state-of-the-art, Midas mic preamplifiers with +48V phantom power
• Audiophile 192 kHz 2x2 USB audio interface, perfect for computer-based studios
• True VCA control for extremely precise level control and stereo tracking
• 4 inputs with level controls plus additional USB monitoring from your DAW
• 2 independent and adjustable monitor outputs to connect up to 2 sets of studio monitors
• Versatile talkback section with built-in microphone and level control
• Convenient mono, mute, and dim functions right at your fingertips
• 2 powerful headphone amplifiers with separate volume controls and source select switch
• Zero-latency direct monitoring with controlled blending between direct inputs and cue mix sources
• Quick-access aux input to connect your smartphone and music player for reference tracks
• High-precision dual LED meters for perfect level overview

STUDIO L comes with two state-of-the-art Midas microphone preamplifiers with +48V phantom power, ultralow noise, high gain, and audiophile quality.

• The STUDIO L is more than just a monitor controller, as Behringer added one of the best USB audio interfaces with the highest possible resolution and lowest latency. Full 192 kHz sampling rate at a clear 24-bit resolution will make you smile listening to the crisp and astonishing sound you’ll get.
• With the STUDIO L, you won’t have to worry about any USB noise or hum. It features a super-quiet USB I/O with a lower output impedance that allows for even higher output volume.

• The STUDIO L utilizes high-end Voltage Controlled Amplifier (VCA) technology. While conventional monitor controllers directly pass the signal through the volume potentiometer, the STUDIO L controls a separate high-precision amplifier circuit that drives the volume change. For perfect stereo and phase coherence, precision level adjustment, accurate sound, and no quality degradation over time.
• The large dial allows you to make precise adjustments with ease and set levels fast and accurately—critical to the final sound when it comes to mixing and mastering.

• The STUDIO L integrates seamlessly into your existing setup. You can even make it the centerpiece of your studio. Thanks to the built-in audio interface and Midas microphone pre-amps it becomes an all-in-one recording solution, just add your computer and you’re ready to go.
• Instantly switch between audio sources, USB and monitor outputs. The large volume knob makes it easy to dial-in the perfect level every time, without having to reach for your mixer—or your mouse. Now you can create powerful, custom monitor mixes. Plus, the built-in Talkback mic lets you communicate directly with the talent.

• The STUDIO L comes with two pairs of input connectors and a 3.5mm stereo input for connecting a smartphone or music player as well as two pairs of high-quality outputs to connect your favorite monitor speakers.
• The first 2 inputs can be fed by a line source or any type of microphone, in any combination—operating in dual mono or stereo-link mode. Not to mention the 2-Track output, which can be used for a variety of applications. Connect a 2-track digital recorder, an additional soundcard, mixer, or whatever you require.

• No need for a desk stand and an external mic to talk to the talent in the isolation booth. STUDIO L’s high-quality, built-in microphone is just a button push away, so you can save your mics for the drum kit. The onboard headphone amplifier section lets you connect 2 pairs of headphones with individual level controls and a common source selector, which will make the next session one of your best.
• The STUDIO L also comes with the most important switches exactly where you need them—right at your fingertips. Mono and Mute buttons and even a Dim switch, which instantly reduces the signal going to the monitor speakers by 20 dB. Perfect for momentarily lowering the volume to talk to someone without moving the knob.

Related Questions and Answers

Q: 1. Hello,I need a lightweight battery powered preamp. It will be used for nature sounds recording with a matched pair Rode NT5 and a Tascam DP008EX recorder. This preamp doesn't have XLR outs bu 1/4'', and the recorder has 2 1/4'' inputs. Is it possible to use this preamp with my recorder?Thanks!Dani

A: Hi Dani,Yes, you can use the 1/4 outputs from the preamplifier to directly drive the 1/4 inputs in your recorder. you only need to buy or build two simple cables with plugs at both ends. As far as signal voltage levels are concerned, I don't expect any problem because you can comfortably adjust the preamplifier monitor level to prevent saturation of your recorder inputs (by the way, the 1/4 outputs and the 1/8 outputs both depend on the monitor knob). As far as equalization is concerned, I don't expect a problem either, assuming the recorder inputs have a flat response - i.e. are not designed for musical instruments (if the latter applies, you might need re-equalization during recording or playback, but I'd not consider this as a drawback). Therefore, this wonderful preamplifier meets your needs. Cheers from Italy.

Q: 2. What are the dimensions of this unit?

A: It is 4.6" wide x 4.7" deep x 1.75" high.

Q: 3. Are the pre-amps improved comparing to the old dr-40 version ?

A: The preamps are slightly improved from the first version, a audio interface was integrated allowing to transfer data via USB from the DR-40 to the computer , in addition a dictation mode was added designed for human voice recording and transcription.

Q: 4. Can you use this with a DSLR to record sound?

A: Yes, the DR-40X can be used to record audio for video filmed with a DSLR camera. The audio tracks recorded on the DR-40X can be combined with the video tracks in post production.

Q: 5. record phone call from smartphones?

A: Recording a smartphone call to a device like the Tascam DR-40X 4-Channel / 4-Track Portable Audio Recorder may prove difficult, as the hardwired output from the phone will typically only send audio from the caller on the other end into the recorder. In theory, the person on the recording end of the call could connect a microphone to the second input on the DR-40X and speak into the microphone while using the phone like a speakerphone. There are devices designed to simplify this scenario, such as BH #JKCELLTAP4C JK Audio CellTap 4C Wireless Phone Audio Tap Adapter, which can output both sides of the call to a recorder. The easiest method may be to identify an application compatible with your specific smartphone that is capable of recording the phone call directly to your phone.

Q: 6. Will this work as a headphone amp/ dac as well as microphone amp? Am wanting to improve sound from laptop to headphones

A: Do not understand what you mean with dac . If the purpose is to improve the laptop output, I suggest you look for something else, as this pre-amp was conceived for high quality Analog to Digital Conversion (ADC) from microphones. The headphone level you've got with this pre-amp is just for monitoring purposes during recording, thus the output level is quite comparable to what's provided by a laptop.

Q: 7. I'm getting really low monitoring through headphones on this. even turned up to 10 and balanced to hear the preamp only. Does anyone else have this issue?

A: I haven't heard of this issue per-say. The first thing I'd look at would be the impedance specification on my headphones. If it's on the high side, I'd consider getting a headphone amp, or headphones with a lower impedance.

Q: 8. Can one use this simply as a stereo mic amplifier with a 9v battery and no USB connection?

A: The ART USB Dual Pre can operate as a standalone mic preamp using 9V battery or AC power.

Q: 9. Is it possible to record from the XLR inputs and the onboard mics simultaneously?

A: Yes. Its on-board unidirectional condenser mics can be set for a wide or tight stereo image, and may be used simultaneously with the mic/line combo inputs.

Q: 10. Does it work combining the Right and Left output into single mono output by using a Y-cable?

A: Yes, it does. I use it with GarageBand and both microphones are being used. I am a hypnotherapist and needed two mins to record both my client and myself and it works perfectly. Hope this helps.