Corsair 3500X Argb Mid-Tower Atx Case White

Corsair 3500x Argb Mid-tower Atx Case White

Product Code: eq159987
Availability: In Stock

$329.97 $412.46

Qty

13 reviews Write a review

Description
Reviews (13)

Showcase your next custom-built PC in the white Corsair 3500X ARGB Mid-Tower ATX Case Whitefrom Corsair. Behind the wraparound glass there is plenty of space for your preferred components an ATX, micro-ATX, mini-ITX, or E-ATX motherboard, four drives, a graphics card up to 16.14" long, and more. Even horizontal expansion slots are present, in addition to four vertical expansion slots, which allow you to show off your GPU with a vertical mount. Graphics cards up to 16.14" in length are supported, as are CPU coolers and ATX power supplies measuring up to 6.7 and 7.1".

Keep components cool thanks to the three preinstalled 120mm RGB fans, support for up to ten 120mm fans, and the separately sold iCUE LINK System Hub, which reduces cable clutter. If you prefer to use a liquid cooling setup, there is support for a 360mm or 280mm radiator in the front of the case, a 360mm radiator in the top of the case, and a 120mm radiator in the rear of the case. Dust filters at the bottom, top, and side of the case help keep your build looking clean. Utilizing a steel frame for durability, the tempered glass front and side panels put components and lighting on full display. A top I/O panel sports two USB-A 3.2 Gen 1 ports, a USB-C 3.2 Gen 2 port, and a 3.5mm combo audio jack.

E-ATX, ATX, Micro-ATX & Mini-ITX Support Steel Frame & Windowed Side Panels 2 x 2.5" Drive Bays 2 x 3.5" Drive Bays 7 x Expansion Slots USB 3.2 Gen 1 and Gen 2 Ports 3 x RS120 ARGB 120mm Fans Support for Liquid Cooling Systems Supports GPUs up to 16.14" Long iCUE LINK System Hub Compatible

Key Specs
Motherboard Support	ATX, E-ATX, Micro-ATX, Mini-ITX
Internal Drive Bays	2x 2.5/3.5"
Drive Mounting (Non-Bay)	Motherboard Tray 2x 2.5/3.5"
Expansion Slots	7x Full Height + 4
Maximum GPU Length	16.1" / 410 mm
CPU Cooler Height	6.7" / 170 mm
Fans Included	Side: 3x 120 mm LED (Variable rpm)
I/O	2x USB-A (USB 3.0 / 3.1/3.2 Gen 1) 1x USB-C (USB 3.1/3.2 Gen 2)
Windowed Panel	Yes
Built-In Lighting	No
Tool-Less Design	Thumbscrews, Screw-Less Drive Bays
Compatibility
Motherboard Support	ATX, E-ATX, Micro-ATX, Mini-ITX
External Drive Bays	No
Internal Drive Bays	2x 2.5/3.5"
Drive Mounting (Non-Bay)	Motherboard Tray 2x 2.5/3.5"
Expansion Slots	7x Full Height + 4
Maximum GPU Length	16.1" / 410 mm
CPU Cooler Height	6.7" / 170 mm
Supported PSU Size	ATX
Maximum PSU Length	7.1" / 180 mm
PSU Mounting Location	Bottom
Cooling
Fan Mounting	Top 3x 120 mm or 2x 140 mm Rear 1x 120 mm Bottom 1x 120/140 mm Side 3x 120 mm or 2x 140 mm Internal 2x 120 mm
Fans Included	Side: 3x 120 mm LED (Variable rpm)
Maximum Radiator Size	Rear, Side, Top: 360 mm
Fan Controller Included	No
Filter Locations	Bottom
Inputs / Outputs
I/O	2x USB-A (USB 3.0 / 3.1/3.2 Gen 1) 1x USB-C (USB 3.1/3.2 Gen 2)
Media/Memory Card Slot	No
Audio I/O	1x 3.5 mm Input/Output
Display Outputs	No
Physical
Windowed Panel	Yes
Color	White
Material	Steel, Tempered Glass
Built-In Lighting	No
Tool-Less Design	Thumbscrews, Screw-Less Drive Bays
Cable Management Space	Yes
Dimensions (W x H x D)	9.4 x 19.9 x 18.1" / 240 x 506 x 460 mm
Weight	23.24 lb / 10.54 kg

Show off your components and RGB lighting thanks to the tempered glass front and side panels with dedicated front ventilation channels for ample airflow to your system components.

A spacious interior fits up to ten 120mm or five 140mm cooling fans, along with multiple radiators including space for a 360mm radiator in the top, a 360mm radiator in the side, and even a 120mm radiator on the back of the case.

The 3500X ARGB fits up to two 2.5" SSDs and two 3.5" HDDs, with a relocatable SSD tray that can be moved to the front of the PSU cover.

With the included vertical PCIe slots and a screw mount for a Corsair PCIe 4.0 extension cable (sold separately), you can show off your GPU and keep it secure at the same time.

The modern-style, front-panel I/O includes two USB-A 3.2 Gen 1 ports, a USB-C 3.2 Gen 2 port, and a combination audio/microphone jack.

Related Questions and Answers

Q: 1. I have a Canon 5DS R. Does this card cut down on the huge lapse in RAW/in-camera processing? ie: basically the time between shots. I am currently using SD cards.Thanks!

A: CFast works ONLY on cameras that have a CFast port. The card slots are different from any other card. You couldn't use a regular CF card on a CFast port or vice-versa.

Q: 2. Will this work on a canon 5d mark II

A: No. Requires a Cfast interface which, to date, is only in the Canon 1DX Mark II.

Q: 3. Do this CF Works with the Nikon D800E???

A: That camera uses Compact Flash and SD Cards, so this one will not work.

Q: 4. Does this work with the BMPCC6k with 6k braw

A: Only the Lexar 128GB Professional 3500x CFast 2.0 Memory Card is approved by Black Magic for recording 6K on the Blackmagic Design Pocket Cinema Camera 6K.

Q: 5. How many minutes of 4k video will this provide on a Canon Eos 1dx2?

A: Sorry but I can't help with the answer since I don't shoot video.

Q: 6. Will this work on the nikon z6?

A: No it will not. This is a CFast card, the Nikon Z6 uses an XQD or CFexpress card.

Q: 7. Are these CFExpress cards?

A: No, these are Cfast cards, different from Cfexpress.

Q: 8. Hi, I still never purchased any CFast 2.0 card but have many Compact Flash card cases.Do the CFast cards have the same size than Compact Flash so they can fit those cases (Pelican)?I wouldn't like to buy more cases if CFast 2.0 cards fit on Compact Flash's cases..Thank you very much!!

A: The CF cards are the same size as the CFast cards, however, a CFast card will not fit in the standard camera slot designed for CF. CFast needs a camera and card reader compatible with CFast.

Q: 9. DOES IT WORK WITH CANON 1DX mark I?

A: No the CFast cards will not work in the Canon 1DX Mark I, it only takes CF cards

Q: 10. Is this MLC or SLC?

A: at information is not given by Lexar to customers. And that goes for most Memory card manufactures.

Aleksandr	14/09/2024
[Yes] It’s big, it definitely won’t be too hot for the video card. You can install large fans and not worry about noise. Through the glass side panel, everything inside is visible. 5

Anthony	11/09/2024
[White] Double the width of my old tower build but so much cooler. Plenty of room for building a clean machine, the 4 touch screen is just over the top. Buying from B&H was my third stop. Newegg wanted $500+ for it, Another place didn't tell you it was back ordered until after you finished the buying process. Even Hyte themselves had the cases on backorder. So I was a little worried at first that B&H would send me a backorder text but instead I got a tracking number. So happy with my B&H purchase, arrived in perfect condition. 5

Michael	03/09/2024
[Bottom] Biggest mid tower i have seen fit everything great inside looks awesome with all the rgb piece inside. 5

Derick	12/07/2024
[White] Some notes: plenty of room for builds, easily the best case I've built into. Lots of great features such as snap-on panels and filters. Some advice: The y70 touchscreen uses an internal USB 9pin mobo connector for input, make sure your case has at least 3 USB 9pin headers if you're using an AIO cooler and fan controller like lian li SL infinity. Otherwise make sure you have an internal splitter. The side / front intake: I opted for recer blade lian li infinity fans so the frame isn't showing. 5

Jeremy	03/07/2024
[White] The Hyte Y70 touch nails it on all levels. From motherboard support up to EATX which I am currently using to 360 mm radiator support on the top and side of the case, Hyte has you covered. Installation in this case was great. The only challenges came into play when plugging in the front panel audio header on the motherboard due to the riser cable for the vertical GPU mount obstructing the view and fitting 3 Lian Li SL 120 fans in the bottom. I was able to do both. They just had to be finessed a bit due to the case design. Aside from these two areas, the case is perfection. Plenty of room for my RTX 4090, EATX ROG mobo, and ten fans. I loved the experience of building in this case. It is a showstopper. Sorry for the glare in the pictures. I was too lazy to pop off the side panel. 5

Mike	03/06/2024
[2x 2.5/3.5" ] I upgraded to this case from a Fractal Meshify 2 case in black. I wanted to go with a snow white build and have room for growth. This case is great, easy to work in and manage cables. I felt like it is well worth the money and am super satisfied with the quality. B&H did a great job getting it to me in only about 2 days (across country too)! It’s a thicc boy, so make sure you measure out a good spot for it if you do make the purchase. I absolutely love this case and was glad to see B&H had it in stock. 5

Tianna	09/05/2024
[2x 2.5/3.5" ] After having issues with Corsair directly, I decided to purchase one of their cases through B&H. My case arrived on time and undamaged. And the best part; I didn't even have to assemble it myself! The box it came in was considerably damaged, but thankfully my case was unharmed. Make sure you're there when your shipment arrives so you can note any damages with the delivery prior to accepting the shipment. I got lucky, but returns and warranty are a real concern, so make sure they'll honor it. 5

Kenny	07/05/2024
[Bottom] I love the OG Y70 Touch! First time building a PC in over 2 decades and this bad boy made the transition so easy! Sadly, there's a big chance as of this review that they won't have the 4K screen again but they will be making a 2k (most likely) one in Q3 2024! Snatch it! 5

Todd	02/05/2024
[2x 2.5/3.5" ] Some complain about the air flow but no problem here with 6 intake and 4 exhaust. Plenty of room for the Rtx40 series and for neat cable management So far so good 5