Drive power to your system with the robust NZXT C1000 Gold ATX 3.1 Power Supply Whitefrom NZXT. Designed for high-end gaming builds and workstations alike, the C1000 boasts immense wattage to handle a variety of demanding tasks while balancing throughput, optimizing power and efficiency.

Equipped with a single +12V 1000W rail and meeting ATX12V version 3.1 compliance, you get ample power to operate your resource-demanding components. Thanks to the modular form factor, you can pick and choose the cables you need for your system, saving space and leaving ample room for airflow. Traditional 24-pin, 4+4-pin, and 8-pin motherboard connectors are included alongside the 12 SATA and four peripheral connectors for your storage drives and devices. Supporting graphics cards are three 6+2-pin PCIe connectors while one 16-pin 12VHPWR connector is reserved for high-powered NVIDIA 40 Series graphics cards, sending a dedicated 600W to the GPU.

1000W Single +12V Rail    135mm Fluid Dynamic Bearing Cooling Fan    Intel ATX12V Version 3.1    1 x 12VHPWR Connector    3 x 6+2-Pin PCIe Connectors    12 x SATA Connectors    4 x Peripheral Connectors    Modular Cable Design    80 PLUS Gold Efficiency

Backed by the 80 PLUS Gold rating, you can ensure the C1000 operates at maximum efficiency with up to 91.9% and 89.3% at half and full loads, respectively. This ensures that your energy and power consumption isn't wasted.

Inside the metal housing of the power supply is a 135mm cooling fan equipped with magnetic levitation bearings for a smooth and fast operation that keeps the capacitors well within thermal range. This fan operates at a max speed of 2300 rpm with 93.02 CFM airflow while retaining a low-noise level of 44.5 dBA at max load, ensuring enhanced cooling while remaining quiet.

Measuring 6.2-inches in length, the C1000 can easily fit in a variety of cases both big and small without sacrificing performance.

Related Questions and Answers

Q: 1. would this work ok if i pluged the usb end to the anker powercore 26800PD battery? instead of using the wall out let?

A: A USB power source of 5V / 3A is recommended. Anker has a few versions of that battery, but I believe all of them have that output.

Q: 2. Is this compatible with the D500?

A: Unfortunately no but this Bescor would be compatible: https://bhpho.to/3FO0OD9

Q: 3. will it work for D850?

A: Yes this can work with the Nikon D850.

Q: 4. This will power the GH4 continuously?

A: Yes, the GyroVu USB to Panasonic DMW-BLF19 Dummy Battery Intelligent Cable with 3.1A Power Supply is meant to function as an AC Adapter and power your camera continuously. It will give you a steady charge while you are shooting/filming.

Q: 5. Will this work with ZV-E10?

A: Yes this will also work with the ZV E10 as it will work with any camera with a Sony NP-FW50 battery.

Q: 6. Will this work with a Canon 5D Mark IV that takes LP-E6 batteries?

A: Yes, the GyroVu USB to Canon LP-E6 Dummy Battery Intelligent Cable with 3.1A Power Supply works with the Canon 5D Mark IV.

Q: 7. A7SIII compatible?

A: No the selection you picked is for other Sony cameras, you will need to choose the FZ100 option in the drop down box.

Q: 8. Will this Work with the Nikon MB-N10 Battery Pack?

A: Yes, it can work with that battery pack.

Q: 9. Does this product works with the Sony a7s ii ?

A: Yes this would work with the Sony A7SII.

Q: 10. can this use a usb DC power bank as an input?

A: For proper operation of the USB to Dummy Battery adapter cable please use USB power source with at least 2.0 Amp output (3.0 Amp output recommended). The power banks and USB power supplies if not specified are usually providing 1.0 Amp outputs. You need to use power source from reliable manufacturer with specified 2.0 Amp output for this adapter to function properly. Recommended power sources for this model: GyroVu GV-PB-301 GyroVu GV-PBID-401