Use wide-angle lenses with the Intrepid Camera Recessed Lens Board Copal #04 x 5 view camera with this Recessed Lens Board. The board brings the lens 13mm closer to the focal plane, allowing for the use of lenses between 75 and 90mm. Designed for any lens with a Copal 0 or Compur 0 shutter, the board also comes with an extension pin to use with standard shutter-release cables. The lens board was made for the Intrepid 4x5 View Camera but will also work with any camera that accepts Linhof-style boards.

For Wide-Angle Lenses on 4 x 5 Camera    Compatible with Copal/Compur 0 Shutters    Extension Pin for Shutter Release Cable

Related Questions and Answers

Q: 1. Would a Dana Dolly Bowl to Mitchell Adapter work with this?

A: The Dana Dolly 100mm Ball to Mitchell Adapter or the Dana Dolly 150mm Ball to Mitchell Adapter should fit within the Proaim Heavy-Duty Cinema Hi-Hat with Octagonal Board (Mitchell).

Q: 2. Is this the right board for making V-flats ?

A: Yes, you may use the Nielsen & Bainbridge Clay Coated Foam Core Board - 48 x 96 x 1/2 to create V-flats. V-flats are typically made from Foam Core or Gator Board. While we do not carry Gator Board, the 4x8-foot Foam Core option listed above would work for your needs.

Q: 3. Guys Do you think I can use this Softbox with a Strobe head light also ? or just speedlite flash ?

A: Absolutely you can use this with a strobe as well as a speedlight! It is made easier though if you purchase the Westcott Appolo Mounting Arm as well, since the strobe can mount to the arm then stick out the bottom of the softboz allowing access to the controls on the back of the strobe. Without the arm, the strobe is completely inside the softbox which means you either have to reach up through the zippered compartment on the bottom, or pull off the front diffusion panel to change your power settings.

Q: 4. Does this interface enable the recording from the SDI input directly to the SxS card (no XDCAM disc)?Thanks

A: This updates the older version of the PDW-HR1 so that it can record FROM the SxS cards, However, it does not allow it to record TO the SxS cards.

Q: 5. Are there any CFL fixtures that will work with this? Looking for this to pull double duty for stills as well as video. I know the D5 will fit in the orb, looking to put a continuous light in here as well.

A: From Westcott's Apollo product description The 28 Apollo can be used with flash, fluorescent sources or hot lights up to 500 watts .

Q: 6. What are the dimensions of this product?

A: Here is the product dimension sheet: a href= http://www.marshall-usa.com/optical/lenses/ccd_cmos/v-lh4.pdf target= _blank http://www.marshall-usa.com/optical/lenses/ccd_cmos/v-lh4.pdf/a

Q: 7. Do you icc profile for this media?

A: Yes, the ICC profiles for FUJIFILM 20 x 30" Semi-Gloss Resin-Coated Board (10 Sheets) for Epson SP 800 and 900 Series printers can be found at the following link: https://www.fujifilm.com/us/en/business/photofinishing/wide-format-Inkjet/rc-board-semi-gloss/support

Q: 8. Would this work nicely on the AD600 and AD200?

A: This Medium Apollo will pair nicely with the AD200. I would suggest using it with the bare bulb in a rear facing position to maximize the spread of light in the modifier. The size of the AD600 and therefore the fit inside the box may not make it ideal unless you use the accessory H600b remote head.

Q: 9. Is this different than the bottom board that comes in the F-2 originally?

A: This is the same board, just a replacement available for purchase.

Q: 10. Can this board be used with a Canon Imagraf 4100s?

A: No, the Canon imagePROGRAF Pro-4100S Printer does not have a straight paper path, and so is not able to print on the FUJIFILM Semi Gloss RC Board.