Support speakers and lights with the K&M Universal Lighting Speaker Stand Blackby K&M. This stand features a space-saving design with a 19.2 x 19.2" steel base. Find an optimal speaker position with 55.9 to 95.2" height adjustment secured by a locking screw and safety hook. A steel construction ensures long-term durability.

Space Saving Design    19.2 x 19.2" Steel Base    55.9 to 95.2" Height Adjustment    Locking Screw and Safety Hook    Steel Construction

Related Questions and Answers

Q: 1. what is the diameter of the stand legs, which caster wheels will fit, impact 22mm or 25mm?

A: Wheels are not recommended for use on background support kits like the Savage Universal Background Stand BH #SAUBGS.

Q: 2. Will this work with a backdrop that is 24' wide? Or do you need two 12' backdrops?

A: You could make this work with a 24' wide background but you would need to clamp it onto the bars with A-clamps because the middle stand will prevent a background with a pole pocket from passing onto the next bar.

Q: 3. I bought the 12 foot stand- though the specs say it closes down to 42 inches – it is 45! Could I be doing something wrong?

A: There should only be one way to close the Kupo Universal Stand (Black, 12.5'). The manufacturer does state that the closed length of the stand is 42.1 inches, or 107 cm. I would make sure that all risers on the stand are at their shortest setting, and also make sure the knobs on the stand are not interfering with each other and restricting the stand from closing properly. You may also check to ensure no additional studs or accessories are connected to the top of the light stand.

Q: 4. How much sag do the crossbars end up having? Want to hang a 20' long muslin on it straight, no corner adapter.

A: The center stand and bracket of the Savage Universal Background Stand BH #SAUBGS is required.

Q: 5. Are the widths adjustable? If I wanted to hang an 8x10 drop on one side and an 8x8 on the other to create a room would I be able to adjust the length to clip the 8x8 drop?

A: Yes. The following unit adapts to telescopic crossbars and very easy to adjust from 4 1/2 ft to 12 ft.

Q: 6. Is there any quality difference between the none-air cushioned and the air cushioned Kupo Universal Stand?

A: The Kupo Universal Stand (Black, 12.5') supports more weight (up to 19.8 lb), and the Kupo Midi Pro Stand (Air-Cushioned, Black), B&H # KUKS040511, can support up to 11 lb. The non-air-cushioned version weighs 5.1 lb, while the air-cushioned version is 2.9 lb.

Q: 7. Are the knobs aluminum or plastic?

A: Plastic knobs.

Q: 8. Do these filters cover the Canon 600EX-RT speedlite? In the specs, it says the dimension of each filter is 3 x 2.5 , but I don't know if that includes the part of the filter that goes under the band or not. Thanks!

A: Yes. The area that covers the face of the flash head is actually a tiny bit larger than the 600EX-RT head. This is great because it truly colors all the light blasting out, without any light leaks around the edges of the filter.

Q: 9. Will this hold the Aputure 120D light?

A: I think it will. I have used it to support a pair ribbon mics which weighed about 2.5 lbs. As long as nobody bumps into it, you should be ok.

Q: 10. If you do not want the corner setup and only want the full width, how do you attach the middle section without a large gap that the bracket causes? I purchased this expecting to assemble it to look like the second product photo and use two rolls of paper side by side to create a large backdrop. This, however, does not seem possible.

A: According to the manufacturer, this stand would not be able to have two rolls of seamless placed along the full length without having a gap in the center.