Replace the lenses of Axis M12-Mount 2.8mm Fixed Lens 10-PackM3905-R and P3905-R Mk III cameras with the M12 Mount 2.8mm Fixed Lens. This lens is IR corrected and has a 107° horizontal angle of view.

For M3905-R & P3905-R Mk III Cameras    M12 Mount    2.8mm Focal Length    107° Horizontal Angle of View    IR Corrected

Related Questions and Answers

Q: 1. Quantity. So, each pack comes with two complete kits? That is two for the back of the speakers, and two for the wall, a total of four pieces. Or is it simple a kit for one speaker?

A: This bracket is for one speaker. However, it is only sold in multiples of two. So you can buy them for 2, 4, 6, 8, etc.

Q: 2. Can the bag for the 3 stand combo fit more than 3 stands?

A: We would only recommend 3 stands, as suggested, for the Three Mic Stands and Cables Kit with Stand Bag.

Q: 3. How do I get this stand to fit with Audio-Technica AT2020USB+ Cardioid Condenser USB Microphone?

A: The Audio-Technica AT2020USB+ Microphone can be attached to the Auray MS-5230F Tripod Microphone Stand with Fixed Boom by using a shockmount such as the Auray SHM-SCM1 Suspension Shockmount for Large Diaphragm Condenser Microphones (B&H # AUSHMSCM1). The shockmount will attach directly to the threads on the end of the mic stand.

Q: 4. Made in?

A: Made in China

Q: 5. How do these compare with their On-Stage counterparts as far as weight, durability, and portability go?

A: The Auray MS-5230F Tripod Microphone Stand with Fixed Boom is made of steel and weighs 4.5 lbs. The On-Stage MS7701B Euro-Boom Mic Stand has a fixed boom, is made of steel, and weighs 5.2 lbs. The height and boom length are similar for both stands. The MS-5230F is height adjustable from 36.2 to 63" and has a boom length of 31.5". The base dimensions are 25.6 x 25.6". The MS7701B is height adjustable from 37 to 64" and has a boom length of 31". Its base dimensions are 23 x 23". For the shorter stands, the Auray MS-5220T Short Tripod Microphone Stand with Telescoping Boom is made of steel and weighs 3.5 lbs. The height is adjustable from 22.1 to 31.5", the base dimensions are 19.7 x 19.7" and the boom extends from 19.3 to 33.9". The On-Stage MS7411TB Kick Drum / Amp Tripod Mic Stand with Boom is made of steel and weighs approximately 4 lbs. The height is adjustable from 17 to 27", the base dimensions are 26 x 26" and the boom extends from 20 to 36". All of the stands adjust and fold up in the same manner.

Q: 6. What would I need to mount Rode Video Mic Pro on this boom stand?

A: The Rode mic has a cold or hot shoe mount. There are a lot of different mounts from B&H, Amazon and ebay that you can look at. For instance, B&H has WindTech CM-58 Hot Shoe to 5/8 -27 Microphone Adapter / WindTech CM-57 Hot Shoe Adapter (Brass) / Audio-Technica AT8469 Camera Shoe Mount to 5/8 -27 and 3/8 -16 Threaded Base Adapter / It looks like it would work fine. Hope this helps, Happy recording!

Q: 7. how long is the cable in relax position?

A: the cable length has not been provided by LanParte

Q: 8. Can a Rode Video Mic Pro be directly attached to the boom pole?

A: You would need a 3/8'' male to 5/8'' female adapter to be able to do that, like B&H # AUAD5838B for example.

Q: 9. Can I use this with a logitech streaming webcam?

A: Some Logitech webcams have 1/4''-20 threading on the bottom like the C922 Pro for example. If your Logitech streaming cam does, then you can use B&H # CAC1361 to mount it to the Auray MS-5230F mic stand.

Q: 10. Will this work with a Sony Alpha 7r 4 camera and a 12v D-tap power supply? Like this one? BH #SHPWRA12F60 Will it drop the 12v voltage to 7.2-8V range that is Sony spec? Thanks, David

A: No it will not. You need a D-tap adapter with the NPFZ100 style dummy battery such as the Kondor Blue D-Tap To Sony a7S III Dummy Battery NP-FZ100 Cable (B&H # KODTSA7SDB MFR # KB-DT-SA7S-DB). The adapter that you have selected is for previous models such as the A7RII