You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Portabrace Rig-4glcc Glidecam Wheeled Case

Portabrace Rig-4glcc Glidecam Wheeled Case
  • Product Code: eq16522
  • Availability: In Stock

$1,825.95 $2,483.29

The PortaBrace RIG-4GLCC Glidecam Wheeled Casefrom PortaBrace RIG-4GLCC Glidecam Wheeled Caseis designed to carry the Glidecam 2000/4000/HD2000/HD4000 camera rigs, whether fully assembled, or with minimal disassembly of the rig components. Ideal for mid-size rigs like the Zacuto Fee-NG or Redrock Micro ultraCage, this large, flexible case is durable and equipped with accessory items that will assure your gear is held safely and comfortably in place.


The case is made from rugged 1000-denier Cordura and features 1" thick padding surrounding a hollow-core plastic frame. The bottom is bolstered by a layer of waterproof rubber to assist with ground protection. It's designed to be carried by its two, top, suede leather carry handles or removable, suede leather shoulder strap.


The main compartment is accessed via YKK zippers and a secure hook-and-loop fastener strip along the front flap. The compartment is empty and can be configured to meet your needs using Porta Brace's included 7 x 13" divider, Camera Tie-down Cinch and Camera Support Block (foam block). The case also comes with two padded lens cups and a handy white balance card. The case features two large accessory side pockets and a front slip pocket for accessories.

Parameters
Equipment CoveredGlidecam 2000
Glidecam 4000
Glidecam HD2000
Glidecam HD4000
MaterialRugged 1000-denier Cordura
Carrying/Transport OptionsTwo, top, suede leather carry handles
Removable, suede leather shoulder strap
Interior Dimensions (L x W x H)29.5" x 15.5" x 13.5" (74.9 x 39.4 x 34.3 cm)
Exterior Dimensions (L x W x H)31" x 18" x 15.25" (78.7 x 45.7 x 38.7 cm)
Weight10.50 lb (4.76 kg)
Packaging Info
Package Weight24.4 lb
Box Dimensions (LxWxH)32 x 22.85 x 16"

Lightweight, rigid frame protection

Adjustable interior divider and accessories

Related Questions and Answers

Q: 1. Is there any bottom structure to the bag? For example if I put a shorter tripod in the bag and try to roll it, will it sag or is there a hard bottom to keep the tripod supported.

A: Yes, there is a frame within the bag; it should stay rigid in this scenario.

Q: 2. Will this also fit a Glidecam HD4000?

A: Yes, this bag will take the HD4000 as well as the HD2000.

Q: 3. What are the actual dimensions of the case?

A: According to PortaBrace, the dimensions for the Porta Brace Wheeled Carrying Case for Blackmagic URSA Mini Camera are:Interior: 22 x 9.5 x 11 / 55.88 x 24.13 x 27.94 cmExterior: 23.5 x 11.5 x 13 / 59.69 x 29.21 x 33.02 cmWeight: 6.85 lb / 3.11 kg

Q: 4. Will this case hold a full Steadicam Zephyr rig? The Arm, the vest, and the sled with additional accessories?

A: no this will not hold a full Steadicam Zephyr rig

Q: 5. Does it come with a shoulder strap? Suede or nylon?

A: It comes with the strap below. Our images are out of date showing a suede strap. I am alerting our web catalog department. We apologize for the inconvenience.

Q: 6. Will this work for a steadicam solo?

A: It's ginormous. I wouldn't recommend it for only a steadicam. It is more suited for all your equipment, including a steadicam.

Q: 7. Does it come with suede shoulder strap shown in the pictures?

A: This comes with a Nylon Shoulder Strap.

Q: 8. Will this work for glidecam hd1000?

A: A collapsed Glidecam HD1000 is 10 , extended it is 13 . With a camera, maybe 18 . The Porta Brace Carrying Case for Camera and Glidecam HD2000 is 29.5 , plenty of room to take the HD1000.

Q: 9. What are the bag dimensions? Inside and Out.

A: The PortaBrace RIG-URSA Camera Rig Case with Interior Kit for Blackmagic URSA (Black) has the exterior dimensions of 24.0 x 13.5 x 15.0, and an interior space of 22.0 x 11.0 x 13.5.

Q: 10. Can anyone comment on the quality and size of the zipper(s). Are they nice like YKK #10?

A: PortaBrace is using their own zippers but they have the same consistency and strength as the YKK zippers. PortaBrace Wheeled Tripod/Light Case (Black) has a smaller molded teeth than YKK#10

14/09/2024

[24.4 lb] I was never a Porta Brace fan, I was biased by the blue color they used. This case come in black and is made for my Glidecam HD2000 I just bought. When I opened the box i knew this was a step up in quality from even the great names bags I own. It is plenty big for the Glidecam even at at full extension. The dividers and tie downs are all customizable and keep the stabilizer very secure, which is very important when it takes so long to calibrate your stabilizer in the first place. If I had a stabilizer vest there would be plenty of room for that too. There are full length pockets on each side, one thinner zipper, and one wider velcro flap one. The bag completely splits open with the top zipper, but has a great 4 lip at the ends of the zipper to no allow things to spill out of the bag, brilliant. The handles are awesome in your hand, padded and great feeling leather; and there are three of them - on the top and on each of the ends. The shoulder strap is even thicker and goes diagonal across the bag which makes it drap along your body for easier caring. Nothing on feels cheap or does anything seem like a weak point to be careful about. The whole bag feels like it will last forever. One thing I wish was included as a picture of a recommended set up for the inserts in the case. I can't figure out how I'd use some of the inserts.

5
13/09/2024

[24.4 lb] Perfect Fit for my Canon and sony at same time, Keeps it safe and the humidity out , Comes with lens case and dividers that adjust to a snug custom fit, Highly Recommended , I have had PortaBrace bags since 1987 and last a Lifetime

5
14/08/2024

[24.4 lb] I purchased this case as my 'main' gear case for my panasonic GH4 and all it's accessories. I absolutely LOVE this case! It's super durable, has SOOO many pockets for storing gear, cables, lenses etc, and is so rugged and tough I bring it everywhere. It's big enough to fit all my lenses (4) and my Ikan Cinefly Rig (broken down of course) with room to spare. I've maxed it out and with it bogged down the weight isn't TOO bad, but I will say, I do wish they made the gripping handles a littttttle bit more tough, as I feel like with it maxed out weigh wise, the handles are gonna start dethreading and possibly tear off over time. Other than that, this case is literally perfect. I can tell this will serve me well for years to come. 5/5 - 10/10 - I will now ONLY buy PortaBrace gear and bags from now on....

5
13/08/2024

[24.4 lb] I've search for a bag that holds all of my lenses and my camera. I've found one! Plenty of room and comfortable to carry.

5
09/08/2024

[24.4 lb] We used this case to house the Blackmagic Cinema Camera with a View Factor cage & battery mount, 16mm rods, and the Redrock Mattebox & Follow Focus. It's a VERY tight fit but, works great. There's enough room for accessories but PLEASE NOTE: because of the size of the Redrock Mattebox your camera will basically be centered in the case; any accessories will have to fall in around it.

5
03/08/2024

[24.4 lb] This bag is made for a specific camera and a steadicam rig. But I bought it because my camera and lens are long. They fit perfectly in the padded section. There is plenty of room in the rest of the bag for audio cables(I'm not wireless yet!) microphone cases, gaffer's tape, gear bags, and the battery chargers I take to shoots. The bag is huge. The fact that it is a Porta Brace is just a plus. The price is very reasonable. The bag is built like a tank and I expect to include it in my will to my children!

5
27/07/2024

[24.4 lb] We bought this bag so we could consolidate our field gear into something that was easily transportable. It was tremendously helpful to be able to customize the interior panels for a tight fit. The zipper pockets are great for storing hard drives and other production accessories. The case is made from extremely durable material... exactly what you would expect from Porta Brace.

5
11/07/2024

[24.4 lb] Fits FX9 with rails and mattebox + a couple cine primes/batteries.

5
11/07/2024

[24.4 lb] I purchased this case for a long (approximately 1 meter) refractor telescope--(Takahashi TSA120N, with the non-retractable dew shield). I added 1 inch foam padding on the bottom, put some more foam padding in the long side pockets, and voila--I have the perfect case. This thing is VERY well made and has some internal straps by which to secure the scope.

5
27/06/2024

[24.4 lb] Lots of room for gear, batts, small camera and what have you . . .nice hard core materials that porta brace is known for. Good stout zippers.

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Portabrace Rig-4srkor Wheeled Camera Case

$1,968.81 $2,697.27

Portabrace Rig-redepicxlor Wheeled Camera Case

$1,483.05 $1,868.64

Portabrace Rig-redepicxl Wheeled Camera Case

$1,311.60 $1,967.40

Portabrace Glidecam Carrying Case - Black

$882.96 $1,395.08

Portabrace Wheeled Case For 2 Astra Litepanels

$1,111.56 $1,633.99

Portabrace Wheeled Case For Sony Venice

$1,768.80 $2,777.02

Portabrace Wpc-10raud Wheeled Case - Blue

$1,397.31 $1,690.75

Portabrace Wheeled Rigid Dslr Case - Black

$1,368.75 $1,793.06

Portabrace Wheeled Cargo Case For Canon Eos C200

$1,197.30 $1,496.62

Portabrace Wpc-1orb & Wpc-2orb Wheeled Case Set

$2,568.90 $3,262.50

Hprc 2500f Hard Case With Cubed Foam - Red

$412.50 $618.75

Products You May Like

Da-lite Utb Contour 133" Hd Pro Screen

$11,271.00 $17,470.05

Innova Photo Cotton Rag 13x19 25 Sheets

$388.98 $494.00

Gigabyte Z790 Aorus Xtreme X Lga 1700 E-atx

$2,999.97 $4,019.96

Verbatim 1tb Vi3000 M.2 Nvme Pcie Ssd

$708.00 $920.40

Tracktion Studio Content Bundle Download

$2,577.00 $3,504.72