Designed to connect to virtually any device, the hi-gloss white Audioengine A2+ Wireless Bluetooth Speaker System with DS1 Standsprovide an analog RCA stereo input, 1/8" input, and Bluetooth connectivity with aptX HD for wireless connectivity with your compatible devices. The speakers consist of a 2.75" woofer and a 0.75" tweeter and output up to 15W per channel RMS, or 30W per channel peak.

For your convenience, all connectivity is via the powered left speaker, which connects to the passive right speaker with the included speaker wire. The speakers are magnetically shielded, allowing for placement near your TV or other sensitive devices.

30W RMS / 60W Peak Power    Bluetooth 5.0 Wireless Input    2.75" Aramid Fiber Woofers    0.75" Silk-Dome Tweeters    USB, RCA, 3.5mm Audio Inputs    Stereo RCA Audio Output    65 Hz to 22 kHz Frequency Response    Integrated CSR8670 DAC    15° Tilt with Stands    Stands Made from Silicone Rubber

The A2+ Wireless speakers can connect to nearly any Bluetooth source, so you can wirelessly play your favorite apps like TIDAL, Spotify, Pandora, and more. The Bluetooth receiver built into the A2+ Wireless features aptX HD coding for enhanced quality with compatible devices. aptX HD is also backward-compatible with the SBC and AAC codecs, so you can enjoy audio from nearly any Bluetooth-enabled device. Further, the A2+ Wireless has a Bluetooth range of up to 100' with virtually no degradation in audio quality.

These speakers feature acoustic and electrical designs to help provide enhanced bass without using digital signal processing or bass boost circuits.

There's no network to set up or passwords to create; simply plug in or pair your source device and enjoy.

The cabinets, drivers, bass port designs, amplifiers, and crossovers are all tuned together to help create an efficient system that requires less power than passive speakers and a separate integrated amplifier or similar A/V components.

With all the electronics built into the left speaker, it's easy to connect your source device of choice. All the circuit boards for the power and preamp sections are vertically mounted for augmented mechanical shock protection.

The A2+ Wireless speakers use ferrofluid-cooled, silk-dome tweeters with neodymium magnets. The tweeters are engineered to hold up well under high power, and the edge-driven design helps provide smooth response. The aramid-fiber woven-glass composite helps the woofers retain their shape when being driven at high levels.

Both of the A2+ Wireless speakers are magnetically shielded, so you can place them near your display or other sensitive devices.

• Integrated CSR8670 DAC
• Output current limiting, thermal over-temperature, and power on/off transient protection
• RCA and 1/8" inputs provide easy connection to nearly any audio source, including a turntable or TV
• Variable RCA output for subwoofer connection
• 0.75" thick MDF cabinets
• 1/4"-20 threaded brass inserts on the bottom enable attachment to floor stands or wall mounts

Related Questions and Answers

Q: 1. how long does the battery last?

A: I use Eneloop pro batteries and i have been working with them over 5 hours

Q: 2. can i plug in a lavalier mic for better quality recording? I'm concern that if my subject wears this on his belt then the sound quality might be compromised

A: Yes, you can plug a lavalier for better sound.

Q: 3. Is the receiver output mic level or line level?

A: The Sony ECM-AW4 Bluetooth Wireless Microphone System would have line level output.

Q: 4. Can the Bluetooth passcode be user defined? How many characters (or numbers) can be used? I need to keep unauthorized users off.

A: Im not very tech savvy. Unit works great. Its really plug and play. But as far as your question, I use it in my workshop and I'm the only user, so unsure about keeping other users off.

Q: 5. My Yamaha RX-V663 receiver does not have a USB output. What type of USB power adapter do I need to power the Audioengine B1 to be able to use it with my receiver?

A: it plugs into an ac wall outlet for power and then optical or rca input on receiver for the audio output

Q: 6. Can you use multiple (+4) SonyECM-AW4 Bluetooth Wireless Microphone System in same room?

A: I have only used one paired set and in such can't answer this question for using 4.However, my advise is to have sender and receiver facing each other for good quality. If the body conceals the microphone set quality deteriorates significantly.Best have it fixed under your dress, but facing the camera/receiver.

Q: 7. For me it is imperative that I can use this device with an iPhone 6 or an iPad. Is it compatible?

A: At this time I have been unable to connect the bluetooth mic directly with a PC or tablet. The only way to connect it that I know of is the analogue mic input on the tablet.

Q: 8. The 5V-DC port looks like a micro USB, is this correct? And does it come with a power adapter or do I need to supply one?

A: You are correct it is a micro USB connector and it does come with a USB power supply and cable

Q: 9. Is there a particular USB bluetooth adapter that is compatible with device, which will work on Windows 7/8/10?

A: We do not carry a Bluetooth transmitter on the level of this Audioengine receiver. Any Bluetooth audio transmitter should be compatible with your Windows computer. The generally will connect to the headphone jack. This will do the job: Aluratek ABT01F Bluetooth Universal Audio TransmitterB&H # ALABT01F MFR # ABT01F

Q: 10. What kind of external mic will work for this product? I tried to plug in 2 different external lavelier mics and they did not work.

A: any mic that does not require power, or has its own power source. I have added a rode shotgun mic with its own battery and it worked real well. I have a radio shack lav with internal battery and that works will too. I also have a lav that is dynamic and that works too.