Combining high-definition optics and a wide field of view, the ZEISS 10x42 Conquest HDX Binoculars | High-Performance Opticsdeliver bright, high-contrast imagery from a durable but lightweight chassis. Extra-low dispersion, field-flattening lenses with ZEISS T* antireflective coating produce the clarity and color fidelity you expect from the brand, while the LotuTec coating keeps smudges and droplets off the glass. The chassis is made from magnesium and has a protective slip-resistant rubber armor exterior. The optical tubes are nitrogen filled and O-ring sealed to be waterproof to 13 feet and nitrogen-purged for fog-resistant performance.

ED Lenses, 90% Light Transmission    Field-Flattening Edge-to-Edge Sharpness    Compact Roof Prism Design    T* Fully Multicoated Optics    LotuTec Protective Lens Coating    Wide 66° Viewing Angle    Close Focus Distance 6.6'    Nitrogen Filled, Fog & Waterproof    Rubber-Armored Magnesium Chassis    Click-Stop Twist-up Eyecups

• Compact roof prisms
• Extra-low dispersion glass lenses offer clear and crisp images with little distortion and true color rendition
• T* antireflection fully multicoated optics improve light transmission, color rendition, and contrast
• LotuTec lens coatings resist water, oil, and sap to keep lenses clear and make cleaning easier
• 345' field of view at 1000 yards
• 6.6-foot close focus distance for nearby birds, insects, animals, flowers, etc.

• Closed-bridge configuration
• ±4 dioptric correction
• 54-74mm interpupillary adjustment range
• Easily install optional tripod adapter
• Removable flip-down lens covers
• Twist-up rubber eyecups for use with or without eyewear

• Lightweight and durable magnesium chassis
• Nitrogen filled for fog and waterproof performance
• O-ring sealed, rated to 400mbar of pressure, submersible to 13'

Related Questions and Answers

Q: 1. does the ZEISS Tripod Adapter for Conquest HD and Terra ED Binoculars work with Zeiss Victory T*fl 42 binoculars?

A: The ZEISS Tripod Adapter for Conquest HD and Terra ED Binoculars BH #ZETEBTPA • MFR #528388-0000-000 will work with all Conquest HD binoculars

Q: 2. How do I install this? Does the cap just come off to expose the threads?

A: In binoculars having threads, you first remove the cap, to expose the bino's threads. The pin threads into the bino's female, then you tighten the lever.You will need a camera plate that fits your tripod.

Q: 3. Will it work for Zeiss 10x42 Victory T* FL? Is this the same cordura case that came in with those binoculars when new? Thanks

A: So I compared the sizes of the two Binoculars. The Victory Pair that you have are 6.8 x 4.9", and the Conquest Models are 6.5 x 4.7". So I believe this case would work with the Pair that you have. You might just have to screw the eyecup's down with the covers on top. However this case should work.

Q: 4. Will this adapter work with a Velbon (D-500) QR type tripod?

A: Yes, the ZEISS Tripod Adapter for Conquest HD and Terra ED Binoculars will mount on any tripod or QR plate that uses a standard 1/4-20 thread.

Q: 5. Will this bag fit a Canon 10x30 is II?

A: The interior dimensions of the ZEISS Cordura Case for Conquest HD 42mm and Terra ED 42mm Binoculars are about 7x5x3 inches so the Canon 10x30IS II binoculars should this case.

Q: 6. Will this fit an old Leica 8x42 trinovid binocular?

A: Yes, the Leica 8x42 trinovid binocular, will fit tightly into the ZEISS Cordura Case for Conquest HD 42mm and Terra ED 42mm Binoculars

Q: 7. Does it fit the Zeiss 10x42 Victory T* FL? - is it the same cordura case that came in with those binoculars when new?

A: So I compared the sizes of the two Binoculars. The Victory Pair that you have are 6.8 x 4.9", and the Conquest Models are 6.5 x 4.7". So I believe this case would work with the Pair that you have. You might just have to screw the eyecup's down with the covers on top. However this case should work.

Q: 8. Will a Nikon 8x42 EDG fit in this case?

A: The Nikon 8x42 EDG Binocular BH #NI8X42EDGG • MFR #7566 will not fit in the ZEISS Cordura Case for Conquest HD 42mm and Terra ED 42mm Binoculars BH #ZECORDRABAG • MFR #000000-1976-008

Q: 9. is there a way to purchase a second / backup binocular stud? I would like to attach one to a high power bino and low power bino

A: Unfortunately Zeiss does not sell the stud separately for the ZEISS Tripod Adapter for Conquest HD and Terra ED Binoculars.

Q: 10. Will the Zeiss HD42 bag fit an older Nikon 7 X 35 73 degree binoculars?

A: It is a bit short, even for the old Zeiss binoculars that I have.