Experience fast and reliable wireless connections in indoor or outdoor spaces by expanding your network with the UniFi U6 Mesh Pro Wi-Fi 6 Access Point Indoor/Outdoorfrom Ubiquiti Networks. Supporting over 350 concurrent connections, this IPX6-rated Wi-Fi 6 (802.11ax) access point mounts onto a wall or pole to provide up to 2973 Mb/s transfer speeds over the 2.4 and 5 GHz bands. You can also isolate guest traffic to ensure optimal security and speed.

Connect either of the two Gigabit speed Ethernet ports to the included PoE injector to transfer both power and data while reserving the other as a passthrough for other devices. Use the UniFi Network application to set up, configure, and manage your device. Your wireless connections are protected by WPA3 encryption.

Wi-Fi 6 (802.11ax)    Up to 2973 Mb/s Total Throughput    2.4 / 5 GHz (Dual-Band)    2 x Gigabit Ethernet PoE Ports    Supports over 350 Concurrent Clients    Guest Traffic Isolation    Includes Wall & Pole Mounting Kits    IPX6 Rated    Up to 2000 Square Foot Coverage    Works with UniFi Network Application

The UniFi U6 Mesh Pro provides up to 2000 square feet of coverage.

• Manage networks from a single interface
• Intuitive configuration options and robust device control and monitoring
• Remote device firmware updates
• Manage network users and guests
• Personalize the design, architecture, and privacy of guest hotspots

Related Questions and Answers

Q: 1. Does the second port provide POE passthrough?

A: No, the Ubiquiti Networks UAP-AC-M-PRO-US UniFi AC Mesh Wide-Area Outdoor Dual-Band Access Point does not support PoE passthrough.

Q: 2. can you attach a switch to the secondary port? I am interested in daisy chaining a few APs and then placing a small network switch at the end of the line for a few hard-wired devices.

A: Yes, you can attach a switch to the secondary port on the BH #UBUAPACMPRUS.

Q: 3. Is the POE+ spec really required to make this run off of a POE switch? The wattage of this unit is within both the per-port and overall wattage of my existing POE (non POE+) switch. Just wondering if I need to upgrade my switch first.

A: A POE+ switch is not required.Per the quick start, any 802.3af/802.3at PoE+ compliant switch.The UAP-AC-PRO uses standard 48V POE, so any compliant switch will work - as is what you have stated that you have.It's the non-PRO versions that don't use standard POE.

Q: 4. With the UAP-AC-M-PRO using an address on our inter-switch network VLAN, are the other VLANS, as recognized by managed switches, passed through the UAP-AC-M-PRO, allowing switches to be connected to three of them and the VLANs supported? There will be four of these placed to share the network with up to 250' between them. Are there specific settings I should apply to make this possible? Thank you!

A: Unfortunately the nature of your request exceeds our technical expertise on this matter. You will need to seek the guidance of a professional certified Ubiquiti installer.

Q: 5. Is the power adapter included or is this something we have to buy in addition. Can you clarify which one is true? Hoping it is included.

A: This is accurate. The PoE adaptor comes with the single units. The multipacks do not come with any PoE adaptors.FYI: You will need still a cat5e or cat6 patch cable to go between the PoE and the AP.

Q: 6. What real world wifi speeds are you all seeing with these WAPs? I have gigabit internet that runs about 800-900mb/s on all the wired devices, but only see between 70-120mb/s when on the AC wifi using Luxul WAP-1510's.

A: We've seen up to 400mbs on these. However a typical wi-fi AC connection depends on the device, distance, interference, etc. Real world for us is 120-180mbs for most devices.

Q: 7. Does Ubiquiti Networks UAP-AC-PRO have POE+ injector included or not?

A: No the injector included is 802.3af standard PoE

Q: 8. are these devices compatible outside the US?

A: Yes, the Ubiquiti Networks UAP-AC-M-PRO-US UniFi AC Mesh Wide-Area Outdoor Dual-Band Access Point are capable of being used outside of the US.

Q: 9. Is this device water resistant/proof? IP rating?

A: The Ubiquiti UAP-AC-M-PRO-US is not IP rated, but it can operate in conditions of up to 95% humidity and has been stated in user testimonials to endure harsh climates and extreme weather.

Q: 10. where should this be mounted on a wall? Are there anything to consider when mounting on a wall? Any location issues? Should it be on a flat wall with no other walls near it or can it be mounted anywhere?

A: It will come down to your specific space, building materials, etc. Please reach out to us at pc@bhphotiovideo.com so we can discuss further and make recommendations.