Support speakers with the K&M Speaker Pole with Easy Lock and M20 Connector. This stand has an M20 threaded stud for fastening to a subwoofer or any base with a compatible socket. Find an optimal position with 35.4 to 55.1" of height adjustment. The expanding easy lock mandrel secures your speaker with a compatible socket. A 77.1 lb weight capacity secures your equipment.

Threaded M20 Stud    35.4 to 55.1" Height Adjustment    Locking Screw and Safety Hook    Expanding Mandrel Easy Lock    77.1 lb Weight Capacity

Related Questions and Answers

Q: 1. The flash does not hold a charge for long or batteries seem to deplete when turned off. Is this normal?

A: LightPix Labs FlashQ M20 with Transmitter with Full Manual Exposure Control should allow for 100 flashes at full power in one set of batteries. At minimum power it should last 2000 flashes. If you are getting less than that I would recommend checking if the battery that you are using has an issue. Batteries should not be depleted when turned off.

Q: 2. Would these magnet attachments fit on the screws of the molus x100?

A: The Zhiyun Accessory Kit for M20 Series BH #ZHEX1H19 is specifically for the M20 and M20C.

Q: 3. Will this work on Leica Q and CL?

A: The LightPix Labs FlashQ M20 with Transmitter with Exposure Control for Sony is not compatible with the Leica Q or the Leica CL; it is compatible with Sony cameras with Sony ADI / P-TTL capability.

Q: 4. is the receiver built into the flash??

A: Yes the LightPix Labs FlashQ M20 with Transmitter with Full Manual Exposure Control has a receiver built in that receives the signal from the included transmitter.

Q: 5. can this one hold profoto D4?

A: Yes

Q: 6. What's the difference between the m20 for fujifilm and the Q20 for fujifilm? They both seem to have TTL.

A: The M20 has a more durable metal and plastic body while the Q20 is all plastic.

Q: 7. Once the JerkStopper JS020 is clamped to the cable, how can it be released?

A: The plastic cable clamp is two pieces. The U clamp bottom piece holding the cable will slide sideways if pushed along the cable and disengage from the top plastic piece with the string. Like a zip tie if you could move it sideways to disengage the teeth.

Q: 8. Does the transmitter have the ability to be used with a sync cable?

A: The transmitter of the LightPix Labs FlashQ M20 with Transmitter with Exposure Control (B&H# LIFQM20M) does not have a built-in sync port for use with cameras not possessing a standard ISO hot shoe with a typical center pin. However, this may be added to it for use plugged into a camera (or medium/large format lens) standard PC sync port: Impact SCS-MPC PC Male to Hot Shoe Sync Cord (12") (B&H# IMSCSMPC) https://tinyurl.com/yc3bv96d

Q: 9. Is this one work for bluebird SL?

A: No, the Auray Shockmount for Rode Podcast Mics and Mics with M20 Thread is specifically for Rode microphones with an M20 thread.

Q: 10. Will the plug fit/thread into an ATH-M50 sleeve? Want to keep the original sleeve so I can use the screw-on adapter. Thx!

A: Specs would suggest that there should be no issues with this.