Parasound 2125V2 2-Channel Power Amplifier

Parasound 2125v2 2-channel Power Amplifier

Product Code: eq162541
Availability: In Stock

$2,997.00 $4,615.38

Qty

11 reviews Write a review

Description
Reviews (11)

Get THX certified power for your custom home theater installation with the New Classic 2125v2 2-Channel Power Amplifier from Parasound. The 2125v2 is a Class-AB amplifier, capable of delivering 150 watts per channel into 8 Ω with two channels driven, or up to 400 watts in bridged mono mode.

The straightforward design features gold-plated connectors with a stereo RCA line input and loop-through output as well as four binding post terminal pairs for stereo or bridged mono speaker output. You can run speakers A, speakers B, or both, and the selection buttons on the front can be locked out on the rear panel to avoid accidental switching. Additionally, power on and off can be set to automatic signal sensing or 12V trigger options.

2-Channel Stereo Configuration 150W at 8 Ω, 225W at 4 Ω Speaker A / Speaker B Outputs Normal Stereo & Bridged Mono Modes Switchable 20/40 Hz High-Pass Filter 35 Amps Peak Current per Channel 2 Ω Stable Operation w/ Selector Switch Auto On/Off Capability High-Current Toroidal Transformer 115/230V Selector Switch on Rear Panel

Key Specs
Channels	2.0
Power Output per Channel	2-Channel Driven: 150 W at 8 Ohms 225 W at 4 Ohms
Rear A/V Outputs	1x Stereo RCA
Speaker I/O	2x Gold-Plated Binding Post Pairs
Wi-Fi	No
Bluetooth	No
Amplifier
Amplifier Type	Power Amplifier
Channels	2.0
Amplifier Class	Class-AB
Power Output per Channel	2-Channel Driven: 150 W at 8 Ohms 225 W at 4 Ohms
Frequency Response	20 Hz to 50 kHz ±3 dB (1 W)
THD	0.25% (Full Power)
Speaker Impedance	2 to 8 Ohms
Tone Control	No
Damping Factor	> 150 (20 Hz to 20 kHz)
Supported Sample Rates	No
Connectivity
Rear A/V Inputs	1x Stereo RCA
Rear A/V Outputs	1x Stereo RCA
Front I/O	No
Other Rear I/O	1x 1/8" / 3.5 mm (12 V Trigger) Input 1x 1/8" / 3.5 mm (12 V Trigger) Output
Speaker I/O	2x Gold-Plated Binding Post Pairs
HDCP Support	No
Media Card Slot	No
A/B Speaker Selection	Yes
Bi-Amp Capability	No
Input Impedance	33 Kilohms
Input Sensitivity	1 V
Signal to Noise Ratio	114 dB (A-Weighted / Rated Output) 106 dB (Rated Output / Unweighted)
Crosstalk	85 dB (1 kHz) 73 dB (10 kHz) 67 dB (20 kHz)
Wi-Fi	No
Bluetooth	No
Control
Mobile App Compatible	No
Power
Input Power	110 to 240 VAC, 50 / 60 Hz
Power Consumption	Maximum: 550 W No Sound: 32 W
Physical
Dimensions (W x H x D)	17.2 x 4.2 x 16.0" / 437.0 x 107.0 x 406.0 mm (including Protrusions, with Feet)
Weight	27.1 lb / 12.3 kg
Packaging Info
Package Weight	31.855 lb
Box Dimensions (LxWxH)	21.8 x 19.8 x 9.3"

THX Ultra2 certified for reference home theater sound
High-current toroidal transformer
Switchable high pass filter: off / 20 / 40 Hz
Rear panel right and left gain knobs
Impedance switch: 2-3 ohms / 4-8 ohms
Detachable power cord
Rack mountable with separately available kit: RMK22 kit

Related Questions and Answers

Q: 1. how many speaker loads in 8 ohms 15 inches diameter

A: The amp is rated at 4 ohms for 2 speakers. So at 8 ohms you can hook up 1 speaker.

Q: 2. Is that 775watts at hz or khz?

A: Neither. The power rating for an amplifier is not related to the frequency response. The 775 Watt power rating for the Crown XLS 2502 Stereo Power Amplifier is for each channel when the amp is operating at 4 Ohms. This means the amp will deliver 775 Watts to each channel to drive a 4 Ohm speaker. The maximum power the amp can output will vary depending on the impedance of the speakers that are connected. With an 8 Ohm speaker the amp delivers 440 Watts per channel and with a 2 Ohm speaker the amp delivers 1200 Watts per channel. When speakers with lower impedance ratings are use the amp will deliver higher amounts of power.

Q: 3. What speakers are recommened withthis amp?

A: You can use a 100 WATS SPEAKERS

Q: 4. what are the difference between 2 amp. Gli pro pvx9000 and Gli pvx9000 equalizer?

A: An equalizer does not provide any amplification.

Q: 5. HOW MANY WATCH IN 8 OHMS LOAD AND 4 OHMS LOAD?

A: The Gli pro PVX-9000 will be about 350 Watts at 8 ohms and about 500 watts at 4 ohms.

Q: 6. Can I run the output into an unbalanced recorder?

A: No problem - just adapt the XLR output from the ROLLS to the required input on your recorder.

Q: 7. Is there a remote for this?

A: No, there is not a remote made for use with the Pyle Pro PTA4 Mini 2 x 120 Watt Stereo Power Amplifier w/ AUX/CD Input.

Q: 8. Can I connect this to 2 bookshelf speakers (KD-51M) and my computer with a 3.5mm to RCA cable?

A: The Pyle Pro PTA4 Mini 2 x 120 Watt Stereo Power Amplifier w/ AUX/CD Input (BH # PYPTA4) will connect to most computers with a 3.5mm audio output via an RCA "Y" cable: Comprehensive 10' Stereo 3.5mm Male to Dual RCA Male Y-Cable (B&H # COMPS2PP10ST): https://bhpho.to/4a7ArnO

Q: 9. How long do the batteries last?

A: Our customers report 2 to 4 hours continuously depending upon the microphones used.

Q: 10. Is the van speed variable and quiet at low speed.

A: The fan is fairly quiet...it speeds up to cool down as needed depending on output of power being used.

kanu42	18/09/2024
[2.0] Great amplifier for both music and movies. Sound is clean with great midrange. 5

Vette	02/09/2024
[1x Stereo RCA] Excellent build and quality. As expected from a Marantz product. 5

Stephen	21/08/2024
[33 Kilohms ] My center channel and two tower speakers were starved for power before this. Now there is more than enough power and the sound coming from center and front speakers sounds great 5

Blue room	14/08/2024
[2.0] In today’s immersive sound world i.e. Atmos, DTS:X and Auro-3D, the MM8077 is a perfect product for your amplifier needs. I’m very happy with this product. 5

Robert F	26/07/2024
[1x Stereo RCA] Solid amp with XLR inputs. High quality. Integrates nicely with Pre-amp 5

Philip B	17/07/2024
[2 to 8 Ohms] Worked great so far. Sound is more analog than expected 5

Steve G	22/06/2024
[1 V] Quality and performance, I have never had a problem with this unit. I have it paired with a Marantz AV7702 and I use them for audio only the sound quality is excellent. It works great as a multi zone system. I had a Carver system for years and the difference in the sound quality was apparent the first time I listened to this unit. I love it! 5

Henry	25/04/2024
[31.855 lb] Great sound and quick response. Its a beautiful match to its sister pre-amps (mine is the AV7702MKII). I mostly listen to stereo music, but with the 7 channel amp, it can be excellent home theater. 5

Duke	07/04/2024
[33 Kilohms ] Great unit. I’m very happy with it. I’m running energy connoisseur speakers 5.1 system. Should I get the MM7055? 5

Chris	02/04/2024
[Yes] I read a long time about various multi channel amps before purchasing the Marantz 8077 and matching preamp. I'm beyond pleased with the clean, crisp power coupled up with my SVS Ultra speaker system!! Very satisfied especial in the price! 5