Nanuk 963 Wheeled Hard Case Pro Photo Kit Black 90.6L

Nanuk 963 Wheeled Hard Case Pro Photo Kit Black 90.6l

Product Code: eq165881
Availability: In Stock

$1,994.85 $2,972.33

Qty

8 reviews Write a review

Description
Reviews (8)

The Nanuk 963 Wheeled Hard Case Pro Photo Kit Black 90.6Lfeatures a 90.6L, black case made from lightweight NK-7 resin to protect your sensitive gear. Five PowerClaw latches use compressive force to keep the case securely closed until you open it. Integrated slide locks prevent the case from opening during transport or if dropped. Use the oversized top and side handles for easy solo or team carrying. For heavier loads, use the retractable handle to roll it on its built-in wheels.

Dust, Crush, and Waterproof 5 PowerClaw Latches Automatic Pressure Release Valve Molded-In Bezel System Integrated Lid Stay for Easy Access Stackable with Same-Size Cases Accepts User-Supplied Padlocks Retractable Pull Handle & Wheels

Key Specs
Color	Black
Carry/Transport Options	Retractable Handle, Handle, Wheels (Built-In) • Number of Wheels: 2
Type of Closure	Latch
Interior Type	Insert with Adjustable Dividers (Hook & Loop), Lid Organizer
Water Resistance	Waterproof (Material) IP67
Dimensions	Exterior 32.5 x 21 x 12.3" / 82.5 x 53.3 x 31.2 cm Interior 29 x 18 x 10.6" / 73.7 x 45.7 x 26.9 cm 2.1" / 5.3 cm 8.5" / 21.6 cm
Weight	22.5 lb / 10.21 kg
Parameters
Carry/Transport Options	Retractable Handle, Handle, Wheels (Built-In) • Number of Wheels: 2
Type of Closure	Latch
Interior Type	Insert with Adjustable Dividers (Hook & Loop), Lid Organizer
Features
ATA Compliant	Yes
Pressure/Purge Valve	Yes
Security Lock	Accepts Padlock (Not Included)
General
Water Resistance	Waterproof (Material) IP67
Maximum Volume	23.9 gal / 90.6 L
Padded Interior	Yes
Dimensions	Exterior 32.5 x 21 x 12.3" / 82.5 x 53.3 x 31.2 cm Interior 29 x 18 x 10.6" / 73.7 x 45.7 x 26.9 cm 2.1" / 5.3 cm 8.5" / 21.6 cm
Weight	22.5 lb / 10.21 kg
Packaging Info
Package Weight	33.76 lb
Box Dimensions (LxWxH)	32.8 x 22.25 x 13"

Automatic pressure valve guards against the vacuum caused by changes in altitude and geographic location that tends to seal watertight cases shut

Pressure valve equalizes atmospheric pressure using micro vents, which allow air to pass through, but prevent water from getting inside

Waterproof, custom-fit gasket, or seal, is made from high-quality EPDM rubber and resists deformation and fatigue

NK-7 resin is UV resistant to protect against discoloration and material degradation

Molded-in bezel system includes detailing on the lower portion of the case for installing a panel kit without using a secondary bracket or drilling holes in the side of the case

Bezel system accommodates an optional Waterproof Case Panel Kit or mounted electronic, measurement,or test equipment to use case as independent mobile test or control unit

Integrated lid stay prevents lid from closing while you access your gear

Grooves on the front interlock with built-in feet at the base when stacking multiple cases of the same size, which saves space for transport

Polyurethane wheels for easy rolling and durability

Related Questions and Answers

Q: 1. ursa mini pro?

A: The center of gravity and length of the Ursa Mini makes it difficult if not impossible to balance, and that's with a very small lens. Some users have shown that it can somewhat work if mounted in unconventional ways, but it's not optimal by any means.

Q: 2. Is the Ronin-S compatible with canon XC10 or Nikon D7500 or D750?

A: We have not tested the canon XC10, but upon review it doesn't seem like anything will stop it from being able to be balanced, however more testing is necessary. The Nikon D7500 and D750 can be balanced perfectly, but shutter/startstop, focus is not currently compatible. More development is being done and more cameras will be made compatible in later firmware updates.

Q: 3. The USB-C connection on this, is it able to carry video or is it just a replacement for a regular usb-3.1 connection? Since not all USB-C are the same it is important to know exactly which it is.

A: The USB-C connection on the Ronin-S is not for video.

Q: 4. Since the Ronin follow works with the GH5 with MFR # H-ES12060 lens, will it work with the G85 same lens?

A: The G85 is not on DJI's compatible list for all functions with the Ronin-S. You will be able to balance a mirrorless camera like the G85 on the Ronin-S, but it may not work with the other features of the gimbal.

Q: 5. It's full function comparable canon 80D

A: According to the latest information from DJI they are working on a USB Shutter Control for the Canon 80D that will offer more control over the camera when using the Ronin-S.

Q: 6. will it fit with canon 70-200 f2.8 is usm with 5D mark IV?

A: Hey Chung, the Ronin-S is certainly powerful enough to carry that setup, though it's not recommended since that lense fully zoomed in will be very long. You may need some counter-weights to balance it out.

Q: 7. Is it possible to use it with a little camcorder?

A: That will depend on the size of the camcorder. This gimbal is designed to work with Mirrorless and DSLR cameras. However if the camcorder is small enough and compact in size it may balance as well. For additional assistance with this feel free to email us directly at askbh@bhphoto.com.

Q: 8. Can I use my XC15, with the audio unit, shotgun mic and a Seenheiser receiver attached? Would that setup be too top heavy? Also can I keep my Benro tripod quick release plate on the bottom of the camera so I can swap it to my tripod without any hassles?

A: A camera with an unusual shape like the XC15, combined with multiple audio accessories in our opinion will not balance on the Ronin-S. We do not recommend it. As for the quick release plate that would depend on the exact model of tripod you have. Feel free to email us directly at askbh@bhphoto.com for further assistance.

Q: 9. Which controls (start/stop recording, follow focus etc.) would be available in a RoninS/BMPCC 4K/PanaLeica 12-60mm combination? Is it correct that Olympus m43 lenses are not supported at all?

A: We are not aware of any controls that will work when using the soon to be released BMPCC 4K on the Ronin-S.

Q: 10. Does this item come with the tripod legs?

A: Yes, a rugged tripod comes with the Ronin-S and it can be folded to act as an extension of the handle for easier grip and more control.

Spencer	29/09/2024
[Black] I previously used 2 seahorse 920 cases along with 2 plano trunks and needed more space. I was looking at a larger one, but this one was one sale so I went with it and its hugggge. I can fit so much more then expected. I love the insert. compared to pick and pluck foam you it takes up less space which is great, but still protects my gear. I have a Sony fx6, 2 Sony a7riii, Sigma 24, 50, 24-70, 28-40, 70-200, batteries, a large assortment of cords, filters, and some mics with room to spare. I can fit my whole kit for the most part in this once case which is great. I would suggest getting the lid organizer. Then you can put all your little odds and ends up top and free up even more space. There are two downside to be aware of: 1 - the foam topper in the lid constatly falls out...its not a good fit. You need double stick tape on the back for it to stay. I would say just get the lid organizer anyways. Its like $130 more and totally worth it. 2- with a case this big it is heavy. Its almost 22 pounds empty. So once you load it up its quite heavy. I am a 5'6 and 120lb so I am a pretty small guy...I am able to carry it up a flight of stair and into a car, but it is quite heafty so just something good to keep in mind. Its best to just roll it as much as possible. Great case and worth the money!! 5

Edward	19/09/2024
[Latch] Solid case that can protect sensitive equipment from water, shock, and vibration. This case is large and heavy -- expect oversize and overweight luggage fees from airlines. Functional and nicely styled, more attractive than its big-name competitor. The factory foam comes in five layers -- lid and very bottom are ~1 thick and should not be altered. The middle three layers are 3 (top), 3 (middle), and 2 (bottom) and come pre-perforated on a 2cm grid. The perforations do not necessarily line up vertically across all three layers. Use a kitchen knife to custom cut, as needed. It is easy to follow the perforated grid, but custom/diagonal cuts are possible. Cut each layer as needed. I got creative and tucked smaller equipment away on each layer, using the 3D space. I also may one large bin for less delicate equipment. 5

Jaime	15/06/2024
[Latch] I own two other of their cases the 935 and I just love their cases. This one fits my aputure 300 II, forza 300, forza 60, and 3 micro v batteries. Happy to have one case vs 3-4 of the light cases carrying around. 5

Michael	12/06/2024
[Latch] I have several cases by different manufacturers, This brand is the best of what I have. 5

GJ	07/06/2024
[33.76 lb] This is not a case for those unable to lift heavy objects. Because of it's size and capacity it's heavy to move when loaded. I use it to store all my gear in one place and will rarely take it on the road, most likely taking what I need for each trip. It is robust, well-made, secure and the divider set and optional lid organizer are excellent. My one criticism is that there aren't enough compartment dividers included and you can't buy them separately. I really could use 2 more long dividers for my case but I just can't get them other than buying a whole new set at $220. Not going to happen! 5

George	01/06/2024
[Yes] The build quality of the Nanuk 963 is unbelievable, providing great mobile protection for three large Photogenic moonlights and accessories plus extra electric chords that would be needed on location work. You seldom find a product that you think could be built lighter and still provide adequate protection if you are doing the transport yourself; this case is of the build quality that it would survive the roughest handling a transport company could dish out with more than adequate protection of items enclosed. 5

Drake	15/04/2024
[Latch] Just what I needed for my black magic 6k Rig. Instead of tearing down the rig after every shoot I just put it in here, super secure, the foam comes out in layers so it's super convenient if you have height issues with your equipment. 5