Protect your Canon EOS R5, R6, R5 C or R mirrorless camera and add a variety of accessories with this raven black Kondor Blue Base Rig MK II for Canon R5 R6 R6II R Blackfrom Kondor Blue. The cage features an Arca-type quick release baseplate system for quick mounting and release of the camera and cage onto a rig. This full cage incorporates NATO rails, a shoe mount, and multiple 1/4"-20, 3/8"-16, and ARRI-style threads for additional accessory mounting choices.

This durable cage protects your Canon R5, R6, R5 C or R camera while maintaining access to its ports, slots, and controls. It features an integrated HDMI/USB Type-C clamp to protect the cables from pulling during operation.

Camera Cage for Canon R5/R6/R6II/R    Top Handle with Run/Stop Button    ARRI-Style Baseplate    501-Type QR Plate Included    2 x 8" PPSH 15mm Rods

Canon EOS R5, R6, and R mirrorless cameras

Rapidly remove the camera from the cage for stills, handheld, or gimbal use

The cage remains solidly mounted to the camera to prevent wiggle and allow for large setups

NATO rails on the side and top of the cage

A safety pin prevents sliding issues that plague shoe accessories

A cable clamp prevents damaging the micro-sized ports on the camera and losing signal

There are numerous 1/4"-20 and 3/8"-16 accessory mounting threads around the cage

3/8"-16 threads with locating pins on every side of the cage prevent twisting

The cage leaves open access to buttons, dials, cable ports, and battery/card doors

Protect the camera from a variety of drop angles

Related Questions and Answers

Q: 1. I'm trying to find a Really Right Stuff camera plate (non-L-plate) for the R5 with battery grip, but I can only find the L-Plate. Can I buy that from you B&H?

A: We do not currently sell a plate for the grip made by RRS but you can use this Kirk plate instead: https://bhpho.to/3vOtZ1r

Q: 2. will this grip work with the new Canon r5 mark ii?

A: The Vello Battery Grip for Canon EOS R5 C, R5, R6 II, and R6 Mirrorless Cameras is incompatible with the Canon EOS R5 Mark II Mirrorless Camera.

Q: 3. Is it compatible with Really Right Stuff Ball Head Clamp?

A: It can work as long as the RRS ball head as a twist lock release.

Q: 4. is it compatible with the r6 mark II?

A: The SmallRig "Black Mamba" Handheld Kit for Canon EOS R5 C/R5/R6 is also compatible with the Canon EOS R6 MKII.

Q: 5. Will the RRS plate fit on Manfrotto Befree Advanced Travel Aluminum Tripod with 494 Ball Head (Twist Locks)? If not, what do you recommend (travel tripod) for Canon R5?

A: Unfortunately, it will not, as it uses the 200PL/200PLPRO style of plate. Any travel tripod that uses the arca-swiss style will suffice, like the Oben, Sirui, Peak Design, and new RRS travel tripod. :)

Q: 6. Bought this plate and there is two small bosses on the bottom that don’t fit the camera holes??

A: Unfortunately, I am not sure what you mean by "two small bosses on the bottom" of the camera plate. In any case, the Really Right Stuff Base Plate for Canon EOS R5 and R6 Mirrorless Camera has a single built-in standard threaded 1/4"-20 male mounting screw on the plate which would screw into the female-threaded 1/4"-20 tripod socket on the bottom of the Canon EOS R5 or R6 Mirrorless Digital Camera. The plate may also have an accessory female 1/4"-20 threaded socket and a QD (Quick Detach) socket for an optional QD strap on the base of the unit, but it would connect to the camera via the 1/4" tripod socket.

Q: 7. Does this fit the R6 Mark II?

A: The Really Right Stuff Base Plate for Canon EOS R5 and R6 Mirrorless Camera is compatible with the Canon EOS R6 Mark II Mirrorless Camera.

Q: 8. Does this happen to fit the R5 Mark II?

A: The Really Right Stuff Base Plate for Canon EOS R5 and R6 Mirrorless Camera is not compatible with the Canon R5 Mark 2 camera.

Q: 9. RRS website shows two plates for R5 one for $40- camera only and camera with Battery Grip was $70-. So is this one for camera only and marked up considerably by B&H?

A: So on RRS's website, if you select the options for the base plate for the R5 without battery grip, it is the same price that B&H sells it for. If you select the R5 with battery grip and L bracket, it is also the same price that B&H sells it for. the only variation that we don't sell unfortunately is just the single sided plate for the R5 with battery grip. Over all, the prices are the same as on the RRS website and there is no mark up.

Q: 10. Is there a way to add a Peak Design Anchor Connector to allow the use of the Peak Design Clutch?

A: The Peak Design Anchor Mount can be attached to the 1/4 20" mounting receiver on the bottom of the Falcam Quick Release Camera Cage Base V2 for Canon EOS R5/R6/R6 II.