Achieve smooth sliding shots using this MOVMAX Slider Elite 100mm Bowl Mount 35.4"and its 35.4" long, heavy-duty aluminum rails. The friction-based sliding system provides smooth, quiet sliding shots with manual operation. Two light stand adapters with 5/8" receivers are included for mounting the slider on light stands or C-stands. The integrated tracking carriage features a 100mm bowl mount for securing most camera configurations with a 100mm half ball fluid head. And taking the system on the go is a breeze, thanks to the included carry case.

35.4" Aluminum Slider    Smooth, Friction-Based Sliding System    Tracking Carriage with 100mm Bowl Mount    55 lb Maximum Load Capacity    Brake and Damper Control Knobs    Includes Two Light Stand Adapters    Carry Case for Transport

Related Questions and Answers

Q: 1. Since the product page showed only one product picture, I saw a big hole in the middle, and there's no way to know about the constructure.After buying this(not yet), what else should I buy to make a whole camera-supporting system?Thanks.

A: This is designed to be used with either a 100mm or 75mm fluid ball head (there's an adapter so the 75mm head will work).

Q: 2. How is this different from the v1 connector?

A: The V1 uses a red retainer that slides in place to secure the pin in place.

Q: 3. How similar is this to the Manfrotto 536? Could this support the Edelkrone JibONE ?

A: There are many similarities but also many differences. The Manfrotto is considerably taller when opened to max height; it handles less weight than the Benro; and it weighs a little less. But the Benro will be able to handle the Edelkrone JibONE.

Q: 4. Can I use this with the 100mm bowl on my Proaim Polaris dolly?

A: Yes, you can use the Sachtler aktiv Bowl Connector (100mm) with the 100mm bowl on the Proaim Polaris Dolly.

Q: 5. Are there mounting holes for a Mounting Board?

A: Yes. If you rotate the red feet there is a hole.

Q: 6. Can I use this for my MYT works Medium slider?

A: Yes. When equipped with the correct HI-HAT 100mm, 150mm, 75mm, Flat Mount, Mitchell Tray.

Q: 7. Does the backpack style bag it comes with have room for both the sticks & standard 100mm head? Or does it hold the legs alone?

A: Yes, this bag should be able to hold the tripod with a head installed. It will just depend on the size of the head used. According to Benro the included bag will give you a total of around 36 inches of clearance. This tripod has a folded length of around 28 inches, meaning you will have another 8 inches or so left within the bag for a tripod head.

Q: 8. Will this work with Enduro or Gitzo 4 Series tripods?

A: Yes. The following tripod must have a 75mm bowl dropping to go to 100mm Bowl.

Q: 9. Does anyone has experience using this tripod with Manfrotto 500BALLSH (100mm half-ball, short handle) part #MA500BSH? My concern is that Benro 100HB 100mm half-ball part #BEBL100 has a longer handle. Could not find the handle length info.

A: The Manfrotto 500BALLSH 100mm Half-Ball with Short Locking Handle will work fine with this tripod, BH #MA500BSH. https://bhpho.to/3sGhKmM

Q: 10. is this compatible with the dana dolly 100mm bowl or is it required to get the dana dolly bowl adapter as well?

A: Yes. The following unit will accommodate all 100mm Bowl Tripod or Support.