The Teledyne Flir Blackfly S USB3 5MP Color Camera C Mountfrom Teledyne Flir Blackfly S USB3 5MP Color Camera C Mountcaptures up to 2448 x 2048 resolution video and offers micro-USB 3.1 Gen 1 output. Maximum standard frame rate is 35 fps. Featuring a compact form factor, the high-performance camera is designed for industrial machine vision applications and meets the USB3 Vision v1.0 standard. A C lens mount provides support for a wide variety of varifocal and fixed focal length lenses.

Features include a Sony IMX264 2/3" CMOS color sensor, two custom user settings, manual/auto gain and white balance, and a global shutter. You can power the camera using a 6-pin Hirose power source or via the USB port.

Up to 2448 x 2048 Capture Resolution    35 fps Standard Frame Rate    Micro-USB 3.1 Gen 1 Output    C Lens Mount    Power via USB or 6-Pin Hirose    5MP 2/3" CMOS Sensor, Global Shutter    USB3 Vision v1.0 Machine Vision Standard

• Acquisition modes: Continuous / Single Frame / Multi Frame
• Exposure control: hardware trigger, programmable via camera API, automatic
• Exposure range: 13 µs to 30 seconds
• Flash memory: 6MB non-volatile memory
• Gain control: manual, automatic (AGC)
• Image buffer: 240MB
• Image processing: color correction matrix, gamma, lookup table, saturation, and sharpness
• Partial image modes: pixel binning, decimation, ROI
• User sets: two user configuration sets for custom camera settings
• White balance: manual, automatic (AWB)

• Absolute sensitivity threshold (y): 4.67
• Dynamic range: 71.92 dB
• Gain range: 0 to 47 dB
• Quantum efficiency blue: 48.21 at 460nm
• Quantum efficiency green: 58.3 at 530nm
• Quantum efficiency red: 45.94 at 625nm
• Saturation capacity (e-): 10740
• Temporal dark noise (read noise): 2.22

Related Questions and Answers

Q: 1. Can BOTH the daylight- and incandescent-color LEDs be turned on to full brightness at the same time for more light output overall?

A: Yes, that is possible.

Q: 2. Whats the CRI of this light ... find it weird its not listed on such a good light?

A: The Brick CRI is high for sure - CRi rating is unknown (call LitePanel). However I have the Bolt (CRI 91) and VidPro 330x (CRI 90) and the Brick is closer to true tungsten than the former two.

Q: 3. On the lowest setting, what is the Lux level?

A: unfortunately that information is Not provided by the manufacturer

Q: 4. Does this card come with a low profile bracket?

A: No, the Sonnet USB3-4PM-E Allegro 4-Port USB 3.2 Gen 1 PCI Express Card BH #SOUSB34PME does not come with a low profile bracket.

Q: 5. how much watt usage for this card?

A: I do not know the answer to that question, as I have an 1150 watt power supply, and simply never was concerned.

Q: 6. Will this card work on PCI Express 1.0?

A: You can but it is not recommended as there may be a performance hit.

Q: 7. Are these water-resistant?

A: no it is Not

Q: 8. What does the light itself measure? Height, Width, Depth?

A: The GVM-5S Variable Color On-Camera LED Light would measure 4.8 x 3.1 x 1.2".

Q: 9. Do the four ports share a 5 Gb/s bandwidth, so the more devices you connect, the slower each runs? Or, does each port have a dedicated 5 Gb/s bandwidth?

A: They do not share a 5 Gb/s bandwidth. Each port has a dedicated 5 Gb/s bandwidth.

Q: 10. Would this work on an Xserve 2,1?

A: not sure - sorry -the only problem I have it doesn't power every external usb 3.0 or 2.0 bus powered drive. media transfer stops half way through. I find that the new thunderbolt bus powered external drives with 3.0 connections do transfer media fine.