With its compact size, the ASUS NUC 14 Pro Tall Barebone Kit | Compact PCcan fit into a variety of spaces and be customized to help you stay productive. Inside the toolless chassis is a 1.4 GHz Intel Core Ultra 7 165H 16-Core processor with integrated graphics to get you started.

The two DDR5 SO-DIMM slots support up to 96GB of memory. For storage, you have an M.2 2280 PCIe 4.0 slot alongside an M.2 PCIe 3.0 2242 slot and a 2.5" drive bay. This system also includes built-in Wi-Fi 6E support and a 2.5G Ethernet port for high-speed internet access. Dual Thunderbolt 4 ports, along with a front-facing USB-C 3.2 Gen 2x2 and dual USB-A 3.2 Gen 2 ports, allow you to quickly transfer large videos, photos, and other files. This kit is Windows 11 OS ready. A US power cable is included.

1.4 GHz Intel Core Ultra 7 165H 16-Core    2 x 5600 MHz DDR5 SO-DIMM Slots    Integrated Intel Graphics    M.2 2280 PCIe 4.0 | M.2 2242 PCIe 3.0    1 x 2.5" Drive Bay    Wi-Fi 6E (802.11ax) | Bluetooth 5.3    Thunderbolt 4 | HDMI 2.1 | USB-C | USB-A    Connect up to Four Displays    Includes US Power Cord    Windows 11 OS Ready

The Intel Ultra Core 7 165H processor powers applications with six Performance cores while eight Efficient cores and two Low Power Efficient cores handle background tasks. The Performance cores have a base speed of 1.4 GHz and can be boosted up to 5 GHz. A built-in Neural Processor (NPU) accelerates AI workloads.

There are two dual-channel DDR5-5600 SO-DIMM slots available, supporting up to 96GB. There is also an M.2 2280 PCIe 4.0 x4 slot and an M.2 2242 PCIe 3.0 x4 slot alongside a 2.5" drive bay.

A front-facing USB-C 3.2 Gen 2x2 port allows you to transfer up to 20 Gb/s with compatible devices. The front panel also includes two 10 Gb/s USB-A 3.2 Gen 2 ports. The rear panel includes two Thunderbolt 4 slots, a USB-A 3.2 Gen 2 port, and one USB-A 2.0 port.

Thunderbolt 4 is a hardware interface that utilizes the reversible USB-C connector and features a maximum throughput of 40 Gb/s when used with compatible devices. The connector also transmits data via USB4 at up to 20 Gb/s, and dual-bandwidth DisplayPort allows you to connect either one 8K monitor or up to two 4K displays simultaneously. Additionally, you can daisy chain up to six devices from a single Thunderbolt 4 port.

Wi-Fi 6E (802.11ax) support provides access to the less congested 6 GHz band with compatible wireless networks. The 2.5G Ethernet port provides a fast and reliable wired internet connections.

Enhance your workflow by connecting up four displays through the dual HDMI and two Thunderbolt 4 ports.

Related Questions and Answers

Q: 1. Is this compatible with the bh-30 or bh-40?

A: Yes, the RRS BH-30 or BH-40 would be fine to use with the Ascend-14 Compact Travel Carbon Fiber Tripod.

Q: 2. Will this fit a 16in. MacBook Pro?

A: Yes the Tether Tools Aero Traveler Pro will fit a 16" MacBook Pro

Q: 3. is it compitable with mac?

A: The mixer will connect to most computers with the proper analog cable connections. There is no direct communication with the computers OS that will require compatibility.

Q: 4. How do I get the copylight onto the holder that slides onto the horizontal bars? It appears the round piece should slide all the way into the round section on the edge of the copylight and then the knob secures it, but I can't get it to go past the edge of the inside hole (if that makes any sense). Thanks for your help.

A: If you are still having an assembly problem, try to completely remove the tightening nob on horizontal bar, that may give you the clearance you need. If all else fails, try getting Tech Support at Beseler You may replacement parts. Their Number is 800-237-3537

Q: 5. I intend to use this product with my RRS BH-55 Ball Head with Lever-Release Clamp. Are these two compatible with each other? As opposed to the screw knob model, the clamp model is not adjustable. I am worried that the clamp will not close all the way if it’s too tight or it may be a loose fit. Thanks in advance.

A: Unfortunately, we cannot confirm if the Kirk QRLB-T Universal Quick Release Tall L-Bracket would be compatible for use with the Really Right Stuff BH-55 Ball Head with Full-Size Lever-Release Clamp. According to Really Right Stuff's website, only Really Right Stuff and Wimberley plates and rails are guaranteed to work with Really Right Stuff lever-release clamps. Kirk Arca-type plates would be compatible for use with the Really Right Stuff screw-type clamps, but they do not indicate compatibility with the lever-type clamps.

Q: 6. Is this l-bracket suitable to use with for a Fuji XT4?

A: Yes it fits the Fuji XT4 with battery grip and also an arca compatible plate must be connected to the grip.

Q: 7. I intend on using this for rare book photography. Do the lights in this kit provide even lighting?

A: I use this kit for photographing moth and butterfly specimens. Since the specimens are pinned, they sit about an inch above the base of the background. I've had an issue with shadows and have had to bring in external lamps to eliminate the shadows. As long as your subject is flat on the base, you shouldn't have too much of an issue. It is convenient that the kit allows the light arms to move around, so you can tweak them to make the lighting just right.

Q: 8. Built-in effects?

A: No

Q: 9. where is the tap to" turn the taps to convert the speaker to a The speaker 32W? "with externally adjustable taps at 8, 16, and 32W for use with distributed sound systems

A: The switch is located on the underside of the “domed” section of the head unit near outer edge.

Q: 10. Is the gain from this mixer sufficient for use with vintage ribbon microphones, such as the RCA77Dx? Thanks.

A: Tough to tell. I use a Heil PR 40 and do have to crank up the gain a bit. Great mixer and clean sound. Its worth giving it a try.