Clean up your studio and make your creative life easier with the Behringer PX3000. This 48-point patchbay features high-quality, fully balanced 1/4" TRS jacks and three different modes, so you can customize how connections are routed.

Streamlines Cables and Connections    48-Point Studio Patchbay    Balanced 1/4" TRS Connectors    4 Groups with 3 Mode Settings    Normal, Half-Normal, and Thru Modes

• The PX3000’s three modes are user-assignable via the top-panel switches for extreme flexible functionality.
• Normal interconnects the two rear jacks of one channel; inserting a plug into either of the front jacks interrupts the connection of the rear jacks.
• Half Normal interconnects the two rear jacks of one channel; inserting a plug into the lower front jack only interrupts the connection of the rear jacks.
• The third mode, Thru, interconnects each rear jack with its corresponding front jack.

• Professional patchbay eliminates cable clutter in your studio and adding order and clarity
• Fully balanced high-quality 1/4" TRS connectors
• 3 modes, easily selectable per channel via top-side switches
• Normal interconnects the two rear jacks of one channel; inserting a plug into one of the front jacks interrupts the connection of the rear jacks
• Thru interconnects each rear jack with its corresponding front jack
• Half Normal interconnects the two rear jacks of one channel; inserting a plug into the lower front jack interrupts the connection of the rear jacks

Related Questions and Answers

Q: 1. What is the difference between this and YN-600L?

A: The YN600LW and YN600L IIW are Daylight units. The YN600LC is Bicolor. The YN600 IIW has wireless control.

Q: 2. Is there a way to display the continued measurements in the 5-Degree Viewfinder Spot using the L-478DR-U light meter as Sekonic L-758DR Spot meter does?

A: The Sekonic 5 Degree Spot Viewfinder for Litemaster Pro L-478D, L-478DR Lightmeter does not have a built-in LCD display. As such, when using the Sekonic LiteMaster Pro L-478DR-U Light Meter for PocketWizard System, you will need to look at the LCD screen built onto the light meter itself.

Q: 3. Will this work with my canon EOS RP with the canon Speedlite 430EX III-RT Camera Flash? Trying to figure out which radio module.

A: Unfortunately Sekonic RT-EL/PX Elinchrom & Phottix Transmitter Module is not compatible with Speedlite 430EX III-RT Camera Flash. Sekonic does not make a radio module for that flash. What you will need to do is press on the light meter to read the flash. It will then wait 90 seconds for a flash to fire. You will then need to fire the flash separately. Then the meter will read the flash and give you a meter reading.

Q: 4. Will this work with Phottix Odin II receivers?

A: No; it only communicates with receivers using Strato II protocol.

Q: 5. Is there an elincrhom transmitter module that works for the sekonic L758DR? thank you!

A: Unfortunately, Sekonic only made a module for Pocket Wizard to work with the L-758DR.

Q: 6. will this work with Godox 2.4GHz strobes?

A: Unfortunately, this module is not compatible with Godox 2.4GHZ strobes.

Q: 7. Can this be used on a Sony a7ii?

A: You could most certainly use this On-Camera light with the Sony A7II.

Q: 8. Will this Stabilizer work with a SONY xcam video camera? The weight isn't the issue, about 6 lbs just the mounting plate really.

A: The Flycam 3000 Video Camera Stabilizer can work with payloads of up to 7.5 lb. You may also want the following vest and arm option to assist with the heavy payload: the Flycam Comfort Arm Vest Support for Camera Stabilizers (B&H # FLCMFTAV).

Q: 9. Will this work on a westcott? Fj400?

A: The Sekonic RT-EL/PX Elinchrom & Phottix Transmitter Module cannot trigger the FJ400 wirelessly.

Q: 10. What size barrel connection is the 6-9v AC power supply ?

A: unfortunately the manufacturer does not specify the size of the Ac barrel connection