Add personal mixers and compatible stage boxes to your professional audio setup with the Midas HUB4 PRO, a multi-tool in your stage rack that provides analog and digital outputs for various applications. HUB4 PRO features 16 balanced analog outputs, which can supply 4x2 personal stereo mixes from DP48 personal monitor mixers to IEM transmitters.

The HUB4 PRO features Neutrik etherCON AES50 network ports and remote operation via shielded Cat 5e cables, ensuring reliable connections for the transmission of multiple channels in any setting. Its versatile and adaptive power supply can be used globally.

Power up to 4 DP48 Personal Mixers    AES50 In & THRU Ports to Cascade Boxes    48 Bidirectional Channels (48/44.1 kHz)    2 x 24 Channels at 96 kHz    16 Balanced Analog Outputs    8 Personal Stereo Mixes to IEM Tx    Midas DL8 Stage Box Compatibility    StageConnect and AES50    Remote Operation via Cat 5e Cable (330')    Rugged 1 RU Chassis

• Personal monitoring system hub with PoE remote powering for 4 DP48 personal mixers and compatible stage boxes
• AES50 IN and THRU ports for cascading hubs or stage boxes with 48 bidirectional channels at 48/44.1 kHz, or 2 x 24 channels at 96 kHz
• 16 balanced analog outputs, providing 8 personal stereo mixes for IEM transmitters in a side rack
• Channel naming and color properties can be distributed from compatible M32 or HD96 consoles
• 4 Midas DL8 stage boxes can be connected as sub-snakes on stage and powered from ports 1-4
• Personal mix outputs can be monitored via AES50 upstream to connected consoles
• Supports remote control forwarding of a DP48 personal master mixer to another DP48
• Talkback signals from DP48 are summed and sent upstream / downstream on Ch 48
• Front-panel buttons for sending personal mixes to analog outputs as well as for StageConnect and AES50-A upstream
• StageConnect master output with phantom power for connecting with other StageConnect I/O units
• StageConnect is sharing 32-channel audio, 24-bit uncompressed PCM, 44.1/48 kHz, at sub-milisecond latency, over standard XLR or DMX cable (110-ohm recommended)
• Shielded Cat 5e cable max. 250 ft length recommended on all AES50 ports
• Features Neutrik etherCON AES50 network ports
• Rugged 1 RU chassis for durability in portable applications
• Auto-ranging universal switched-mode power supply

HUB4 PRO can supply up to four DP48 personal monitor mixers with PoE (Power over Ethernet) and 48 channels of 24-bit/48 kHz audio or 2 x 24 channels at 96 kHz. HUB4 PRO also collects 48 channels of upstream audio and forwards this audio to the FOH console, either from stage boxes connected to the AES50-B (THRU) Port or 8 return channels from each of Ports 1-4.

• To meet the challenges of large monitoring setups, HUB4 PRO can easily be daisy-chained to make additional DP48 ports available all the way up to symphonic orchestra applications.
• On the other hand, HUB4 PRO can also address situations where you want to connect additional I/O via the same AES50 link to the mixing console. To help build out this AES50 console link, digital stage boxes such as the Midas DL16 or DL32 can be connected to the HUB4’s AES50-B (THRU) Port. The console can pass downstream signals to their respective stage outputs, while also receiving 48 channels upstream from the stage inputs via HUB4.

HUB4 PRO features 16 balanced line-level outputs that can carry the 8 stereo mixes from the connected DP48 mixers for connections in the side rack. There is no need to run additional lines from personal mixers to the transmitters, reducing setup time and reliability considerably. Alternatively, these analog outputs can also be used as spare outputs on stage, receiving signals directly from the FOH consoles, e.g., for providing talkback or side fill outputs.

• HUB4 PRO can convey control messages from M32 FOH consoles to DP48 personal mixers as well as remote control messages between DP48 units.
• Midas DP48 Personal Monitor Mixers support remote control of other DP48 units and can also receive control information from M32 mixing consoles. This M32 control information includes assignments, names, and colors of channels, which are transmitted via AES50 for easy configuration of personal mixers. HUB4 can convey control messages from the FOH console to personal mixers as well as between personal mixers. This control message system works when DP48 units are connected to Ports 1-4 or to the ports on daisy-chained hubs.

HUB4 easily interfaces with the new Midas DL8 stage box, which makes bulky analog sub-snakes a thing of the past. The DL8 stage box can be connected to one of HUB4 ports 1-4 using only a simple Cat 5E STP cable. This cable connection from HUB4 can directly power up to 4 stage boxes via PoE support—IEEE802.3at per port—allowing for shorter analog lines on stage.

The innovative StageConnect interface yields additional flexibility for routing signals in, out, and through the HUB4 PRO. With just one standard XLR cable you can expand the total I/O capacity by 32 channels of lowest latency, impeccable 24-bit audio.

• Connect a Midas DN4816-O for accessing 16 impedance-balanced line signals directly in the side rack, where the IEM transmitters are mounted. 
• Add a DN4816-I for collecting the signals of up to 16 wireless receivers for sending their signals through HUB4 PRO upstream to the mixing console.
• DN4816-U can be used to bridge USB audio with Ultranet and StageConnect in a compact rugged DI box case. Adding convenient and cost-efficient I/O flexibility is now on a level of its own with StageConnect. 

Related Questions and Answers

Q: 1. Can you disable the wifi and just use ethernet?

A: The remote switch selects between Ethernet, WiFi client or Access Point.

Q: 2. Can this work with 5' monitors?

A: While this product is designed to hold a 7" monitor a 5" monitor should work in it as well. It will just be a bit loose as it fits in the case.

Q: 3. Does this unit work with the Midas 32 live?

A: Yes. The Midas DL153 Stagebox is compatible with all Midas digital consoles and audio system engines, as well as with any other AES50-equipped devices.

Q: 4. Though I know it's made for Sony's mobile phones. But I was wondering if it will work with Sony Alpha cameras like the A7 IV?

A: The Sony Vlog Monitor for Xperia PRO-I BH #SOXPROIAD not work with a camera.

Q: 5. Will this kit work with the Sony Xperia I ii ? Is it only specific to the Sony Xperia Pro I ?

A: At this time this Sony Vlog Monitor for Xperia PRO-I, would only be compatible with Xperia PRO-I.

Q: 6. What are the measurements??

A: The SKB 1RMM32-DHW is designed specifically for the Midas M32. SKB offers the Exterior dimensions only. Length: 44.25 in (112.40 cm) Width: 35.75 in (90.81 cm) Depth: 14.75 in (37.47 cm)

Q: 7. Hi ! When you buy the Aquatech pd-65 ! Do u have to purchase this item to work?

A: The only reason you would need the AquaTech P-50Ex 50mm Extension Ring is if you are using one of these lens combinations;Sony E Mount 28mm f/2 + 16mm fisheye conversion lensSony E Mount 28mm f/2 + 21mm wide-angled conversion lens

Q: 8. Can you connect a Midas DL152 to DL151 to make a digital snake?

A: Unfortunately you cannot daisy chain the Midas DL15x series of I O boxes. The DL15x is intended to be directly connected to the Midas DL371 via the AES50 ports. The DL16 and DL32 IO boxes can be daisy-chained when used with the Midas M32 or Behringer X32 consoles. I have attached these various products for clarification purposes. All of which can be found on the B&H website.

Q: 9. So if I'm running a Pro2 at FOH and another Pro2 in MON, I'd need to buy 2 of these to get discrete attenuator control (master/master preamp control) for each console?

A: The DL431 features 3 sets of outputs. The two variable gain preamps are remote controllable from two separate locations, such as front of house and monitor positions. ( rear panel). The front panel is a transformer-isolated split and fixed gain.

Q: 10. Can these be charged with the Frezzi FQC-NP1 Quick Charger for NP-1?

A: Yes, The Frezzi FQC-NP1 Quick Charger for NP-1 can be used with the IDX System Technology NP-9X which is an NP-1 style Li-Ion battery. Charger link - BH #FRFQCNP1 https://bhpho.to/3UHWQBw