You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Nanlite Fc Power Controller For Lighting Systems

Nanlite Fc Power Controller For Lighting Systems
  • Product Code: eq161208
  • Availability: In Stock

$1,197.00 $1,735.65

Power the FC300B, FC500B, or FC500C in the field with this convenient Nanlite FC Power Controller for Lighting Systemsfrom Nanlite. The controller features two V-mount battery plates to support separately available 14.4-14.8V and 26V V-mount batteries, while offering a 2" screen with local knobs and buttons for easy control. The controller connects to the LED spotlight over an included 9.8' long cable. You can also plug the controller into an AC outlet to control the light when the batteries are not being used. Additionally, the FC controller also gives you the possibility of charging the attached V-mount batteries.

For FC300B, FC500B & FC500C LEDs    Two V-Mount Battery Plates    Charges Optional V-mount Batteries    2" Screen & Local Controls    Built-In Strap    Includes 9.8' Long Cable

Connections
Total Outlets1 x Proprietary
Power
Dimming0 to 100%
Input Power14.4 to 26 VDC
General
Battery MountV-Mount
Display TypeLCD
Dimensions8.05 x 5.3 x 5" / 20.45 x 13.5 x 12.7 cm
Cable Length9.8' / 3 m
Weight3.6 lb / 1.6 kg
Environmental ResistanceNo
Packaging Info
Package Weight5.215 lb
Box Dimensions (LxWxH)12.2 x 7.5 x 7"

  • Operates the light from a distance
  • A built-in strap allows you to hang it on a light stand
  • Back mounting plate works with the separately available ASCPQRFZ super clamp

Related Questions and Answers

Q: 1. Is this a charger too?

A: Yes, Nanlite Power Adapter for Pavotube 15C is a charger and will provide AC power.

Q: 2. Will this work with the AKG WMS45 receiver?

A: Yes this AC adapter will work with an AKG WMS45 receiver.

Q: 3. Will this work with 2 Wire and 4 Wire Clearcom systems?

A: The Eartec HUB Interface for ClearCom Systems (BH # EAHUBINCC) works with ClearCom 2-wire and 4-wire systems.

Q: 4. Is this unit compatible with the E-M1 Mk III unit?

A: The FC-WR is not compatible with the OM-D E-M1 Mark III.

Q: 5. Is this transmitter working on Panasonic GH5 to command an Olympus FR-WR Wireless Radio Flash Receiver bundled with Olympus FL-900R?

A: NO The FC-WR Flash Comander is not compatible with the GH-5. Since this model camera was released long before the FC-WR and FR-WR it would require a Firmware update for the GH5

Q: 6. Just to confirm this is for all broncolor softboxes ie octa / strip / square shaped ones?

A: Yes, it works for all Broncolor boxes.

Q: 7. Will this work with balackmagic atem talk back converter systems as well?

A: No, the Eartec HUB Interface for Clear-Com Intercom will not work because this adapter is made to interface with Clear-Com systems.

Q: 8. What's the outer diameter of the insert? Is it interchangeable with insert for other mount?

A: The outer diameter is 8 inches. Not sure about the second part of your question

Q: 9. Will this work with RTS intercom systems as well?

A: There is a version (BH #EAHUBINRTS) available for RTS intercom systems: https://bhpho.to/3X0FKPs

Q: 10. I have the 4 pack eartec headsets, that work with master headset and 3 slaves. For the hub interface to clearcom, will I also need to buy the Hub? So will I need both the hub and hub interface?

A: Yes, you will need to use the HUB (B&H # EAHUB) and the HUB interface together. The HUB works in the same manner as the master headset you already have, so it replaces the master headset. The HUB can be used with eight wireless UltraLite remote headsets and one wired headset.

27/09/2024

[0 to 100%] Screwed it in and off we go to the Wedding ceremony. It worked perfectly 10 hours straight. Great product. Highly recommended.

5
26/09/2024

[5.215 lb] Love what it does, when once your done with getting the system
properly configured.


Documentation is limited, but plenty of videos exists on SoundSwitch
site and Utube. Please watch all before starting.


Be patient with support from New Zealand via email. Their support
staff is top notch. If they have to look at your system over the internet they will to correct setup problems. May require more than
one view.


Watching support configure setup problem I say the following.
Top notch professional support stay. These guys get 5 Stars also.
These guys ROCK.


Regards


DJ Steve

5
24/09/2024

[0 to 100%] Its the this juice goose in our set up. Wonderful to have a clean location plug things in to on a rack. All three are great.

5
22/09/2024

[5.215 lb] i bought this piece of power control gear to control my music studio from my desk, and it was replacing an ADJ unit of similar build. this one comes with an outlet on the front and two USB charging ports which makes it more convenient than the already great ADJ unit. would highly recommend, and the blue is really easy on the eyes :)

5
18/09/2024

[V-Mount] We got several of these for our Mac clients on a StorNext fiber SAN.� Using on iMacs, MacBook Pros and a couple Mac Pro trashcans, all on Sierra.� They hooked up great, nothing to it really.� Installed the driver and a service for Atto's Config Tool for remote management.� There you can monitor and update drivers and firmware when needed.
Our iMacs still had Tbolt2, but Apple's 2-3 adapter works fine.� The Thunderbolt pass-through has been handy sometimes too.
Really never had to think about it much, just hookup, install, move on.� Never seen a failure.

5
03/08/2024

[LCD] I'd bought a two pack of Pavotube 30c's which included one adapter (and a cable to connect the two), but I wanted to leave both always plugged into power, and they were too far apart to keep connected. Enter in this power adapter! It's just like the one that came in the box, and it works great. Not much else to say!

5
25/07/2024

[LCD] The ALTRONIX StrikeIt2 was exactly what we needed for our Door Access system. The box is just the right size for the board and an eventual battery. B&h was able to ship this to us next day, to help with a critical project.

5
25/07/2024

[LCD] I've always preferred eyecups to the original viewfinder rings. This is a perfect fit for my Zfc and is a nice addition. The swing out screen slightly touches the rubber as you open it out but it is not a problem and doesn't interfere with proper usage.

5
14/07/2024

[1 x Proprietary] I use this in my band it has a setting so it will run its self Chauvet make a good solid product. It depends on the lights you get so there maybe a learning curve.

5
09/07/2024

[1 x Proprietary] Blackmagic does NOT provide power switches on their switchers, recorders and routers. Individual switches allows rebooting of a single unit during a live show without needing to crash your whole rack. The USB jacks are helpful too.

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Kramer Fc-22eth 2-port Ethernet Controller

$780.00 $1,232.40

Nanlite Lighting Kit Bundle Of Joy

$1,139.61 $1,595.45

Nanlite Forza 60 Softbox Lighting Kit

$357.00 $553.35

Celestron Smart Dewheater Power Controller 4x

$1,199.97 $1,607.96

Elation Midicon Lighting Midi Controller

$3,749.79 $4,762.23

Smith-victor Dmx-512-8 Lighting Controller

$509.85 $734.18

Altronix 8-output Power Controller

$223.02 $269.85

Nanlite Power Adapter For Pavotube 15c

$90.00 $128.70

Enttec S-play Mini Controller For Dmx Lighting

$1,140.00 $1,789.80

Products You May Like

K&m 18930 X Style Keyboard Stand (black)

$284.97 $447.40

Schneider 6.6x6.6 Radiant Soft 1/4 Filter

$1,603.80 $2,517.97

Hp 910xl Cyan Ink Cartridge High-capacity

$77.97 $120.85

Behringer X32 Compact Case

$1,019.85 $1,254.42

Vizrt Viz Libero Go Software For Broadcast

$29,988.00 $38,684.52

Heden Drive Gear For M26ve Motors 0.4 Mod

$270.00 $394.20

Smart-avi Mu-88 8x8 Usb 2.0 Matrix Switch

$8,794.35 $12,136.20

Toa A-906mk2 60w 8-channel Mixer Amplifier

$2,151.00 $2,581.20