Mount your wireless focus control system onto your camera rig using this SmallRig MagicFIZ Wireless Follow Focus Handgrip Kitfrom SmallRig. The kit includes a focus controller module, wireless handgrip, handgrip adapter, and USB-C cable. The handgrip allows you to control start/stop on your camera using an optional cable, and it mounts onto your rig for either right- or left-hand configurations using the included handgrip adapter.

The handgrip is powered using a separately available LP-E6 battery, and it can also power the separately available focus receiver motor using a USB-C cable. Other features include a power-failure memory to prevent repeat calibration, optional wired operation, AB point settings, and a low-power 0.96" OLED display.

Electronic Controller Module & Motor    Control Handgrip & Handgrip Adapter    15mm Rod Clamp, 15mm Rod, NATO Rail    2 x Follow Focus Gear Rings, USB-C Cable    L-Series Battery Plate, Carry Bag

Supports follow focus/recording/power supply

Low-latency and high-precision wireless/cabled control

Power-failure memory; no need for repeated calibration

Suitable for both right hand and left hands; easy to install

Related Questions and Answers

Q: 1. is there an option to control zoom enterv betw 2 points,like to zoom from A to B in 5 sec Automatically & save it to my settings

A: While the SmallRig MagicFIZ Wireless Follow Focus Two-Motor Kit does allow users to save an A and B position, it does not operators to set a focus pull from one point to the other in a set amount of time.

Q: 2. I want to use the focus ring on the left side, but the display is upside down. Is there a way to flip the display?

A: On the SmallRig MagicFIZ Wireless Follow Focus Basic Kit, press and hold the SET button, and then select SCREEN to toggle screen inversion.

Q: 3. Which Rosette mount can be used for the grip?

A: SmallRig MagicFIZ Wireless Follow Focus Handgrip Kit comes with a 3/8-16 to nato clam adaptor only (hand grip adapter). The shoulder rig adapter which is the dedicated rossette adapter for this unit only comes with the SmallRig MagicFIZ Wireless Follow Focus Two-Motor Kit. Unfortunately this unit is not provide by SmallRig as individual parts. You could use other similar parts bu the connection is not as solid as the Smallrig shoulder rig adapter.

Q: 4. Is there a delay between focus wheel movement and motor movement at the lens?

A: The SmallRig MagicFIZ Wireless Follow Focus has been designed to ensure a minimal latency of 50ms or less.

Q: 5. Where do I find the optional cable for controlling Start/Stop, and what cameras will it support?

A: The optional cable will depend on the model of camera that you have but they are typically some form of USB-C to some other USB connection. For instance, the recommended cable for connecting the SmallRig MagicFIZ Wireless Follow Focus Handgrip Kit to a Sony is the SmallRig USB Type-C to Sony Multi-Terminal Control Cable for Top Handle (BH #SM2971). See: https://bit.ly/3syH7Ic

Q: 6. For this single motor model, where can I find an ARRI rosette attachment I can buy additionally to attach on this specific handle? I don't want to buy a 2 motor system.

A: The SmallRig Wireless Follow Focus Controller Kit (B&H# SM3917) does not offer an easy nor intuitive method to connect to an ARRI rosette. Moreover, the thread on the side of the handle requires the use of a locating pin in order to keep it from twisting. The included hardware allows you to attach to that securely as it does feature a locating pin. If you want to use another connector with a true ARRI rosette, however, you are left with just the NATO clamp to which to somehow connect it. On that basis, the only way we could do that would be to use two NATO rails screwed together back to back (with nuts that you'd add), and then a NATO clamp to ARRI rosette connection. You'd need to supply your own the screws and nuts, but buying two of Niceyrig NATO Rail Clamp with Rosette Mount Adapter Kit (B&H# NI234) would be one option: https://bhpho.to/3WYMMF2

Q: 7. Can I power the FF motor with a usb-c cable? For example from the usb-c outlet of the Ronin RS3?

A: The SmallRig MagicFIZ Wireless Follow Focus Basic Kit (B&H# SM3781) features a handwheel controller and also a follow focus motor called a Wireless Receiver Motor, among other parts. The SmallRig Wireless Receiver Motor (B&H# SM3263) can accept a power input through its USB C port. The minimum voltage required is 5VDC, the same voltage that is provided by USB ports such as the one on the RS3 handle and other typical USB ports. Only sources providing 10W (i.e. 2A) or more should be used.

Q: 8. Can the handgrip mount on the right hand?

A: The SmallRig MagicFIZ Wireless Follow Focus Handgrip Kit is a universal grip that can indeed be mounted on either side.

Q: 9. Can the wheel be used to control focus of a Canon R5 with a 28-70 lens on it? Or does it require the motor?

A: The SmallRig MagicFIZ Wireless Follow Focus Basic Kit requires the focus motor.

Q: 10. Does the record button works when External HDMI output set on FX3 to record on Atomos Ninja V?

A: The SmallRig MagicFIZ Wireless Follow Focus Two-Motor Kit (B&H# SM3918) may be used to initiate internal recording in the FX3 while it is connected to an Atomos Ninja V 5" 4K HDMI Recording Monitor (B&H # ATNINJAV) with the additional purchase of the SmallRig USB-C to Sony Multi-Terminal Control Cable for Top Handle (B&H# SM2971B). See below: https://bhpho.to/3XNvJoS