The DPA MMP-ES Modular Active Side Cableby DPA MMP-ES Modular Active Side Cableis a microphone preamp. It is used with any modular capsule for capturing audio in applications such as with hanging mics or low-profile table or instrument mics. The MMP-ES features a high quality preamp built with a 12mm housing and a 3-pin XLR connector. The capsule attaches to a cable with a length of 3 meters or optionally up to 30 meters. The preamp features impedance balancing with active drive to reject radio frequency interference. This model is built with a side mounted cable.

Great for Hanging and Table Microphones    Short 12mm Housing    Built-In 3 Meter Cable

The preamp is ultra transparent and features the DPA designed impedance balancing with active drive to reject radio frequency interference

Can be combined with any DPA modular capsule

Related Questions and Answers

Q: 1. Will it fit a Sennheiser MKE 2?

A: The Viviana Beetle Modular Lav Concealer for DPA 6060 and Sennheiser MKE 1 (Black), B&H # VIBDPA6060BK, will fit the Sennheiser MKE 2 lavalier microphone.

Q: 2. Would I be able to reverse this lens hood and store it backwards on the rf 50mm f/1.8 STM lens for storage?

A: Yes you can store the lens hood in reverse on the lens.

Q: 3. Will this cable work between Mac mini 2023 HDMI output to DisplayPort input of computer monitor?

A: No, the Kramer DisplayPort Male to HDMI Male Active Cable (6') is a directional cable only for going from a DisplayPort output on a computer to an HDMI input on a monitor. To connect a computer's HDMI output to a monitor's DisplayPort input, you would need an HDMI to DisplayPort adapter, like the IOGEAR 4K HDMI to DisplayPort Adapter (B&H # IOGHDMDPFB), and a DisplayPort cable, like the Pearstone DisplayPort 1.2a Cable with Latches (6') (B&H # PEDPDD1206).

Q: 4. Will this cable work with a sonnet breakaway box 750?

A: Yes, this Xcellon Thunderbolt 3 Cable (6.6', 40 Gb/s, Active) will work with a sonnet breakaway box 750.

Q: 5. Is this the exact replacement cable for the DPA 6066, beige, service connector from the mic boom to wired TA4F?

A: This DPA Microphones Microphone Cable is designed for the DPA D:Fine headset microphone with an S2 connection. It is not intended for the DPA 6066.

Q: 6. Macbook Pro M1 HDMI output to DisplayPort on the monitor. Will this work?

A: No, this Xcellon DisplayPort to HDMI 4K Active Adapter Cable will not work in that case. This adapter works from a Displayport source to an HDMI monitor.

Q: 7. Can these used for Canon RF 50mm F1.2 lens?

A: No, the appropriate hood for that lens is the ES-83. You can click the link below to view; https://bhpho.to/2KBvASG

Q: 8. what is meant by passive or active transfer?

A: Active cables/adapters have a chip (semiconductor) to boost the performance of the device they are connecting to. If there is no chip, the cable/adapter is considered as passive. Using Active powered USB-C cable it is able to maintain and amplify the data signal with perfect reliability, over a longer distance than a passive USB-C cable. Active Thunderbolt (USB-C) Cable 40Gbps up to 2m (6.6ft), Passive Thunderbolt (USB-C) Cable 40Gbps if under 0.8m (2.6ft), 20Gbps if over 0.8m (2.6ft).

Q: 9. Will this cable work with the ASUS ProArt PA329C 32" 16:9 4K HDR IPS Display?

A: Yes, this cable is perfectly compatible.

Q: 10. Will this work on Canon EF 50mm f/1.8 II?

A: NO, The correct lens hood for the older EF 50mm 1.8 II is the Canon ES-62 which must be used with the 62L adapter. The ES-68 hood will ONLY fit the EF 50mm f/1.8 STM. It has a bayonet mount and will not fit any other lens. The older EF 50mm 1.8 II has no bayonet mount for a hood. You should use the 62L adapter which screws on to the 52mm filter threads and then mount the ES-62 hood. You could also use any generic 52mm screw on hood.