The Aputure 5-Pin XLR Male to Male Adapter Kit (Set of 4)from Aputure 5-Pin XLR Male to Male Adapter Kit (Set of 4)packs four 5-pin XLR male to 5-pin XLR male adapters for the separately available Sidus Four. It allows the Sidus Four to receive DMX data.

For Aputure Sidus Four    Includes Four Adapters

Related Questions and Answers

Q: 1. My guess is that you can’t, but is it possible to only buy the phantom power converter?

A: The RODE VXLR+ 3.5mm TRS Female to XLR Male Adapter with Phantom Power Converter adapts an XLR input with phantom power to a 3.5mm input with plugin power. There is no consumer device that does this without any connectors, although some type of OEM circuit may be available from electronics suppliers if you are working on a custom build.

Q: 2. Does it work with handy cam/camcorder's audio input female port ?

A: I DON'T KNOW, HAVEN'T USED IT THAT WAY, ONLY OFF OF LAPTOP

Q: 3. Will this work w/ Sony PXW-Z90V? I dont understand the whole power converter thing

A: Yes the Saramonic C-XLR+ will connect to a mic input on the Sony PXW-Z90V.

Q: 4. Does this work with Sennheiser MKE2 lav mics?

A: Yes, it can work with MKE2 lavalier microphones.

Q: 5. Would it work for SmartLav+ to Zoom H6 XLR inputs?

A: Yes it will but you will need to get an adapter for your SmartLav as the connector on the SmartLav is a TRRS. In order for you to use the XLR Power Converter you will need an adapter to change the lav connector from TRRS to TRS. This is the B&H part number for the adapter B&H#ROSC3. Once your TRRS becomes a TRS them you can use the XLR power converter with the H6.

Q: 6. I want to run my iPhone to our church sound system. Can I use a lightning to 1/8" adaptor and then the Switchcraft 318 to go to xlr and get a good signal?

A: Yes, the Switchcraft AudioStix Stereo 3.5mm Female to Balanced Mono XLR Male Adapter is a good solution for converting a stereo 3.5mm signal connection from an iPhone to mono XLR output for connection to a sound system.

Q: 7. If you have two sources that don't natively balance the signal, do you need a 318 on both ends for it to be balanced?

A: The Switchcraft 318 doesn't work in reverse, so it can't be used at both ends of a signal.

Q: 8. I have a pair of rode videomicros (requires plugin power) and a pair of wireless lavaliers. I will be using them interchangeably depending on the project. I want to get 2 of this item because the videomicro requires power but I need to know if it will still pass the signal without phantom power because the lavaliers don't need plugin power?

A: Yes, this will pass audio without power.

Q: 9. Is the adapter hollow so I can pass a cord through it?

A: The UM99 is not hollow, but you could easily drill a whole through it that would serve your purpose. Jim B.

Q: 10. Would this work for a Sennheiser mic k6/me66 to Sony PCM M10 and give balanced output to both L&R ?

A: Im afraid this will not work at all for what you want to do. As its the other way round. The 3.5mm is the input and the XLR is the mic level output. This would be used in a live situation for example where you may have a device that has a 3.5mm output which you plug in the Switchcraft 318 input. Now you can plug the XLR output of the Switchcraft 318 into a snake or stage box to go into the house mixer at mic level.