The Bosch DIVAR IP 4000 Series Appliance 8TBfrom Bosch DIVAR IP 4000 Series Appliance 8TBis user-friendly recording, viewing, and management solution that supports network surveillance systems with up to 32 channels. Built with a mini tower form factor, it combines advanced Bosch Video Management System capabilities and recording management into an IP recording device for IT-minded customers.

For recording video at resolutions up to UHD 4K at 30 Hz at 250 Mb/s, users will be able to take advantage of two SATA III 3.5" drive bays, each of which is equipped with a 4TB hard drive for a total storage capacity of 8TB, while accessories may be connected using four USB-A 3.2 Gen 2 ports, two USB-A 2.0 ports, a 3.5mm mic input, and a 3.5mm line output. Network connectivity is achieved using two Gigabit Ethernet ports and a maximum of three 4K/30 Hz displays are supported using a 4K/60 Hz DisplayPort 1.2 output, a 4K/60 Hz HDMI 2.0 output, and a 4K/30 Hz HDMI 1.4 output. Using the Video Security app, it is possible to remove view recorded content.

Please note that while up to 32 channels are supported, only 8 channels are pre-licensed.

Supports up to 32 Channels    8TB Storage Capacity (2 x 4TB)    2 x SATA III 3.5" Drive Bays    Recording Rates up to 250 Mb/s    2 x Gigabit Ethernet Ports    HDMI 2.0 | HDMI 1.4 | DisplayPort 1.4    4 x USB-A 3.2 Gen 2 | 2 x USB-A 2.0    Advanced User and Alarm Management    DIVAR IP System Manager    Three Operating Modes

• All-in-one, fully featured BVMS-based video recording and management solution for up to 32 channels
• Robust, secure operation—instant real-time access to video
• BVMS-based advanced user and alarm management
• DIVAR IP System Manager for operation mode selection, software setup and upgrades

DIVAR IP All-in-One 4000 devices can operate in three different modes:

• Full video recording and management system, utilizing the BVMS and Video Recording Manager core components and services. This mode provides an advanced IP video security solution that delivers seamless management of digital video, audio, and data across an IP network. It seamlessly combines IP cameras and encoders, provides system-wide event and alarm management, system health monitoring, and user and priority management. This mode provides the best video management system to go with Bosch video surveillance devices, leveraging the unique capabilities of Bosch cameras and recording solutions. It includes Video Streaming Gateway components to integrate third-party cameras.
• Advanced video recording solution for a BVMS system, utilizing the Video Recording Manager core components and services, leveraging the unique capabilities of Bosch cameras and recording solutions. Up to two Video Recording Manager servers can be added to a BVMS system running on a DIVAR IP all-in-one device.
• iSCSI storage expansion for a BVMS system, which runs on a different hardware. Up to two of these iSCSI storage expansions can be added to a BVMS system running on a DIVAR IP all-in-one 4000 device.

DIVAR IP all-in-one 4000 devices utilize embedded design and core components and are based on the operating system Microsoft Windows Server IoT 2022 for Storage Workgroup. DIVAR IP all-in-one 4000 devices feature front-swappable SATA III 3.5" drive bays, each of which has a a 4TB hard drive for a total storage capacity of 8TB.

Once started, the system will offer installation of the DIVAR IP System Manager application, which will guide you through the operation mode selection. Latest software packages can be installed in one step. The system features wizard-based BVMS setup and configuration to begin recording after just a few simple steps.

DIVAR IP System Manager provides a central user interface for operation mode selection and for software setup and upgrade, which reduces installation and training requirements and keeps ongoing system management costs low. When DIVAR IP all-in-one is connected to the Bosch Remote Portal, Remote System Management service allows to leverage the power of the Internet of Things (IoT) to provide an easy-to-use set of tools and capabilities for secure, transparent, and cost-effective asset management throughout the life cycle of a device or system. This service enables users to perform inventory and update management as well as health monitoring tasks for an entire system from one centralized Remote Portal platform. The DIVAR IP all-in-one 4000 devices provide SNMP monitoring support for the system's hardware and for the video management applications to ensure maximum uptime.

View high-quality HD or UHD video despite low or limited bandwidth connections. Dynamic Transcoding technology ensures you can view your video immediately—anytime, anywhere. Dynamic Transcoding decodes and re-encodes the data stream to a lower rate bit stream tailored to the bandwidth of the connection. When the video is paused, the instant detail enhancement feature instantly displays the full resolution video. DIVAR IP All-in-One 4000 systems support transcoding of up to four 4K UHD 30 fps streams.

For remote viewing of a single DIVAR IP All-in-One system, BVMS Operator Client is included. For multiple systems, add them to BVMS Enterprise Management Server. Alternatively, use the Video Security app for remote viewing from mobile devices.

This unit comes with 2 x 4TB hard drives from the factory that are ready to record out-of-the-box. It is possible to swap out the drives, but any newly installed ones will need to be configured before using them for video recording.

DIVAR IP all-in-one 4000 units come pre-configured in a standard non-RAID configuration and have following specifications:

• Total Pre-Installed Gross Storage Capacity: 2 x 4TB
• Net Capacity: 7448GB
• Maximum Recording Bandwidth: 250 Mb/s
• Maximum IP Camera Channels: 32

Related Questions and Answers

Q: 1. Can one display directly from the workstation with or without the help of decoder or must one install the software to help in accessing the NVR?

A: You will be able to connect a monitor to this workstation using either a DVI or DisplayPort.

Q: 2. Will the PR4100 work with 20TB hard drives?

A: There is no practical limit on the size of drives you can use with an enclosure like this, 20TB should be perfectly fine.

Q: 3. Does this allow for hot swaps?

A: The WD My Cloud Pro Series 56TB PR4100 4-Bay NAS Server (4 x 14TB) BH #WEBNFA0560KB does not have the ability to hotswap drives.

Q: 4. Are the two hard drives WD Red drives? Are the hard drives installed by WD or B&H?

A: The exact model of the drive is not specified. The drives are installed by WD.

Q: 5. Are the SATA Hard Drives RED PRO drives?

A: Yes, the WD My Cloud Pro Series 56TB PR4100 4-Bay NAS Server (4 x 14TB) BH #WEBNFA0560KB uses Red Pro drives.

Q: 6. how to use in the model bgm function ?

A: When using a CD player, tuner or other auxiliary device for background music, connect the line-out connectors of the music source to the RCA line inputs of the unit. Microphone inputs 1 and 2 can be set for priority over the music by setting the dipswitches located on the rear of the unit. The operation manual is available for download with directions on proper settings. http://bit.ly/1GtO9Ma

Q: 7. I live outside the US and the voltage here is 240V my question is if I bought a NAS from the US will I be able to use it or is it strictly 100V?

A: The power supply supports 100-240v.

Q: 8. Does it work if I just plug in two WD Red disks leaving the other two slots empty? I was planning to plug in just two 10GB (each) disks leaving the other two ports empty to fill with new disks some day in the future... Thanks!

A: Yes you can occupy just two of the four bays. You may have limited options when upgrading to 4 drives later.

Q: 9. Can I use this as server. If yes, what is the speed of this server?

A: It can be used as a server. It has a 1.6 GHz Intel Pentium N3710 Quad-Core CPU.

Q: 10. What is the speed of the SATA drives 5400 or 7200 in the WD PR4100?

A: This comes with 7200RPM drives