Explore the universe of modular synthesis with the Behringer System 55, an authentic recreation of the original, vintage Moog System 55 modular synths that includes 38 modules including 7 VCOs, several filters, envelopes, amplifiers, a sequencer, and a MIDI to CV converter. The instrument comes preassembled in two Eurorack Go cases. Three rows are populated, while the fourth row has been intentionally left blank with up to 144 HP of expansion to truly customize your experience. Two power supplies are included, one for each case.

Inspired by Original Moog SYSTEM 55    Authentic Reproduction of Circuits    Vintage Sound of the ' 70s    38 Modules Based on Vintage Moog Design    Includes MIDI to CV Converter Module    144 HP of Expansion Space    Includes 2 EURORACK GO Cases    Includes Brackets for Stacking Cases    Includes Power Supply

Pre-assembled SYSTEM 55 modular synthesizer with 38 vintage sounding modules from the ’70s

• 1 x 914 Fixed Filter Bank with 12 active bandpass filters ranging from 125 Hz to 5.6 kHz and LP/HP filters
• 1 x 923 Filter modules with 6 dB low and high-pass filters and white/pink noise sources
• 1 x 904B Voltage Controlled High Pass Filter and 1 x 904A Voltage Controlled Low Pass Filter
• 1 x 992 Control Voltages module allows CV mixing and switching with 1 inverting attenuator
• 5 x 902 Voltage Controlled Amplifier with 3 summed CV inputs and dual audio inputs and outputs
• 4 x 911 Envelope Generators with S-trig inputs and CV outputs
• 1 x 911A Dual Trigger Delay module with S-trig input and output
• 2 x 921A Oscillator Driver with 6x 921B VCOs and 1x 921 VCO gives you 7 fully featured voices
• 1 x 960 Sequential Controller module provides up to 24-step sequences in 8 steps with 3 rows
• 1 x CM1A MIDI to CV converter enables control by MIDI keyboards or DAW, V-trig or S-trig outputs
• 3 x CP3A-O module allows CV mixing and switching for the VCOs with 1 attenuator
• 3 x CP3A-M 4 input mixer with master level, 4 outputs and 2 sets of 4 multiples
• 2 x 995 Attenuators modules with 3 linked passive attenuators
• 1 x 903A Random Signal Generator module provides dual white and pink noise sources
• 1 x CP35 Attenuators module with 4 linked attenuators, 2 sets of 4 multiples and reference voltages
• 1 x 961 Interface module converts multiple V-trig to S-trig for compatibility with other Eurorack modules
• 1 x 962 Sequential Switch module expands the 960 module into a 24 step sequencer
• 1 x BP28, 2x BP56 and 2x BP2 blanks panels for a total of 144HP expansion space
• 1 x CM1A MIDI-to-CV converter enables control via MIDI keyboards or DAW, V-trig or S-trig outputs
• 2 x Eurorack Go cases including PSUs
• 2 x Eurorack Go Brackets to link the 2 Eurorack Go cases together for easy patching

The System 55 is an amazing tool for those who want the ultimate modular synthesizer, capable of fully scoring the next cyberpunk or sci-fi movie from start to finish. This entire setup comes equipped with a 914 Fixed Filter Bank, which features 12 active bandpass filters ranging from 125 Hz to 5.6 kHz with additional Low Pass and High Pass filters, and one 923 Filter module with separate Low and High Pass filters, each with its own dedicated frequency cutoff control and jacks for both pink and white noise. But that's only the start—the System 55 comes with so many modules, you're sure to have hours and hours of fun creating beats into which you can just lose yourself.

The System 55 features five 902 Voltage Controlled Amplifiers with three summed CV inputs and dual audio inputs and outputs. Each module comes with a rocker switch that allows you to toggle between linear and logarithmic response modes, while you can manually set the control voltage with the Fixed Control Voltage knob. The System 55 comes with four 911 Envelope Generators, allowing you to create a deeply contoured signal with each of their 4 independent controls for Attack (T1), Decay (T2), Release (T3) and Sustain times from 2 ms up to 10 seconds. Create snappy and percussive sounds or long evolving drones, perfect for a funky groove or a brooding soundtrack to your latest techno thriller.

• The 960 Sequential Controller is an 8-step sequencer with 3 rows of CV controls for adjusting the pitch of a signal at that stage. 
• An additional 9th step can also be used to stop the sequence. 
• More variations can be achieved by switching any of the desired Stage Mode Switches to Normal, Skip or Stop. Manually trigger each stage by pressing the respective Set button. 
• The 962 Sequential Switch module transforms the 960 from an 8-step sequencer to a 24-step giant capable of more intricate sequences and beats.

• The 961 Interface module converts V-trig to S-trig and vice versa, and can even convert any audio source you plug in to a V-trig to drive other modules in your setup. 
• The 903A Random Signal Generator provides two white and pink noise sources that you can patch to other modules in the System 55.

The System 55 comes with a 992 Control Voltages Module that allows you to mix and switch control voltages, and 904B High Pass Filter and 904A Voltage Controlled Low Pass Filter, and a CM1A MIDI-to-CV converter, so you can control the System 55 with a MIDI keyboard, sequencer or DAW, to truly round out this rig. Several blank panels have been included to allow you to expand the System 55 with even more modules. You don't even have to worry about power as the included Eurorack Go cases come with their own PSUs.

Related Questions and Answers

Q: 1. Is this uninterruptable, any way to fast-switch the replaceable battery without losing output power? Perhaps daisychain 2 units?

A: Connecting it to a power source and using the pass through feature, you should be able to switch the battery although Omnicharge does not specifically mention this on the user manual. They do not have an official daisy chain feature but that could work too, we could not guarantee it.

Q: 2. Does it provide A/C power? I need something that can power TV monitor for upcoming show.

A: Yes in provides AC Outlet: 220V 120W Pure Sine Wave DC Out: 5-60V 150W (Adjustable Voltage & Amperage) USB-C Port: 60W (Input & Output) 2 x USB-A Ports (QC 3.0 compatible) 34,800 mAh (2.5 Hour Recharge Time) Removable Battery.

Q: 3. Will this power a Pioneer XDJ-RX2 Dj controller if the power requirements are AC 110 V -240 V, 50 hz/60 hz with a power consumption of 41 W? And if so, for how long?

A: Yes, the omnicharge Omni Ultimate Power Bank BH #OMOP2FA001 can power the Pioneer XDJ-RX2 DJ Controller. As far as how long it will last, that will highly depend on the power load, at a constant 41W, you should be able to get at least 2 hours.

Q: 4. What part number is the rackmount ears?

A: There are no rack ears developed for the Marshall Electronics V-LCD241MD 24" LCD Desk Rackmount Monitor with 3G-SDI Module. The monitor is too wide.

Q: 5. is it a Macintosh compatible monitor?

A: Yes, the Dell UltraSharp 38" 1600p Curved Monitor is compatible with MacOS.

Q: 6. Could I use this device in Europe with 220V ?

A: This device is made for US consumption. For the safest results it should be used with an international converter.

Q: 7. On a scale of 1 to 5, how sturdy do you think this stand will be when extended to nearly its full height and topped with a 36" x 16" surface weighing about 15 lbs?

A: 6 built like a rock.

Q: 8. Does it Work, can it charge a Macbook pro 16 M1/M2 ?

A: The omnicharge Omni Ultimate Power Bank (38,400 mAh) BH #OMOP2FA003 is capable of 120w AC out. The Apple depending on model will need up to 140w.

Q: 9. Is it possible to mount/suspend this arm from above?

A: The MBA38 is not intended to suspend from above. It does come with two types of mounts -- a clamp style mount and permanent flange mount. The stem for the arm inserts into the mount from the top. You could attach the clamp mount to a shelf and then position the arm so the mic comes downward, but the arm can not be mounted upside down.

Q: 10. Can we get pics for this? I'd like to see interior, dividers, compartments, loaded with gear, etc.

A: Unfortunately, neither B&H nor Porta Brace have supplied such images. If you Google Image search, there is one that shows the main compartment divided into three parts with a Sony camcorder in it.