Split the output port of your Blink 500 T4 receiver to four different audio sources using the Saramonic SR-C2026 TRRRS to Quad XLR Cable for Wireless Receiversfrom Saramonic. The male 3.5mm TRRRS connector on one end of the cable inserts into the Blink 500 T4 receiver. The opposite end of the cable features four male 3-pin XLR connectors, which can insert into various audio recorders of your choice. It measures 2' in total length for efficient cable runs.

For Blink 500 T4 System    One Male 3.5mm TRRRS Connector    Four Male 3-Pin XLR Connectors    2' Total Cable Length

Related Questions and Answers

Q: 1. is it compatible with saramonic blink 500 pro?

A: Yes you can use the Saramonic SR-UM10-C35XLR with the Saramonic Blink 500 Pro receiver.

Q: 2. Is this adapter cable compatible with any XLR microphone?

A: No . It is compatible withe listed Saramonic products.

Q: 3. Would this cable provide separate tracks out of the UwMic9, or will it be both channels mixed into both XLR’s?

A: Both channels would be mixed on both XLRs because all of the audio from both microphones is coming from a single output on the Saramonic RX9 receiver.

Q: 4. Does this support stereo audio input?

A: No, it does not.\

Q: 5. Bidirectional signal? Will it work with AirPods max? If it has an analog to digital converter to use on an airplane. (Audio output from 3.5mm input to lightning)

A: The Saramonic SR-C2002 3.5mm TRRS Female to Lightning Adapter Cable for Audio to/from iPhone is compatible for bidirectional use with TRRS-wired headsets and headphones. The Apple Airpods Max use a USB Type-C connection and further adaptation may inhibit the capabilities of the adapter or headphones.

Q: 6. If perhaps I want to go on musical Facebook live, can I use this chord and pick all my audio from the mixer directly and the output on Facebook page will be as neat and the output from the speakers?

A: No. The Saramonic SR-C2002 3.5mm TRRS Female to Lightning Adapter Cable for Audio to/from iPhone is intended for use with a microphone or a mic level signal. The output signal from a mixer is line level which is much louder than mic level, so you will need to use an attenuator or level matching cable between the mixer and Saramonic Lightning adapter in order to pad the line level signal from the mixer and bring it down to mic level if you want to connect it to an iPhone. If your mixer has XLR outputs, you can use a cable like the Sescom Dual Female XLR to 3.5mm TRRS Plug - Line to Mic Level Summing Cable for Mobile Devices - 12" (B&H # SEIPSUMXLR12). If your mixer has RCA outputs, you can use the Sescom Stereo RCA to 3.5mm TRRS Plug Line to Mic Level Summing Cable for Mobile Devices - 12" (B&H # SEIPSUMRCA12). If your mixer has 1/4" output, you can use the Sescom Dual 1/4" Phone Plug to 3.5mm TRRS Plug Line to Microphone Summing Cable - 3' (B&H # SEIPSUMTS3). Please feel free to contact us by phone or through live chat if you have additional questions or if you would like further assistance.

Q: 7. Can this be used with Apple Airpods Max headset lightning port to connect to 3.5mm TRRS mic+audio to/from a PC?

A: While it has the desired connectivity, the Saramonic SR-C2002 3.5mm TRRS Female to Lightning Adapter Cable for Audio to/from iPhone is not specified for this specific use with the Apple Airpods Max and PC connection, and may or may not work as desired.

Q: 8. Since it's TRS will it work with a low impedance microphone?

A: The Saramonic SR-UC201 3.5mm TRS Female to 3.5mm TRRS Male Adapter Cable for Smartphones should accept a low-impedance TRS microphone signal.

Q: 9. Will this work with a Sennheiser MKE 440 stereo microphone? If not, do you sell one that will?

A: No, the Saramonic SR-C2002 3.5mm TRRS Female to Lightning Adapter Cable for Audio to/from iPhone (3") BH #SASRC2002 is not compatible with the Sennheiser MKE 440. You can make it work in stereo by using the Saramonic LC-C35 Locking 3.5mm Connector to Apple-Certified Lightning Output Cable BH #SALCC35 along with the Hosa Technology GMM303 3.5mm Female Stereo Mini to 3.5mm Female Stereo Mini Adapter BH #HOASMFSMF.

Q: 10. Will this cord allow use of both ends of the V-Mic D4 Duo with an iPhone?

A: No, you will need a few adapters to make Deity work with iphone below are the items you need: https://www.bhphotovideo.com/c/product/1561511-REG/saramonic_sr_c2002_apple_lightning_connector.html https://www.bhphotovideo.com/c/product/1048151-REG/rode_sc4_trs_to_trrs_adaptor.html