This SKB Custom Case for DK7 Gen 2 from Earthworks has been specifically created to house and protect the seven-piece drum microphone set and is identical to the one originally included in the mic package; it is available as a replacement, should the original become lost or damaged. Touring musicians will be delighted to find this smaller second-generation road case is more rugged, more durable, and easier to pack, load, and ship than the original.

The interior is made of high-quality, custom-cut PE foam, while the exterior is fashioned from high-strength polypropylene copolymer resin. Note the gasketed, waterproof, airtight, and submersible design, which is rated IP67 waterproof and dustproof. The case is also resistant to corrosion and impact damage. A molded-in hinge, patented trigger-release latch system, over-molded cushion-grip handle, and automatic ambient-pressure-equalization valve (MIL-STD-648C) all contribute to its military-grade design.

Custom Foam Cut Outs for DK7 Gen 2    Fits Complete 7-Piece Drum Mic Kit    Smaller and More Rugged Gen 2 Design    Rated IP67    Waterproof, Airtight, and Submersible    Military-Grade Construction & Design    Pressure-Equalization Valve    Over-Molded Cushion-Grip Handle

Related Questions and Answers

Q: 1. Will the slots hold a wider microphone like a Sennheiser e906 or e609, or would it sit proud of the top of the foam?

A: No, the microphone holders in the SKB MC24 Waterproof Twenty Four Mic Case will not accommodate the size and form factor of the Sennheiser e 906 or e 609 Microphones.

Q: 2. Can this SKB Roto-Molded Tripod Case (24 Tall) be used as checked baggage on airlines?

A: Hi Lynette, Yes, you can check these at the airport although there are better solutions if you tend to fly with this gear a lot. These tripod cases have clips keeping the lid on so if the case gets hit in just the right way it could open the lid. If you were consistently checking these for fly dates then I would recommend our 3i-3613-12BE (empty), 3i-3613-12BL (with foam)or 3i-2213-12BE (empty), or 3i-2213-12BC (with foam). These options are made to take much more abuse from being shipped or checked on airlines. Also these options have pull out handle and wheels where the 1SKB-R2411 does not. If you purchase any of these cases empty or use the 1SKB-R2411 I would recommend putting the tripods and heads in sleeves or padded bags if flying. That will help so that the gear does not get scratched. Thank you,Will

Q: 3. Anyone know if it will fit the Westcott 32inch Rapid Box duo collapsible beauty dish with a compact tripod? Is it perfectly cylindrical inside?

A: It's more of an octagon.

Q: 4. How many tripods can it hold

A: There is no specific number of tripods that may be stored inside the SKB Roto-Molded Tripod Case with Wheels (50"); it would depend on the size of the tripods in question. That being said, the interior dimensions of the tripod case is 50 x 11 x 11"(127 x 27.9 x 27.9 cm). The SKB Roto-Molded Tripod Case with Wheels (50") would be able to store however many tripods that fit these internal dimensions.

Q: 5. What kind of phantom amp would be recommended for this microphone?

A: The Earthworks M50 requires +48 volts phantom power in order to operate. There are several portable battery powered, as well as AC powered units available. The ART Phantom I is a solid single channel solution. a href= http://bhpho.to/1Amcmmn target= _blank http://bhpho.to/1Amcmmn/a

Q: 6. I have a tripod that's 38 long and about 9 wide. I'm wondering how much foam is in either end of this 41 SKB case (1SKB-R4111W) and whether or not I would be better off with the 42 case (1SKB-R4209W) that's longer but only 9 wide (the 41 is 11 wide)... would that one be too tight a fit width wise I wonder? Any thoughts?

A: I just measured the inside of the case and with the foam on the top and bottom you only have about 37 of space length wise.

Q: 7. Are the size specs listed on B&H for the 34 case accurate (38.25 x 12.75 x 14.00 and 15lbs)? As stated, it would appear this is slightly bulkier and heavier then the 37 model.

A: Hi Shaun, That is correct. The reasoning for that is the 37 tripod case (1SKB-R3709W) has a diameter of 9 vs. the 1SKB-R3411W which has a diameter of 11 . In production they used a touch more plastic in the 1SKB-R3411W which put the weight of the 1SKB-R3411W tripod to 15 lbs. Thank you,Will

Q: 8. Does this have a strong plastic or PBA type smell when purchased new?

A: There is little to no odor emitting from this case when it is new.

Q: 9. Is the interior dimensions measured with or without the foam?

A: That is with the foam.

Q: 10. What is the diameter of the tip, for SLP calibrator adapters?

A: The capsule diameter of the Earthworks M30 is 5.8 mm.