The Verkada ACC-POE-90W-AU Indoor 90W PoE++ Injector Australiafrom Verkada ACC-POE-90W-AU Indoor 90W PoE++ Injector Australiais designed to power devices like the GC31-E Outdoor Cellular Gateway. Built for indoor use, this injector delivers up to 90W of PoE. It complies with 802.3bt type 4 standard and supports 1 Gb/s passthrough data rates. Built-in screw tabs enable wall mounting. This unit needs to be placed inside a NEMA enclosure (available separately) when used in an outdoor application.

Delivers 90W Power over Ethernet    Powers GC31-E Outdoor Cellular Gateway    Australia Type I Plug    802.3bt Type 4 Standard    1 Gb/s Passthrough Data Rates    Wall Mountable

Related Questions and Answers

Q: 1. Can an equalizer be used at the recorder input/output connections?

A: To be able to connect an equalizer into the Denon PMA-600NE, it would need to start with your source device, going into the EQ and then outputting to one of the inputs on the Denon PMA-600NE.

Q: 2. To use the sdi output is the power supply necessary? Or only with power supply via PoE

A: You should be able to use the SDI output however you power this unit.

Q: 3. Do i need a cord for this to contect to my camera?

A: Yes, the KF2U 2-Light 90W/s Thrifty Location Kit comes with a sync cable to connect with cameras that have a sync terminal for flash.

Q: 4. does it work with the Asus VivoBook S15 S510UA-DS51 Notebook?

A: The universal power adapter is made to work with most notebooks and should be compatible with your ASUS.

Q: 5. Can you live stream to youtube with this camera?

A: Yes, this has an IP Streaming Output which you can use to stream to Youtube.

Q: 6. I have the 4D Controller and the old AV-1081 (RS232 in only) if I buy this AV-1281 (RS232 in/out) can I control both Cameras?

A: Yes, the Avipas 4D controller supports - IP & Serial RS-232/422/485 Communication. Yes it should allow you to control IP Network cameras and RS-232 cameras simultaneously.

Q: 7. Is it possible to plug this into a PC?

A: Yes you can connect the Denon PMA-600NE 90W Stereo Integrated Amplifier to a PC either using a cable from the headphone output on your PC, into one of the stereo RCA inputs like B&H # KOSMYCM2RM10 or you can use a USB audio interface from the computer like B&H # ESU24XL with B&H # HO2PM2RM9.

Q: 8. Can this camera be powered over it's Ethernet port?

A: yes this is a POE ptz and hence can be powered via POE (power over ethernet)

Q: 9. As this camera has PoE, is it possible for a single ethernet CAT6 cable to power the camera, receive video data with IP streaming into a software such as OBS, as well as receive camera control data from a joystick controller like the AV-3102, which would be plugged into another port on the ethernet switch? Is that the correct set up and can a single Cat6 cable handle all 3 of those functions? Thanks!

A: yes a single cat cable can handle this as long as you are using IP video. you will need a POE switch to provide power to the camera.

Q: 10. Documentation says supports playing from sources with a MM cartridge... I assume it works fine with Moving Coil?

A: While it may be possible to use Moving Coil with the Denon PMA-600NE 90W Stereo Integrated Amplifier, it is not recommended. A better option would be the Denon PMA-900HNE 100W Integrated Network Amplifier which is specifically designed for this, BH #DEMA900HNE (https://bhpho.to/3PNxkrz).