Great for indoor installations, the white BASSBOSS DiaMon Passive is a non-powered, compact, high-output, point-source loudspeaker that can be used in a variety of applications including mains, monitors or as satellites and fills throughout a nightclub or installation.

The DiaMon-Passive requires 1200W of bi-amplification to power the 12" woofer and 3" compression driver, which deliver a combined frequency response of 80 Hz to 18 kHz and a maximum 126 dB SPL, plenty of volume for a small to mid-sized event. The coaxial configuration places the compression driver within the center of the woofer which ensures phase accuracy for clear, intelligible sound at any level.

Note: Requires BASSBOSS pre-programmed amplifier with embedded signature DSP.

Highly Portable, Lightweight & Compact    80 Hz to 18 kHz Frequency Response (±3)    126 dB Peak SPL    1200W Power Handling    12" Woofer & 3" High Frequency Driver    80° Conical Coverage    Extensively Braced Baltic Birch Enclosure    Waterproof Finish with Coated Woofers    Includes Neutrik powerCON True1 Cable

• The cabinet is made from Birch plywood, which is strong and solid, and the small size makes it very easily portable. The small size is made possible by the use of a co-axial driver in a sealed enclosure. With the high-frequencies exiting co-axially through the center of the woofer, no extra space is required for the addition of a high-frequency horn.
• The low and midrange frequencies are produced by a high-sensitivity 12” cone woofer with a 3” voice coil and a neodymium magnet. The same magnet is used for the 3” diaphragm high-frequency compression driver, the 1.4” output of which passes through the woofer’s pole-piece. The inner surface of the pole-piece is machined into the shape of a horn. The woofer cone is the continuation of that horn, making it possible to generate very high output from a very small total surface area.
• The resulting coverage pattern is 80° conical, permitting a large coverage area and a great deal of placement options. A significant advantage of co-axial loudspeakers is the consistency of their off-axis response. Aside from delivering a more consistent and intelligible sound field, this also makes them much more resistant to feedback.

Related Questions and Answers

Q: 1. Can this be used for prints as well?

A: The SIMPLICITY Stop Bath from Ilford is a pre-measured portion of ILFOSTOP liquid concentrate stop bath, delivered in a single-use sachet, which is enough to process exactly one roll of 120 or two rolls of 35mm film in a two-reel, 600mL developing tank. While the stop bath may work for RC paper, I would not recommend it as there is not enough for multiple printing needs.

Q: 2. Can this hold a 5D IV with a canon 100 mm macro lens?

A: Unstable w/ even the 50D w/ non-L 18-250 lens. Definitely not recommend for 5D w/ any lens.

Q: 3. It was already asked I think but is it 10 feet wide & 12 feet tall? I am ordering 12x12 stands & this if its 10' W & 12' Tall.

A: You are correct.

Q: 4. How much weight will the Savage Port-A-Stand support?

A: The Savage Port-A-Stand would be able to support up to 25 lbs.

Q: 5. I am looking for a 12 inch diffuser with a cover that gives you silver and gold. Does this item exist?

A: I bought collapsible 12 diffuser soft gold/white last year from B&H Photo. So, yes, the item exists. Good luck.

Q: 6. is the top rod adjustable? What is the max width it can be?

A: The cross bar in this kit can extend to a maximum of 125 inches.

Q: 7. Does it work for paper backgrounds?

A: This item will work with paper backgrounds.

Q: 8. the background that comes with this kit is it machine washable?

A: Yes it is I wash it after every use

Q: 9. What is the length of the crossbar in the Port-A-Stand? Also, is the crossbar one solid piece, or a snap together, or other?

A: The corssbar has a max width of 10.6'. It is telescopic.

Q: 10. What is the maximum amount of weight this stand will support (background wise)

A: The stand in this kit can support up to 20 lbs.