Capture professional HD video for your video conferencing, education, house of worship, or other video application with this white Bolin N2-210XW NDI|HX3 PTZ Camera Whitefrom Bolin Technology. This remotely controllable PTZ camera features a webcam-style housing, and it allows you to capture up to 1080p60 resolution video and output via HDMI, USB-C 2.0, NDI|HX3, or IP streaming via its RJ45 Ethernet interface. Additional features include a 10x optical zoom, an additional 16x digital zoom, a 68.8° angle of view, a ±170° panning range, a +90 to -30° tilting range, auto or manual focus, a wide dynamic range, and serial/IP control. It also features a 3.5mm mic/line input and a durable aluminum housing.

The low-noise 1/2.8" 2.13MP CMOS sensor ensures a high signal-to-noise ratio, while the advanced 2D/3D noise-reduction technology further reduces image noise, so a sharp image is delivered in low light. The RJ45 Ethernet port allows you to control and configure the camera via IP, and it also allows simultaneous dual streaming via IP for a live internet stream. You can also output the video via USB with UVC support, making it easy to interface with a computer to send video and audio to a streaming or recording application. There is also an audio line input on the back to input stereo audio into your streams and video output.

The pan/tilt/zoom mechanism uses quiet, smooth movements, controllable using the included IR remote controller, ONVIF and VISCA-over-IP control, or the RS-232 input/outputs that support VISCA, Pelco-D, and Pelco-P protocols for use with a separately available controller. You can store up to 255 preset positions using an optional serial controller, or store six presets when using the included IR remote. You can power the camera using a networked PoE (Power-over-Ethernet) switch or the included power adapter. The camera also includes an RS-232 control cable.

Output via USB-C, NDI|HX3, IP, or HDMI    10x Optical Zoom, 16x Digital Zoom    Up to 1080p60 Full HD Output    1/2.8" 2.13MP CMOS Sensor    IP & Serial Control via VISCA, Pelco-P/D    PoE+ Support, 68.8° Field of View    H.264/AAC-LC, UVC, UAC Support    Lightweight Aluminum/Magnesium Housing

This Bolin NDI|HX3 N2 PTZ camera is equipped with a 1/2.8" CMOS sensor to provide high-quality images in 1080p60 resolutions with 10x optical zoom. The camera comes in a white color.

Related Questions and Answers

Q: 1. Can a button be programmed to both change the input source (i.e. camera) and issue a preset with one press?

A: The PTZCam Switch N8 8-Channel NDI Switcher and PTZ Controller (B&H# PTZCSWITCHN8) can have a button programmed by using a preset to both switch to a certain source and switch to a certain color temperature for that source.

Q: 2. is the Canon cr-n500 dual voltage?

A: The Canon CRN-500 can be powered via: PoE: 19.6 W Power Supply: 24 VDC 18.6 W

Q: 3. Is it compatible with Canon CR-N300 ?

A: Yes, PTZcam has tested other NDI HX2 cameras like the Canon CR-N300 with the PTZCam Switch N8 8-Channel NDI Switcher and PTZ Controller, and they work perfectly with the switcher.

Q: 4. how does one control which camera the PTZ presets affect?

A: The preset will affect the camera that is selected on screen.

Q: 5. Is it possible to use FULL NDI ? (or NDI/HX only ?)

A: Yes. the following unit does support Built-In NDI|HX. And can be driven over POE+.

Q: 6. Does it provide PoE to the camera?

A: No, this does not have PoE to the camera.

Q: 7. Will I be able to get a good close-up shot on a subject 60 feet away with this camera?

A: At 60 feet the optical zoom is just short of creating a proper close up (it would create more of a medium shot). You will need to use the digital zoom to get a true close up.

Q: 8. Does the USB port output power?

A: No, you can't get power through the USB port on the Canon CR-N500 (BH #CAPTZCRN500), only data.

Q: 9. Does this have chroma capabilities?

A: The PTZCam Switch N8 does not have a built in chromakey. However you can overlay logo graphics.

Q: 10. Will I be able to convert the 4K HDMI output of this camera to SDI using the Blackmagic Design HDMI to SDI 6G Mini Converter, transmit it over a 6G-SDI rated coax cable and then convert it back to HDMI using the Blackmagic Design SDI to HDMI 6G Mini Converter and finally get it into a 4K video switcher like RGBlink mini-pro Dual-Channel 4K Video Switcher, still in 4K?

A: Yes, Using HDMI to SDI and SDI to HDMI converters would allow you to output in 4k and send the 4k signal to a switcher. Here are 12G models that support up to 4k 60p HDMI to SDI12G https://bhpho.to/3Gx0UNz and SDI 12G to HDMI https://bhpho.to/327yWJn. Not that the converters would also work with 6G cables and signals.