Receive two simultaneously transmittted discrete 12G-SDI signals over single mode fiber cable with the Freakshow HD Fiber to 12G-SDI Dual SDI Receiver with Locking Power Connector. This low-power consumption receiver features a LEMO power connector to help avoid accidental pull-outs. The receiver re-clocks the BNC SDI outputs, and can be up to 6.2 miles awayfrom the transmitter.

Supports 12G-/6G-/3G-HD-/SD-SDI    Re-Clocks Output Signal    2 x Single Mode Fiber Inputs    5 to 36 VDC Power Input

Related Questions and Answers

Q: 1. is power supply included with device?

A: Yes it is: In the Box: Freakshow HD Micro Split 4K/12G Reclocking DA with Standard Connector Power Supply Limited 1-Year Warranty

Q: 2. After BMDs announcements at NAB2024 is this part deprecated in favor of the new 2110 IP Mini BiDirect 12G?

A: No, the Blackmagic Design Mini Converter Optical Fiber 12G-SDI will still have it's use cases. You should get the signal convertor that best suits your specific workflow.

Q: 3. What's the latency when converting SDI to fibre and then back to SDI again?

A: There is a near zero delay in this conversion, as that is one of many benefits of transmitting/extending over optical fiber.

Q: 4. So for BM Studio 4k Pro Cam, do I just need this, fiber cable, and 12G SFP Optical Module to get to ATEM Switcher?

A: The Blackmagic Design Mini Converter Optical Fiber 12G-SDI is a bi-directional optical fiber to 12G SDI signal convertor. So if you are planning on outputting an SDI signal from the BM Studio 4k Pro and converting it to fiber this convertor would work well, however you would also need an SFP adapter such as the Blackmagic Design 12G SFP Optical Module Adapter, and SFP receiver on the receiving end of the signal as well.

Q: 5. Can I use this in simplex, just one LC connector? After adding a module of course.

A: Yes, that should work.

Q: 6. Other than an additional 2 outputs, how is this different than BH #FRMSX2L? I want to be sure the internals and technology used is exactly the same as I wish to use this device not only to split a signal, but to add additional safeguards and protection to the SDI port on the RED Komodo in the event of a power surge. Thanks.

A: Both Freakshow HD Micro Split DA models are the same other than the additional outputs. Please still follow the RED SDI safety guidelines. * Preventing Damage to SDI Outputs https://bit.ly/3i0sQi9

Q: 7. How long of a run can this handle?

A: Depending on what type of fiber cable you are using, distances can be hundreds of feet to many miles.

Q: 8. Does the converter include the SPF module?Because in the image not appear. Thks

A: It does not. I used a 10Gtek SFP-10G-LR With SMF and it works great.

Q: 9. Will this work with Multi Mode fiber? Has anyone tried?

A: I have not tried this, but the adapter does not come with a SFP module so it would be worth a try. They recommend SMF because it loses less than MMF. I used 10Gtek 10G-SFP-LR modules and they work great. Blackmagic says it works with any SFP modules so I imagine it will work with MMF but no guarantees.

Q: 10. Do you need to download any software for the Freakshow to work?

A: We cannot find mention of any software requirement for this device.