Enhance your growing small to medium business's wireless coverage by adding an HPE Instant On AP32 Tri-Band Wi-Fi 6E Access Point 5-Packto your network. Designed for high-density environments with dual omnidirectional antennas, this Wi-Fi 6E (802.11ax) access point delivers up to 3.6 Gb/s transfer speeds over the 6 GHz, 5 GHz, and 2.4 GHz bands.

You can provide power and data to the Instant On AP32 through a single cable by connecting its 2.5G Ethernet uplink port to a PoE++ compatible network device. Supporting up to 75 concurrent users, the wireless signal is secured by WPA2 and WPA3 encryption. You can set the access point on your desk or use the included clip to mount it onto a wall or ceiling. Configure the access point via the HPE Networking Instant On mobile app to set up guest networks, block users, and take advantage of other features.

Wi-Fi 6E (802.11ax) Standard    2.4 GHz / 5 GHz / 6 GHz (Tri-Band)    Up to 3.6 Gb/s Throughput    2.5G Ethernet PoE++ Uplink Port    2 x Omnidirectional Antennas    Wall and Ceiling Mountable    Smart Mesh Support    Supports Instant On Mobile App

Orthogonal Frequency-Division Multiple Access (OFDMA) allows multiple Wi-Fi 6 capable clients to be handled simultaneously per channel. This improves efficiency by boosting overall capacity, reducing latency, and improving end-user experience.

Target Wake Time (TWT) is ideal for IoT devices that communicate infrequently. TWT establishes a schedule for when clients need to communicate with an AP. This reduces power consumption and can extend the battery life of clients.

Multiple Input, Multiple Output (MIMO) allows the access point to serve multiple compatible clients simultaneously.

Extend your network coverage wirelessly with the Smart Mesh feature. Using the Instant On mobile app or web portal, connect the first AP, then plug in another AP to a second power source with the DC power adapter. With a single click, the secondary APs connect to the primary AP over the 5 GHz wireless band, extending network coverage without the need for network cables.

Related Questions and Answers

Q: 1. what is the distance spacing for more than one Access point of this type?Thanks

A: It depends on what it has to go through. 400' line of sight, but drywall, metal, cement, stone, glass etc will all weaken the signal. So it may only work in the room it is in or cover a whole house.

Q: 2. The title says Bluetooth 5.3 but its 5.2 on the box. How do I confirm if its truly 5.3 plus how long is the cable?

A: The TP-Link Archer TXE75E AXE5400 Wireless Tri-Band Wi-Fi 6E & Bluetooth 5.3 PCIe Adapter supports Bluetooth 5.3 through a firmware update. Units manufactured before the firmware update may sat Bluetooth 5.2 on the box, but they can be updated to Bluetooth 5.3. The length of the cable is not specified by the manufacturer.

Q: 3. Our building can have upwards of 250 devices at a time to support for Internet access. Can this AP handle 250 devices at the same time?

A: The Ubiquiti Networks UAP-AC-HD-US Wave 2 Enterprise Wi-Fi Access Point can support up to 500+ users.

Q: 4. I got m y eero pro 6e router from ISP(frontier). Now I want to extend mesh network. But I can't find extender only. No option?

A: You can use the BH #EE6MWFE with the eero Pro 6e router.

Q: 5. The overview says two Ethernet ports if you feed PoE will it send out PoE on the 2nd port to another AP?

A: From manual: The Secondary port is a Gigabit Ethernet port usedfor bridgingwouldnt be on it

Q: 6. Can I installed wall vs ceiling?

A: Yes. Included would be Wall and Ceiling Mount Adapter Kits.

Q: 7. If I connected this to a typical Linksys router one might buy at such as a WRT1900AC, would it work?

A: Yes you can connect to any typical Linksys router just Bridge them together.

Q: 8. Can you use another pro 6E router as a fourth extender or is it just as good to get the 6 extender you referenced? BH #EE6MWFE

A: Yes, you can use an additional eero Pro 6E as a fourth mesh router with the eero Pro 6E AX5400 Wi-Fi 6E Tri-Band Gigabit Mesh System (Router Only, White). Using the eero 6 Mesh Wi-Fi Extender, B&H # EE6MWFE, as a fourth router will work as well, but the unit does not support as much throughput and does not have a 6 GHz band that connected devices could utilize.

Q: 9. How do you pair the unit to the router?

A: This is done with the UniFI Controller Software.

Q: 10. How hard is this unit to install and operate? I am not extremely technical or computer savvy will I have a hard time?

A: It's not hard to install or setup but there may be some conceptual issues that come into play for a non-technical user. The biggest thing you need to understand is that its a wireless bridge only, not a router . You'll need an additional device to do NAT, firewall, DHCP, port forwarding... all of the features that most consumer wireless routers do.The upside of this device is the stellar WIFI coverage (at this price) and the management features when you have more than one AP, or are running multiple SSIDs. Also the PPoE feature allows you to mount it unobtrusively on a ceiling or wall (theres a config option to shut the lights off and it just looks like another smoke alarm type device).If you don't understand any of the above terms, there may be a bit of a learning curve with this device.