Dji Mini 4 Pro 360° Propeller Guard

Product Code: eq166237
Availability: In Stock

$87.00 $105.27

Qty

8 reviews Write a review

Description
Reviews (8)

For additional safety when flying indoors or near people, use the DJI Mini 4 Pro 360° Propeller Guardfrom DJI. The guard fully surrounds the Mini 4 Pro's spinning propellers, protecting bystanders and property from direct contact with the propellers in the case of an accident. Please note that the Mini 4 Pro must have firmware v01.00.0100 or later, built-in obstacle avoidance can no longer be used with the guard installed, and the guard can't be used with the Intelligent Flight Battery Plus due to weight considerations.

For DJI Mini 4 Pro Drones 360° Coverage around Propellers Protect People & Property from Harm

General
Compatibility	DJI Mini 4 Pro
Physical
Dimensions	16.2 x 13.2 x 4.5" / 411.6 x 335 x 115 mm (Overall (After Installation)) 3.8" / 97 mm (Radius)
Weight	1.5 oz / 42 g (One Side)
Packaging Info
Package Weight	0.59 lb
Box Dimensions (LxWxH)	13.5 x 11.6 x 2.2"

Related Questions and Answers

Q: 1. Does it work with the DJI focus motors?

A: No, the DJI RS 3 Mini Gimbal Stabilizer does not support the DJI Ronin series focus motors.

Q: 2. Can this be mounted on a tripod or monopod?

A: The DJI Mini 3 Gimbal Stabilizer has a 1/4 20" receiver on the bottom of the handle for mounting purposes, including a monopod.

Q: 3. why call it smart?

A: DJI flight batteries are referring to as intelligent flight batteries due built-in Battery Management System, battery status is monitored and reported in real time, allowing you to focus less on power levels and more on flying. It also features overcharging and overdischarging protection as well as low-temperature protection.

Q: 4. I saw on DJI website it supports the Canon R5, does that also mean the R5C? I did not see it listed and it should support the weight since the cameras are similar. Will it have the same functionality and gimble controls?

A: The Canon R5C is currently not listed as supported on the DJI RS3 Mini. Only the DJI RS3 Pro lists the R5C as supported at this time. The R5C is a larger camera than the R5. Compatibility link - https://bit.ly/3W2W0ic

Q: 5. I don't see Fuji X-T5 listed as being compatible with the DJI RS 3 Mini. Is the X-T5 compatible?

A: At this time, DJI does not list compatibility for the electronic functionality of the Fuji X-T5 with the Ronin (RS) stabilizers. However, the gimbal would be able to balance the camera for the primary purpose of stabilization with an appropriate lens combination (under the 4.4lbs payload). There may be a firmware update in the near future to add electronic functionality.

Q: 6. Will this work with Sony FX30 along with the Sirui 35mm 1.8 apsc lens? Whats the limit payload?

A: The Sony FX30 Digital Cinema Camera and the Sirui 35mm f/1.8 Anamorphic 1.33x Lens can mount and balance on the DJI RS 3 Mini Gimbal Stabilizer. The gimbal can handle up to 4.4 pound payloads.

Q: 7. List of compatible cameras?

A: This is the latest compatibility list for all of DJI's gimbal models. DJI gimbal compatibility list - https://bit.ly/3W2W0ic

Q: 8. Is there a way to convert the joystick to move the focus point box on the camera screen?

A: It depends on the camera model as to what control options are offered. DJI compatibility chart - https://bit.ly/3HeemZw

Q: 9. Would this work with my Sony Alpha a6100?

A: Yes, the DJI RS 3 Mini Gimbal Stabilizer will support and control the SONY A6100 camera. Compatibility and tested lenses for the A6100 from Sony: https://bhpho.to/4a5sujv

Q: 10. Will this work with a Fuji H2? I see the H2s listed juts not sure if there are any missing functions when using the H2

A: The Fuji H2 has not been tested with the DJI RS3 Mini. However, The Fuji H2 also has USB-C connections and should be compatible with control. It should have the same overall control as the H2s. DJI compatibility link https://bit.ly/3w0sor8

Dmytro	12/08/2024
[0.59 lb] I bought it after changed a few propellers. Sometimes obstacle sensors don't see something like a dry branch and I think this one can help me. But it is a little bit larger than I think(I cant pack it in my fly more combo bag) and should be used in a crowded place or indoors to protect people and other staff from the drone. If you operate your drone outdoors with this one you should reduce your speed and fly radius. So, what I want to say - if you operate you drone in the place where you can't hurt other people, better without this protection. You drone more lightweight and more controllable. 5

Carmen	08/08/2024
[0.59 lb] lo probé y funciona muy bien. recomendado 5

Ryan Berridge	15/07/2024
[0.59 lb] Used during a fireworks display. Simple and easy to install and take off. 5

Stephan	13/06/2024
[0.59 lb] When you are spending a lot of money for a drone, why not protect it (and your fingers and others from danger)? The investment in a propeller guard is low and the peace of mind is high. I'm sure there is some reduction in speed and range - but I haven't noticed it. Steve Leimberg/UnSeenImages.Com 5

Jose	28/05/2024
[0.59 lb] Frame extra en buen precio 5

Taka	24/05/2024
[0.59 lb] I didn't realize how easy to replace until I had to replace one - my card slot cover broke as it was half-open before the flight and it touched the propeller, destroyed the cover. OK I had to watch a YouTube video but it was really not that hard. Screws are small yes, but if you watch the YouTube video by DJI you can do it too. Have a very good screw driver set though. 5

Sathishkumar	08/04/2024
[0.59 lb] I recently purchased the DJI 360° Propeller Guard for my Mini 4 Pro, and it has proven to be a valuable addition to my drone accessories. The primary reason for getting this propeller guard was to enhance the safety of my drone during flights, and it has not disappointed. The design is well-thought-out, providing a full 360° protection for the propellers. This is particularly important for beginners or those flying in confined spaces, as it minimizes the risk of collisions and damage to the propellers. Installation was a breeze, and it didn't compromise the overall aesthetics of my Mini 4 Pro. The propeller guard is made from durable materials, and it feels sturdy enough to withstand minor impacts. While it adds a bit of weight to the drone, I didn't notice any significant impact on the flight performance. One thing to note is that it's crucial to ensure the propeller guard is securely attached before takeoff. This might take a bit of practice, but it becomes easier with each use. I appreciate that DJI has considered the safety aspect without sacrificing the maneuverability of the drone. The propeller guard doesn't hinder the drone's agility, and I still have the freedom to capture stunning aerial footage without worrying about potential accidents. Overall, the DJI 360° Propeller Guard for Mini 4 Pro is a worthwhile investment for anyone looking to prioritize safety during drone flights. While it may take some getting used to, the added protection for both the drone and its surroundings is well worth it. Fly with confidence and peace of mind!. Thanks again B&H, I love it. 5

Don	06/04/2024
[0.59 lb] These guards are pretty robust/durable but it is nice to have a replacement set for those occasional harsh impacts. These are a direct install since they are factory from DJI. Good price and free shipping from B&H make this purchase a no brainer. 5