Designed for mobile video surveillance onboard transit vehicles like buses, the Axis M3905-R 2MP Indoor Dome Camera M12 10-Packfrom Axis M3905-R 2MP Indoor Dome Camera M12 10-Packuses a 1/2.9" progressive scan RGB CMOS sensor to capture 1080p resolution video at 30 fps. The included 2.8mm fixed lens delivers a 107° horizontal angle of view. Integrated PoE technology simplifies connectivity by enabling the transfer of power and data through a single cable. A memory card slot accepts microSD/SDHC/SDXC cards (available separately).

This camera complies with ONVIF profiles G, M, S, and T, making it compatible with a wide range of surveillance devices. It is housed in an IP67-, NEMA 4X-, and IK10-rated enclosure for protection from water and impact.

Designed for Transit Surveillance    1080p Resolution at 30 fps    2.8mm Fixed Lens    107° Horizontal Angle of View    M12 Ethernet Port with PoE Technology    Supports microSD/SDHC/SDXC Cards    Complies with ONVIF Profiles G, M, S & T    IP67/NEMA 4X Rated for Water Protection    IK10-Rated Impact Resistance

Compact camera designed to be installed onboard transit vehicles like buses

Complies with transportation-industry regulations, including fire safety for buses

Traffic Light mode enables the camera to distinguish traffic light colors in low-light conditions

Optional lenses (available seperately) for adjusting the angle of view for customized monitoring

Lightfinder and forensic WDR (120 dB) technology for low-light applications

Axis Zipstream technology lowers bandwidth and storage requirements

Controllable frame rate and bandwidth (VBR/ABR/MBR H.264/H.265)

Video streaming indicator

Digital PTZ, preset positions, guard tour, and control queue

3D-DNR/2D-DNR

Image settings include compression, brightness, sharpness, contrast, white balance, forensic WDR, exposure control, exposure zones, fine tuning of behavior at low light, 0, 90, 180, and 270° rotation including corridor format, dynamic overlay, 32 individual polygonal privacy masks, mirroring of images, and scene profiles (forensic, vivid, traffic overview)

Analytics include Axis Video Motion Detection and active tampering alarm, with support for Axis Fence Guard, Axis Loitering Guard, Axis Motion Guard, and third-party applications

PVC and BFR/CFR free

Related Questions and Answers

Q: 1. Can it fit a Polsen VM-101 microphone?

A: No, the Rycote 104406 5cm Standard Hole SGM Foam is not wide enough to fit the Polsen VM-101 Microphone.

Q: 2. Is it compatible with Dji osmo action 4?

A: According to Hohem, the iSteady Pro 4 is compatible with the DJI Osmo Action cameras - as well as GoPro Hero 11/10/9/8/7/6, Insta360 ONE R, and other action cameras with similar size.

Q: 3. Will this work with GoPro hero 12?

A: Yes, the Hohem iSteady Pro 4 3-Axis Action Camera Gimbal Stabilizer is compatible with the GoPro Hero 12.

Q: 4. Does it have a way to use a phone as well?

A: No, the Hohem iSteady Pro 4 3-Axis Action Camera Gimbal Stabilizer is designed for small action cams only.

Q: 5. Can this compatible with Godox Projection Attachment for ML30? If its not can u recommend . Thanks

A: The Westcott Environmental Gobo Pack for Optical Spot by Lindsay Adler (10-Pack) will work in the Godox Projection Attachment for ML30 and ML60 LED Lights (36°). It uses the M size gobos.

Q: 6. Is the Hohem ISteady Pro 4 water resistant or waterproof?

A: The Hohem iSteady Pro 4 is IPX4 splash proof, resistant to water splashes from any direction, feel free to go out on rainy or snowy days.

Q: 7. Does this product work with sanken cos-11d?Thanks

A: No sure if they will work with Sanken mics. The mics must fit snugly into the holder. I wasn't able to find information about the diameter of that mic. It does work well with the R0de mics.

Q: 8. What Protocol does this head uses to? RS 422? (VISCA) So any device or controller with RS 422 can control this? Like software based or any controller with VISCA protocol? or does it only works with your controller? Need a lot of information here. If it's visca protocol is it the standard visca protocol or a modified visca protocol? How about the Motor speed or angle? Can you please put a lot of information for this? Thanks

A: You can use LANC for the camera with the SalRay Works 5-Channel Controller( BH #SAMTTX90 • MFR #SRW-MT-TX90 You can use Panasonic protocol with the SalRay Works 4-Channel Controller BH #SAMTTX80 • MFR #SRW-MT-TX80

Q: 9. I'm planning to mount my photos on the wall without frames as an inexpensive way to show my work yey allow me to swap things out easily. The previous foam board i used warped and some pieces had a wavy surface. How is the flatness and stability of this product?

A: These foamboards will maintain flatness and would be very stable for mounting images to your wall.

Q: 10. is this a fisheye lens?

A: I wont be able to check this lens for another few weeks because the cameras are installed on a model to record laboratory testing.The 3.7 mm lens that comes with the camera has a lot of fisheye. A flat surface in the upper part of the camera view looks bent.The 2.8 mm lens has just a very minor amount of fisheye. If you do not point it out to someone most people would not even notice. I used an 8 ft flat steel beam and set the camera distance so that the beam took up 90% of the screen width.