Easy to use and compact enough to fit in your pocket, the CT200 from Behringer is a microprocessor-controlled cable tester with three testing modes: Cable, Installed Cable, and Test Tone. With easy operation via the intuitive LED display and support for seven connector types, the CT200 is a versatile portable cable tester.

The CT200 sports connectors for testing XLR 3-pin, speakON, 1/4" TRS, 3.5mm TRS, RCA, RJ45 (ethernet), DIN 5-pin (MIDI), and USB-B cables. Test tones can be performed at 1 kHz or 440 Hz at three sensitivity levels (+4 dBu, -10 dBV, and -50 dBV). Continuity check and intermittent contact functions are available for testing long or complex cable runs. You also get phantom power and ground-shield checking functions. The CT200 runs on two AA batteries (sold separately).

Microprocessor-Controlled Cable Tester    Cable, Installed Cable & Test Tone Modes    XLR, speakON, 1/4" and 3.5mm TRS Inputs    RCA, RJ45, DIN 5-Pin, and USB Inputs    Easy Operation, Intuitive LED Display    Continuity Check Function    Intermittent Contact Detection    Phantom Power and Ground-Shield Check    Test Tone: 1 kHz or 440 Hz at 3 Levels    Runs on Two AA Batteries

• 3 testing modes: Cable, Installed Cable, and Test Tone
• Accepts XLR, speakON, 1/4" / 3.5mm TRS, RCA, RJ45, MIDI 5-pin DIN, and USB
• Continuity check and intermittent contact detection
• Phantom power and ground-shield check
• Test tone generator: 1 kHz or 440 Hz at +4 dBu, -10 dBV, or -50 dBV
• Microprocessor control
• Compact enough to fit in your pocket
• Runs on two AA batteries (not included)

Related Questions and Answers

Q: 1. Does this tester serves for SDI HD cable? RG-59

A: The CBT-MF cable tester is designed to test XLR, 1/4 , RCA, Speakon, RJ45, RJ11, MIDI and BNC terminated cable. RG-59 coax cable is generally terminated by BNC connectors and continuity in these cables can be tested with this unit.

Q: 2. Will this unit test the shield on a shielded Cat6?

A: I did not purchase this unit, I bought the lower unit dedicated to analog audio. Your answer may be best answered by the manufacturer. On my balanced audio cables it does not test the shield.

Q: 3. LANC specifies a 2.5 mm plug. Is this really 3.5 mm as you state, i.e. not a LANC connecor, or is it just a typo?

A: It's the LANC size. I use it with this Varizoom and it works great: https://a href= http://www.bhphotovideo.com/c/product/330007-REG/VariZoom_VZ_ROCK_VZRock_Variable_Rocker_for_LANC.html target= _blank www.bhphotovideo.com/c/product/330007-REG/VariZoom_VZ_ROCK_VZRock_Variable_Rocker_for_LANC.html/a

Q: 4. What is the range of this tester?

A: Maybe up to 150' but the manufacturer has not published this specification. Contact them at: support@soundtools.com

Q: 5. can it test up to 1,000 Mb/s?

A: The Greenlee NC-100 NETcat Micro Wiring Tester will not test up to 1,000 Mb/s.

Q: 6. Can this test cables with different connector types on each end? For example XLR on one end and TRS on the other.

A: Yes, you can test cables with different connector types on each end.

Q: 7. Is this made in usa?

A: Yes, this is made in the USA.

Q: 8. Will this cable along with. The multi port adapter allow me to use a rocker zoom remote with my sony rx10 iv? Will that work on an rx10 iv?

A: no it will not. This is designed for older Sony consumer camcorders.

Q: 9. What is the difference between this cable and this one? a href= http://www.bhphotovideo.com/c/product/861096-REG/Libec_A_3AV_LANC_AV_Adapter_Cable_for.html target= _blank http://www.bhphotovideo.com/c/product/861096-REG/Libec_A_3AV_LANC_AV_Adapter_Cable_for.html/a

A: No differences, If you want to control your Zoom, Rec and stop that is the right cable you need for your Sony camera. This is designed to work with the varizoom or other Lan's cable connections that have a male mini plug.

Q: 10. I wish to control a Vixia HF G30 with a Lanc miniplug port from a Sony zoom controller with a Sony Mini Audio Video cable plug. Do you have anything that will work?. I see that you have cable to go from land to Sony AV mini plug but I wish to do the reverse. Mike.

A: I am using this VariZoom adapter to go from a SONY CX-160 camcorder with an AV connector to my SONY LANC remote control model RM 870 tripod and it works works perfectly allowing smooth variable speed zoom control. It is far superior to the very touchy SONY RM-AV2 remote which was designed for the camera. I suggest you buy the VariZoom adapter cord from B&H. If it works, you're golden. If it doesn't work, return it immediately with an explanation. I have been buying from with B&H for over 20 years and never had a problem.