Audio-Technica At-Umx3 Usb Audio Mixer For Livestreaming

Audio-technica At-umx3 Usb Audio Mixer For Livestreaming

Product Code: eq164032
Availability: In Stock

$447.00 $666.03

Qty

13 reviews Write a review

Description
Reviews (13)

Mix and stream professional sounding podcasts to your computer or tablet with the AT-UMX3 from Audio-Technica, a 3-channel mixer and USB-C interface with simple and intuitive controls that makes it easy to get quality results.

Designed to offer a streamlined and cost-effective broadcasting solution, the AT-UMX3 is lightweight and compact and powered via USB. Channel one offers a combo XLR-1/4" microphone input and preamp with switchable 48V phantom power for condenser mics. Musicians will appreciate being able to switch channel two between the Hi-Z guitar input and a stereo line input for keyboards and electronic instruments. Channel three is dedicated to loopback audio from your computer provided via the USB port, allowing you to add background music or game sounds and send the stereo mix back for streaming.

3-Channel Mixer/Interface for Podcasting USB-C Port for Computer or Mobile Device XLR-1/4" Microphone Input with 48V 1/4" TS Guitar Input Two 1/4" Line Inputs Loopback for Audio from Computer Front-Panel Headphone Jack Built-In Preamp for Mic Input Mic and Monitor Mute Buttons Intuitive Gain and Volume Knobs

Key Specs
Channels of I/O	3 Inputs / 0 Outputs at 192 kHz
Maximum Sampling Rate	192 kHz / 24-Bit
Number of Microphone Inputs	1
Analog Audio I/O	1x Combo XLR-1/4" TRS Balanced Mic Input 1x 1/4" TS Unbalanced Hi-Z Input 2x 1/4" TRS Balanced Line Input
Digital Audio I/O	No
Host Connection	1x USB-C
OS Compatibility	Windows 10 Windows 11 macOS 10.15 or Later iPadOS 16.4.1
Power Requirements	USB Bus Power
Parameters
Channels of I/O	3 Inputs / 0 Outputs at 192 kHz
Built-In DSP	No
Maximum Sampling Rate	192 kHz / 24-Bit
Number of Microphone Inputs	1
Built-In Microphone	No
Input Level Adjustment	3x Knob
Signal Processing
Pad	No
High-Pass Filter	No
Solo/Mute	Mute per Input Channel, Master
Connectivity
Analog Audio I/O	1x Combo XLR-1/4" TRS Balanced Mic Input 1x 1/4" TS Unbalanced Hi-Z Input 2x 1/4" TRS Balanced Line Input
Phantom Power	48 V, Selectable On/Off
Digital Audio I/O	No
Host Connection	1x USB-C
Host Connection Protocol	USB 2.0
USB (Non-Host)	1x USB-C
Sync I/O	No
Network I/O	No
MIDI I/O	No
Expansion Slots	No
Wireless	No
Digital Audio
Sample Rates	Up to 192 kHz
Sample Rate Conversion	No
Bit Depths	Up to 24-Bit
Sync Sources	No
Audio Storage & Playback
Media/Memory Card Slot	No
Compatibility
OS Compatibility	Computer: Windows 10 or Later / macOS 10.15 or Later Mobile: Android/iPadOS
OS Compatibility	Windows 10 Windows 11 macOS 10.15 or Later iPadOS 16.4.1
Mobile App Compatible	Yes: Android & iOS
Mobile Device Compatibility	iPad iPhone Android Tablet Android Smartphone
Required Hardware	USB 2.0 Port
Power
Power Requirements	USB Bus Power
AC/DC Power Adapter	5 V at 500 mA
Power Consumption	2.5 W
Physical
Dimensions	5.2 x 5 x 1.7" / 131 x 127 x 44 mm
Weight	11.8 oz / 334.0 g
Packaging Info
Package Weight	1.335 lb
Box Dimensions (LxWxH)	8.6 x 8.1 x 2.7"

Compact, feature-rich livestreaming USB audio mixer provides high-quality sound for desktop audio production
Plug-and-play connectivity to computer or mobile device (no special drivers required)
High-performance A/D converter with resolution up to 24-bit / 192 kHz provides crystal-clear output for voice and instruments
Loopback function makes it easy to mix mic and instrument inputs with background music, game sounds, or other audio input from a computer and send the stereo mix back to the computer for streaming
Equipped with a single mic input (XLR or ¼"), two LINE inputs for guitar and keyboard, and USB-C input for connecting to a computer
The XLR input provides power for condenser microphones, such as the legendary AT2020, and is compatible with all dynamic microphones, such as the AT2040
Simple, intuitive controls for independent, real-time volume adjustment of each input
Mute button enables quick muting of microphone without disrupting other audio inputs
Headphone jack with volume control lets you monitor the mix
Microphone monitor mute button allows mic audio to be muted only in the mix sent to connected headphones
Advanced noise-resistant design helps deliver clean streaming audio
Equipped with output peak, SIG, and power indicator lights
Includes a USB-C to USB-A cable and a USB-A to USB-C adapter

Related Questions and Answers

Q: 1. Does this supply phantom to mics in 1 and 2?

A: Yes the Gemini Compact 8-Channel Bluetooth Audio Mixer with USB sends phantom power to both mic inputs.

Q: 2. Can this be used with a mobile device?

A: The Saramonic MV-Mixer USB-C Audio Interface is not guaranteed to be compatible with mobile devices.

Q: 3. will this fix sound devices 888 and sl2?

A: Yes, this could fit the SD888 and SL2.

Q: 4. What are the pros and cons of using a shielded cat5e/6 for the audio engine connection?

A: Hi Harold! Thank you for your question. Shielded cables are more effective for blocking interference in comparison to unshielded, so installing high-quality shielded cables will help to ensure high speed performance. However, I would recommend contacting Technical Support for your region - they will be more than happy to look further into this query for you. They will be able to advise you on the best option for your particular situation.

Q: 5. PkGemini Compact 8-Channel Bluetooth Audio Mixer with USB Bluetooth spkr, crdless mic & cmcorder all be connected at the same ti

A: The Gemini GEM-8USB Compact 8-Channel Bluetooth Audio Mixer can be used with a wireless microphone system connected to an XLR input and the audio output can be sent to a computer via USB, as well as to a camcorder through the RCA record output. and PA speakers can be connected to the 1/4" left and right main outputs. The GEM-8USB does include a built-in Bluetooth receiver to stream audio from a Bluetooth-enabled device like a smartphone, tablet or computer into the mixer, but it does not have a built-in Bluetooth transmitter to be able to send audio from the mixer out to a Bluetooth speaker.

Q: 6. How is the bluetooth audio level controlled? Is the audio level determined by the device connected to the bluetooth?

A: The Gemini GEM-8USB Compact 8-Channel Bluetooth Audio Mixer has separate buttons for "Vol+" and "Vol-" that are located on the upper right, directly below the red LED indicator for the Bluetooth signal. Press and hold the appropriate button to raise or lower the volume.

Q: 7. can you record single tracks at a time, or overdub onto a track?

A: Yes you can do both.

Q: 8. Will this fit an Zoom F8n?

A: The ORCA OR-34 Audio Mixer Bag will fit a Zoom F8n, but there will be extra space. The ORCA OR-270 would be recommended instead.

Q: 9. Would this work on an iPad using a USB-C to Lighting adapter? Does that adapter exist?

A: No

Q: 10. Will this device allow LTC timecode to be passed to the computer?

A: The Audio-Technica Consumer ATR2x-USB 3.5mm to USB 2.0 Type-C Audio Adapter does not support timecode.

BoseRules	17/09/2024
[1x USB-C] This thing is an absolute monster for a little mixer. Running it on the L1 Model 2 with great ease. Sounds good to me. 5

Kenny	07/08/2024
[5 V at 500 mA] I'm liking my new Bose T8S mixer. I like: 8 channels (with two aux inputs for a possible 10 inputs. STEREO! Simply pan where you want a channel to be in the stereo field. Of course, this requires a stereo-capable PA. Compact size Intuitive layout and operation. In fact, if you are upgrading from a T1 like me, it operates the same so there's little to no learning curve at all, just more channels. Note: Be sure and upgrade the firmware before use. 5

Adam P	01/08/2024
[1x USB-C] I bought this interface to use with my laptop for recording my vocals. I did a quick test and everything worked great and sounded great. Highly recommend this mini interface for recording a single instrument or vocals. It's easy to setup as well and the driver installs instantly on windows 7 and windows 10. Includes phantom power. 5

Jetson	18/06/2024
[2.5 W] I’ve been using ToneMatch since 2012 and Iam BLESSED with this Product. I use this device so much that I was hoping BOSE would release their next version with more channels and added features. With T8S mixing will be awesome yet compact with KN the move gigs. ToneMatch is so good that I hope Bose will release its 16 Channel or 32 Channel full grade mixer, and best part are the presets that has always made my setup-Olyg & Play so Easy. I’ve literally setup my entire band sound with L1 Conpact and 3 Musicians And 2 singers in less than 20 minutes, just using the presets. Thank you BOSE. Best Wishes! 5

anyonymous	17/06/2024
[1.335 lb] This is a great mixer, it makes anything sound better without almost any tweak, I tested it with my two Bose S1 Pro speakers, and it sounds amazing, also I tried it with other "bad sounding" Harbinger speakers that were sounded very bad with the harbinger mixer, and it makes a huge difference, it makes the sound shine impressively, every person in the gig was impressed of the good sound it can produce. Also, it helped me a lot by improving my installation/ setup time using the scenes feature. Missing features would be: 1) to include a Bluetooth channel as the S1 Pro integrated mixer, 2) to be able to recall volume of every channel when saving the scenes. 3) add the xlr/ plug option for the auxiliary inputs 4) allow the user to specify to what channel phantom power will be applied. 5

Bobby	11/06/2024
[USB 2.0 Port ] This mixer is a great value and performs perfectly as an audio interface for our Internet stream. 5

David	28/05/2024
[1] I'm a one-man operation doing gigs with just me singing and playing guitar. I use a Bose L-16 speaker and a TC Helicon guitar/voice processor. Before, I'd have to go around to the back of the L-16 to make adjustments. First I bought a Yamaha mixer to go with my Bose L-16. It might have worked fine if I'd worked harder to figure it out, but I didn't. So, later, I splurged on this Bose 4-channel mixer, and I love it. It's small enough to rest on a stand attached to my mic stand and simple enough that even a cave man or I can operate it. I especially love having the mute buttons right in front of me. I also love that I now have a master volume control, which you don't have on the L-16. Slightly off topic, but I also recently added the Bose S-1 Pro + and the XLR remote. With this, I can plug the remote transmitter into the back of the L-16 and wirelessly send a signal to the L-1, which I can then use as a second speaker pointed at the audience or as a monitor pointed at myself. And since the L-1 is battery-powered, I can put it anywhere without having to worry about cords/cables at all. 5

Trini	16/04/2024
[Up to 24-Bit] Issues with my tone match, and I upgraded to this new model, waiting to try it out, great reviews. 5

Bob	15/04/2024
[1x USB-C] I'm somewhere between a beginner and a novice, when it comes to creating, mixing, and recording music. Even though I'm not ever going on tour, I like upper end equipment, with a pretty simple user interface. That is why I picked the Bose T8S. I have a lot to learn, but I have been able to make great progress in just a couple of weeks. And purchasing from B&H, I know my products will get here in great shape, and on time. 5